monitoring

type Aggregation struct {
	// AlignmentPeriod: The alignment period for per-time series alignment.
	// If present, alignmentPeriod must be at least 60 seconds. After
	// per-time series alignment, each time series will contain data points
	// only on the period boundaries. If perSeriesAligner is not specified
	// or equals ALIGN_NONE, then this field is ignored. If perSeriesAligner
	// is specified and does not equal ALIGN_NONE, then this field must be
	// defined; otherwise an error is returned.
	AlignmentPeriod string `json:"alignmentPeriod,omitempty"`

	// CrossSeriesReducer: The approach to be used to combine time series.
	// Not all reducer functions may be applied to all time series,
	// depending on the metric type and the value type of the original time
	// series. Reduction may change the metric type of value type of the
	// time series.Time series data must be aligned in order to perform
	// cross-time series reduction. If crossSeriesReducer is specified, then
	// perSeriesAligner must be specified and not equal ALIGN_NONE and
	// alignmentPeriod must be specified; otherwise, an error is returned.
	//
	// Possible values:
	//   "REDUCE_NONE" - No cross-time series reduction. The output of the
	// aligner is returned.
	//   "REDUCE_MEAN" - Reduce by computing the mean across time series for
	// each alignment period. This reducer is valid for delta and gauge
	// metrics with numeric or distribution values. The value type of the
	// output is DOUBLE.
	//   "REDUCE_MIN" - Reduce by computing the minimum across time series
	// for each alignment period. This reducer is valid for delta and gauge
	// metrics with numeric values. The value type of the output is the same
	// as the value type of the input.
	//   "REDUCE_MAX" - Reduce by computing the maximum across time series
	// for each alignment period. This reducer is valid for delta and gauge
	// metrics with numeric values. The value type of the output is the same
	// as the value type of the input.
	//   "REDUCE_SUM" - Reduce by computing the sum across time series for
	// each alignment period. This reducer is valid for delta and gauge
	// metrics with numeric and distribution values. The value type of the
	// output is the same as the value type of the input.
	//   "REDUCE_STDDEV" - Reduce by computing the standard deviation across
	// time series for each alignment period. This reducer is valid for
	// delta and gauge metrics with numeric or distribution values. The
	// value type of the output is DOUBLE.
	//   "REDUCE_COUNT" - Reduce by computing the count of data points
	// across time series for each alignment period. This reducer is valid
	// for delta and gauge metrics of numeric, Boolean, distribution, and
	// string value type. The value type of the output is INT64.
	//   "REDUCE_COUNT_TRUE" - Reduce by computing the count of True-valued
	// data points across time series for each alignment period. This
	// reducer is valid for delta and gauge metrics of Boolean value type.
	// The value type of the output is INT64.
	//   "REDUCE_COUNT_FALSE" - Reduce by computing the count of
	// False-valued data points across time series for each alignment
	// period. This reducer is valid for delta and gauge metrics of Boolean
	// value type. The value type of the output is INT64.
	//   "REDUCE_FRACTION_TRUE" - Reduce by computing the fraction of
	// True-valued data points across time series for each alignment period.
	// This reducer is valid for delta and gauge metrics of Boolean value
	// type. The output value is in the range 0, 1 and has value type
	// DOUBLE.
	//   "REDUCE_PERCENTILE_99" - Reduce by computing 99th percentile of
	// data points across time series for each alignment period. This
	// reducer is valid for gauge and delta metrics of numeric and
	// distribution type. The value of the output is DOUBLE
	//   "REDUCE_PERCENTILE_95" - Reduce by computing 95th percentile of
	// data points across time series for each alignment period. This
	// reducer is valid for gauge and delta metrics of numeric and
	// distribution type. The value of the output is DOUBLE
	//   "REDUCE_PERCENTILE_50" - Reduce by computing 50th percentile of
	// data points across time series for each alignment period. This
	// reducer is valid for gauge and delta metrics of numeric and
	// distribution type. The value of the output is DOUBLE
	//   "REDUCE_PERCENTILE_05" - Reduce by computing 5th percentile of data
	// points across time series for each alignment period. This reducer is
	// valid for gauge and delta metrics of numeric and distribution type.
	// The value of the output is DOUBLE
	CrossSeriesReducer string `json:"crossSeriesReducer,omitempty"`

