servicecontrol

type CheckError struct {
	// Code: The error code.
	//
	// Possible values:
	//   "ERROR_CODE_UNSPECIFIED" - This is never used in `CheckResponse`.
	//   "NOT_FOUND" - The consumer's project id was not found.
	// Same as google.rpc.Code.NOT_FOUND.
	//   "PERMISSION_DENIED" - The consumer doesn't have access to the
	// specified resource.
	// Same as google.rpc.Code.PERMISSION_DENIED.
	//   "RESOURCE_EXHAUSTED" - Quota check failed. Same as
	// google.rpc.Code.RESOURCE_EXHAUSTED.
	//   "SERVICE_NOT_ACTIVATED" - The consumer hasn't activated the
	// service.
	//   "BILLING_DISABLED" - The consumer cannot access the service because
	// billing is disabled.
	//   "PROJECT_DELETED" - The consumer's project has been marked as
	// deleted (soft deletion).
	//   "PROJECT_INVALID" - The consumer's project number or id does not
	// represent a valid project.
	//   "IP_ADDRESS_BLOCKED" - The IP address of the consumer is invalid
	// for the specific consumer
	// project.
	//   "REFERER_BLOCKED" - The referer address of the consumer request is
	// invalid for the specific
	// consumer project.
	//   "CLIENT_APP_BLOCKED" - The client application of the consumer
	// request is invalid for the
	// specific consumer project.
	//   "API_KEY_INVALID" - The consumer's API key is invalid.
	//   "API_KEY_EXPIRED" - The consumer's API Key has expired.
	//   "API_KEY_NOT_FOUND" - The consumer's API Key was not found in
	// config record.
	//   "NAMESPACE_LOOKUP_UNAVAILABLE" - The backend server for looking up
	// project id/number is unavailable.
	//   "SERVICE_STATUS_UNAVAILABLE" - The backend server for checking
	// service status is unavailable.
	//   "BILLING_STATUS_UNAVAILABLE" - The backend server for checking
	// billing status is unavailable.
	Code string `json:"code,omitempty"`

	// Detail: Free-form text providing details on the error cause of the
	// error.
	Detail string `json:"detail,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Code") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type CheckRequest struct {
	// Operation: The operation to be checked.
	Operation *Operation `json:"operation,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Operation") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type CheckResponse struct {
	// CheckErrors: Indicate the decision of the check.
	//
	// If no check errors are present, the service should process the
	// operation.
	// Otherwise the service should use the list of errors to determine
	// the
	// appropriate action.
	CheckErrors []*CheckError `json:"checkErrors,omitempty"`

	// OperationId: The same operation_id value used in the
	// CheckRequest.
	// Used for logging and diagnostics purposes.
	OperationId string `json:"operationId,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "CheckErrors") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type Distribution struct {
	// BucketCounts: The number of samples in each histogram bucket.
	// `bucket_counts` are
	// optional. If present, they must sum to the `count` value.
	//
	// The buckets are defined below in `bucket_option`. There are N
	// buckets.
	// `bucket_counts[0]` is the number of samples in the underflow
	// bucket.
	// `bucket_counts[1]` to `bucket_counts[N-1]` are the numbers of
	// samples
	// in each of the finite buckets. And `bucket_counts[N] is the number
	// of samples in the overflow bucket. See the comments of
	// `bucket_option`
	// below for more details.
	//
	// Any suffix of trailing zeros may be omitted.
	BucketCounts googleapi.Int64s `json:"bucketCounts,omitempty"`

	// Count: The total number of samples in the distribution. Must be >= 0.
	Count int64 `json:"count,omitempty,string"`

	// ExplicitBuckets: Buckets with arbitrary user-provided width.
	ExplicitBuckets *ExplicitBuckets `json:"explicitBuckets,omitempty"`

	// ExponentialBuckets: Buckets with exponentially growing width.
	ExponentialBuckets *ExponentialBuckets `json:"exponentialBuckets,omitempty"`

	// LinearBuckets: Buckets with constant width.
	LinearBuckets *LinearBuckets `json:"linearBuckets,omitempty"`

	// Maximum: The maximum of the population of values. Ignored if `count`
	// is zero.
	Maximum float64 `json:"maximum,omitempty"`

	// Mean: The arithmetic mean of the samples in the distribution. If
	// `count` is
	// zero then this field must be zero.
	Mean float64 `json:"mean,omitempty"`