	// GroupByFields: The set of fields to preserve when crossSeriesReducer
	// is specified. The groupByFields determine how the time series are
	// partitioned into subsets prior to applying the aggregation function.
	// Each subset contains time series that have the same value for each of
	// the grouping fields. Each individual time series is a member of
	// exactly one subset. The crossSeriesReducer is applied to each subset
	// of time series. It is not possible to reduce across different
	// resource types, so this field implicitly contains resource.type.
	// Fields not specified in groupByFields are aggregated away. If
	// groupByFields is not specified and all the time series have the same
	// resource type, then the time series are aggregated into a single
	// output time series. If crossSeriesReducer is not defined, this field
	// is ignored.
	GroupByFields []string `json:"groupByFields,omitempty"`

	// PerSeriesAligner: The approach to be used to align individual time
	// series. Not all alignment functions may be applied to all time
	// series, depending on the metric type and value type of the original
	// time series. Alignment may change the metric type or the value type
	// of the time series.Time series data must be aligned in order to
	// perform cross-time series reduction. If crossSeriesReducer is
	// specified, then perSeriesAligner must be specified and not equal
	// ALIGN_NONE and alignmentPeriod must be specified; otherwise, an error
	// is returned.
	//
	// Possible values:
	//   "ALIGN_NONE" - No alignment. Raw data is returned. Not valid if
	// cross-time series reduction is requested. The value type of the
	// result is the same as the value type of the input.
	//   "ALIGN_DELTA" - Align and convert to delta metric type. This
	// alignment is valid for cumulative metrics and delta metrics. Aligning
	// an existing delta metric to a delta metric requires that the
	// alignment period be increased. The value type of the result is the
	// same as the value type of the input.One can think of this aligner as
	// a rate but without time units; that is, the output is conceptually
	// (second_point - first_point).
	//   "ALIGN_RATE" - Align and convert to a rate. This alignment is valid
	// for cumulative metrics and delta metrics with numeric values. The
	// output is a gauge metric with value type DOUBLE.One can think of this
	// aligner as conceptually providing the slope of the line that passes
	// through the value at the start and end of the window. In other words,
	// this is conceptually ((y1 - y0)/(t1 - t0)), and the output unit is
	// one that has a "/time" dimension.If, by rate, you are looking for
	// percentage change, see the ALIGN_PERCENT_CHANGE aligner option.
	//   "ALIGN_INTERPOLATE" - Align by interpolating between adjacent
	// points around the period boundary. This alignment is valid for gauge
	// metrics with numeric values. The value type of the result is the same
	// as the value type of the input.
	//   "ALIGN_NEXT_OLDER" - Align by shifting the oldest data point before
	// the period boundary to the boundary. This alignment is valid for
	// gauge metrics. The value type of the result is the same as the value
	// type of the input.
	//   "ALIGN_MIN" - Align time series via aggregation. The resulting data
	// point in the alignment period is the minimum of all data points in
	// the period. This alignment is valid for gauge and delta metrics with
	// numeric values. The value type of the result is the same as the value
	// type of the input.
	//   "ALIGN_MAX" - Align time series via aggregation. The resulting data
	// point in the alignment period is the maximum of all data points in
	// the period. This alignment is valid for gauge and delta metrics with
	// numeric values. The value type of the result is the same as the value
	// type of the input.
	//   "ALIGN_MEAN" - Align time series via aggregation. The resulting
	// data point in the alignment period is the average or arithmetic mean
	// of all data points in the period. This alignment is valid for gauge
	// and delta metrics with numeric values. The value type of the output
	// is DOUBLE.
	//   "ALIGN_COUNT" - Align time series via aggregation. The resulting
	// data point in the alignment period is the count of all data points in
	// the period. This alignment is valid for gauge and delta metrics with
	// numeric or Boolean values. The value type of the output is INT64.
	//   "ALIGN_SUM" - Align time series via aggregation. The resulting data
	// point in the alignment period is the sum of all data points in the