	// Minimum: The minimum of the population of values. Ignored if `count`
	// is zero.
	Minimum float64 `json:"minimum,omitempty"`

	// SumOfSquaredDeviation: The sum of squared deviations from the mean:
	//   Sum[i=1..count]((x_i - mean)^2)
	// where each x_i is a sample values. If `count` is zero then this
	// field
	// must be zero, otherwise validation of the request fails.
	SumOfSquaredDeviation float64 `json:"sumOfSquaredDeviation,omitempty"`

	// ForceSendFields is a list of field names (e.g. "BucketCounts") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type ExplicitBuckets struct {
	// Bounds: 'bound' is a list of strictly increasing boundaries
	// between
	// buckets. Note that a list of length N-1 defines N buckets because
	// of fenceposting. See comments on `bucket_options` for details.
	//
	// The i'th finite bucket covers the interval
	//   [bound[i-1], bound[i])
	// where i ranges from 1 to bound_size() - 1. Note that there are
	// no
	// finite buckets at all if 'bound' only contains a single element;
	// in
	// that special case the single bound defines the boundary between
	// the
	// underflow and overflow buckets.
	//
	// bucket number                   lower bound    upper bound
	//  i == 0 (underflow)              -inf           bound[i]
	//  0 < i < bound_size()            bound[i-1]     bound[i]
	//  i == bound_size() (overflow)    bound[i-1]     +inf
	Bounds []float64 `json:"bounds,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Bounds") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type ExponentialBuckets struct {
	// GrowthFactor: The i'th exponential bucket covers the interval
	//   [scale * growth_factor^(i-1), scale * growth_factor^i)
	// where i ranges from 1 to num_finite_buckets inclusive.
	// Must be larger than 1.0.
	GrowthFactor float64 `json:"growthFactor,omitempty"`

	// NumFiniteBuckets: The number of finite buckets. With the underflow
	// and overflow buckets,
	// the total number of buckets is `num_finite_buckets` + 2.
	// See comments on `bucket_options` for details.
	NumFiniteBuckets int64 `json:"numFiniteBuckets,omitempty"`

	// Scale: The i'th exponential bucket covers the interval
	//   [scale * growth_factor^(i-1), scale * growth_factor^i)
	// where i ranges from 1 to num_finite_buckets inclusive.
	// Must be > 0.
	Scale float64 `json:"scale,omitempty"`

	// ForceSendFields is a list of field names (e.g. "GrowthFactor") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type LinearBuckets struct {
	// NumFiniteBuckets: The number of finite buckets. With the underflow
	// and overflow buckets,
	// the total number of buckets is `num_finite_buckets` + 2.
	// See comments on `bucket_options` for details.
	NumFiniteBuckets int64 `json:"numFiniteBuckets,omitempty"`

	// Offset: The i'th linear bucket covers the interval
	//   [offset + (i-1) * width, offset + i * width)
	// where i ranges from 1 to num_finite_buckets, inclusive.
	Offset float64 `json:"offset,omitempty"`

	// Width: The i'th linear bucket covers the interval
	//   [offset + (i-1) * width, offset + i * width)
	// where i ranges from 1 to num_finite_buckets, inclusive.
	// Must be strictly positive.
	Width float64 `json:"width,omitempty"`

	// ForceSendFields is a list of field names (e.g. "NumFiniteBuckets") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type LogEntry struct {
	// InsertId: A unique ID for the log entry used for deduplication. If
	// omitted,
	// the implementation will generate one based on operation_id.
	InsertId string `json:"insertId,omitempty"`

	// Labels: A set of user-defined (key, value) data that provides
	// additional
	// information about the log entry.
	Labels map[string]string `json:"labels,omitempty"`

	// Name: Required. The log to which this log entry belongs. Examples:
	// "syslog",
	// "book_log".
	Name string `json:"name,omitempty"`

	// ProtoPayload: The log entry payload, represented as a protocol buffer
	// that is
	// expressed as a JSON object. You can only pass `protoPayload`
	// values that belong to a set of approved types.
	ProtoPayload LogEntryProtoPayload `json:"protoPayload,omitempty"`

	// Severity: The severity of the log entry. The default value
	// is
	// `LogSeverity.DEFAULT`.
	//
	// Possible values:
	//   "DEFAULT" - The log entry has no assigned severity level.
	//   "DEBUG" - Debug or trace information.
	//   "INFO" - Routine information, such as ongoing status or
	// performance.
	//   "NOTICE" - Normal but significant events, such as start up, shut
	// down, or
	// configuration.
	//   "WARNING" - Warning events might cause problems.
	//   "ERROR" - Error events are likely to cause problems.
	//   "CRITICAL" - Critical events cause more severe problems or brief
	// outages.
	//   "ALERT" - A person must take an action immediately.
	//   "EMERGENCY" - One or more systems are unusable.
	Severity string `json:"severity,omitempty"`

	// StructPayload: The log entry payload, represented as a structure
	// that
	// is expressed as a JSON object.
	StructPayload LogEntryStructPayload `json:"structPayload,omitempty"`

	// TextPayload: The log entry payload, represented as a Unicode string
	// (UTF-8).
	TextPayload string `json:"textPayload,omitempty"`

	// Timestamp: The time the event described by the log entry occurred.
	// If
	// omitted, defaults to operation start time.
	Timestamp string `json:"timestamp,omitempty"`

	// ForceSendFields is a list of field names (e.g. "InsertId") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type LogEntryProtoPayload interface{}

type LogEntryStructPayload interface{}

type MetricValue struct {
	// BoolValue: A boolean value.
	BoolValue bool `json:"boolValue,omitempty"`

	// DistributionValue: A distribution value.
	DistributionValue *Distribution `json:"distributionValue,omitempty"`

	// DoubleValue: A double precision floating point value.
	DoubleValue float64 `json:"doubleValue,omitempty"`

	// EndTime: The end of the time period over which this metric value's
	// measurement
	// applies.
	EndTime string `json:"endTime,omitempty"`

	// Int64Value: A signed 64-bit integer value.
	Int64Value int64 `json:"int64Value,omitempty,string"`

	// Labels: The labels describing the metric value.
	// See comments on google.api.servicecontrol.v1.Operation.labels for
	// the overriding relationship.
	Labels map[string]string `json:"labels,omitempty"`

	// StartTime: The start of the time period over which this metric
	// value's measurement
	// applies. The time period has different semantics for different
	// metric
	// types (cumulative, delta, and gauge). See the metric
	// definition
	// documentation in the service configuration for details.
	StartTime string `json:"startTime,omitempty"`

	// StringValue: A text string value.
	StringValue string `json:"stringValue,omitempty"`

	// ForceSendFields is a list of field names (e.g. "BoolValue") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type MetricValueSet struct {
	// MetricName: The metric name defined in the service configuration.
	MetricName string `json:"metricName,omitempty"`

	// MetricValues: The values in this metric.
	MetricValues []*MetricValue `json:"metricValues,omitempty"`

	// ForceSendFields is a list of field names (e.g. "MetricName") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type Operation struct {
	// ConsumerId: Identity of the consumer who is using the service.
	// This field should be filled in for the operations initiated by
	// a
	// consumer, but not for service-initiated operations that are
	// not related to a specific consumer.
	//
	// This can be in one of the following formats:
	//   project:<project_id>,
	//   project_number:<project_number>,
	//   api_key:<api_key>.
	ConsumerId string `json:"consumerId,omitempty"`

	// EndTime: End time of the operation.
	// Required when the operation is used in ServiceController.Report,
	// but optional when the operation is used in ServiceController.Check.
	EndTime string `json:"endTime,omitempty"`

	// Importance: The importance of the data contained in the operation.
	//
	// Possible values:
	//   "LOW" - The operation doesn't contain significant monetary value or
	// audit
	// trail. The API implementation may cache and aggregate the data.
	// There is no deduplication based on `operation_id`. The data
	// may be lost when rare and unexpected system failures occur.
	//   "HIGH" - The operation contains significant monetary value or audit
	// trail.
	// The API implementation doesn't cache and aggregate the
	// data.
	// Deduplication based on `operation_id` is performed for
	// monetary
	// values. If the method returns successfully, it's guaranteed that
	// the data are persisted in durable storage.
	Importance string `json:"importance,omitempty"`

	// Labels: Labels describing the operation. Only the following labels
	// are allowed:
	//
	// - Labels describing monitored resources as defined in
	//   the service configuration.
	// - Default labels of metric values. When specified, labels defined in
	// the
	//   metric value override these default.
	// - The following labels defined by Google Cloud Platform:
	//     - `cloud.googleapis.com/location` describing the location where
	// the
	//        operation happened,
	//     - `servicecontrol.googleapis.com/user_agent` describing the user
	// agent
	//        of the API request,
	//     - `servicecontrol.googleapis.com/service_agent` describing the
	// service
	//        used to handle the API request (e.g. ESP),
	//     - `servicecontrol.googleapis.com/platform` describing the
	// platform
	//        where the API is served (e.g. GAE, GCE, GKE).
	Labels map[string]string `json:"labels,omitempty"`

	// LogEntries: Represents information to be logged.
	LogEntries []*LogEntry `json:"logEntries,omitempty"`

	// MetricValueSets: Represents information about this operation. Each
	// MetricValueSet
	// corresponds to a metric defined in the service configuration.
	// The data type used in the MetricValueSet must agree with
	// the data type specified in the metric definition.
	//
	// Within a single operation, it is not allowed to have more than
	// one
	// MetricValue instances that have the same metric names and
	// identical
	// label value combinations. If a request has such duplicated
	// MetricValue
	// instances, the entire request is rejected with
	// an invalid argument error.
	MetricValueSets []*MetricValueSet `json:"metricValueSets,omitempty"`

	// OperationId: Identity of the operation. This must be unique within
	// the scope of the
	// service that generated the operation. If the service calls
	// Check() and Report() on the same operation, the two calls should
	// carry
	// the same id.
	//
	// UUID version 4 is recommended, though not required.
	// In scenarios where an operation is computed from existing
	// information
	// and an idempotent id is desirable for deduplication purpose, UUID
	// version 5
	// is recommended. See RFC 4122 for details.
	OperationId string `json:"operationId,omitempty"`

	// OperationName: Fully qualified name of the operation. Reserved for
	// future use.
	OperationName string `json:"operationName,omitempty"`

	// StartTime: Required. Start time of the operation.
	StartTime string `json:"startTime,omitempty"`

	// ForceSendFields is a list of field names (e.g. "ConsumerId") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type ReportError struct {
	// OperationId: The Operation.operation_id value from the request.
	OperationId string `json:"operationId,omitempty"`

	// Status: Details of the error when processing the `Operation`.
	Status *Status `json:"status,omitempty"`

	// ForceSendFields is a list of field names (e.g. "OperationId") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type ReportRequest struct {
	// Operations: Operations to be reported.
	//
	// Typically the service should report one operation per
	// request.
	// Putting multiple operations into a single request is allowed, but
	// should
	// be used only when multiple operations are natually available at the
	// time
	// of the report.
	//
	// If multiple operations are in a single request, the total request
	// size
	// should be no larger than 1MB. See ReportResponse.report_errors
	// for
	// partial failure behavior.
	Operations []*Operation `json:"operations,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Operations") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type ReportResponse struct {
	// ReportErrors: Partial failures, one for each `Operation` in the
	// request that failed
	// processing. There are three possible combinations of the RPC
	// status:
	//
	// 1. The combination of a successful RPC status and an empty
	// `report_errors`
	//    list indicates a complete success where all `Operations` in the
	//    request are processed successfully.
	// 2. The combination of a successful RPC status and a non-empty
	//    `report_errors` list indicates a partial success where some
	//    `Operations` in the request succeeded. Each
	//    `Operation` that failed processing has a corresponding item
	//    in this list.
	// 3. A failed RPC status indicates a complete failure where none of
	// the
	//    `Operations` in the request succeeded.
	ReportErrors []*ReportError `json:"reportErrors,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "ReportErrors") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type Service struct {
	BasePath  string // API endpoint base URL
	UserAgent string // optional additional User-Agent fragment

	Services *ServicesService
	// contains filtered or unexported fields
}

type ServicesCheckCall struct {
	// contains filtered or unexported fields
}

type ServicesReportCall struct {
	// contains filtered or unexported fields
}

type ServicesService struct {
	// contains filtered or unexported fields
}

type Status struct {
	// Code: The status code, which should be an enum value of
	// google.rpc.Code.
	Code int64 `json:"code,omitempty"`

	// Details: A list of messages that carry the error details.  There will
	// be a
	// common set of message types for APIs to use.
	Details []StatusDetails `json:"details,omitempty"`

	// Message: A developer-facing error message, which should be in
	// English. Any
	// user-facing error message should be localized and sent in
	// the
	// google.rpc.Status.details field, or localized by the client.
	Message string `json:"message,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Code") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`
}

type StatusDetails interface{}