	// period. This alignment is valid for gauge and delta metrics with
	// numeric and distribution values. The value type of the output is the
	// same as the value type of the input.
	//   "ALIGN_STDDEV" - Align time series via aggregation. The resulting
	// data point in the alignment period is the standard deviation of all
	// data points in the period. This alignment is valid for gauge and
	// delta metrics with numeric values. The value type of the output is
	// DOUBLE.
	//   "ALIGN_COUNT_TRUE" - Align time series via aggregation. The
	// resulting data point in the alignment period is the count of
	// True-valued data points in the period. This alignment is valid for
	// gauge metrics with Boolean values. The value type of the output is
	// INT64.
	//   "ALIGN_COUNT_FALSE" - Align time series via aggregation. The
	// resulting data point in the alignment period is the count of
	// False-valued data points in the period. This alignment is valid for
	// gauge metrics with Boolean values. The value type of the output is
	// INT64.
	//   "ALIGN_FRACTION_TRUE" - Align time series via aggregation. The
	// resulting data point in the alignment period is the fraction of
	// True-valued data points in the period. This alignment is valid for
	// gauge metrics with Boolean values. The output value is in the range
	// 0, 1 and has value type DOUBLE.
	//   "ALIGN_PERCENTILE_99" - Align time series via aggregation. The
	// resulting data point in the alignment period is the 99th percentile
	// of all data points in the period. This alignment is valid for gauge
	// and delta metrics with distribution values. The output is a gauge
	// metric with value type DOUBLE.
	//   "ALIGN_PERCENTILE_95" - Align time series via aggregation. The
	// resulting data point in the alignment period is the 95th percentile
	// of all data points in the period. This alignment is valid for gauge
	// and delta metrics with distribution values. The output is a gauge
	// metric with value type DOUBLE.
	//   "ALIGN_PERCENTILE_50" - Align time series via aggregation. The
	// resulting data point in the alignment period is the 50th percentile
	// of all data points in the period. This alignment is valid for gauge
	// and delta metrics with distribution values. The output is a gauge
	// metric with value type DOUBLE.
	//   "ALIGN_PERCENTILE_05" - Align time series via aggregation. The
	// resulting data point in the alignment period is the 5th percentile of
	// all data points in the period. This alignment is valid for gauge and
	// delta metrics with distribution values. The output is a gauge metric
	// with value type DOUBLE.
	//   "ALIGN_PERCENT_CHANGE" - Align and convert to a percentage change.
	// This alignment is valid for gauge and delta metrics with numeric
	// values. This alignment conceptually computes the equivalent of
	// "((current - previous)/previous)*100" where previous value is
	// determined based on the alignmentPeriod. In the event that previous
	// is 0 the calculated value is infinity with the exception that if both
	// (current - previous) and previous are 0 the calculated value is 0. A
	// 10 minute moving mean is computed at each point of the time window
	// prior to the above calculation to smooth the metric and prevent false
	// positives from very short lived spikes. Only applicable for data that
	// is >= 0. Any values < 0 are treated as no data. While delta metrics
	// are accepted by this alignment special care should be taken that the
	// values for the metric will always be positive. The output is a gauge
	// metric with value type DOUBLE.
	PerSeriesAligner string `json:"perSeriesAligner,omitempty"`

	// ForceSendFields is a list of field names (e.g. "AlignmentPeriod") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "AlignmentPeriod") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type Axis struct {
	// Label: The label of the axis.
	Label string `json:"label,omitempty"`

	// Scale: The axis scale. By default, a linear scale is used.
	//
	// Possible values:
	//   "SCALE_UNSPECIFIED" - Scale is unspecified. The view will default
	// to LINEAR.
	//   "LINEAR" - Linear scale.
	//   "LOG10" - Logarithmic scale (base 10).
	Scale string `json:"scale,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Label") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Label") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ChartOptions struct {
	// Mode: The chart mode.
	//
	// Possible values:
	//   "MODE_UNSPECIFIED" - Mode is unspecified. The view will default to
	// COLOR.
	//   "COLOR" - The chart distinguishes data series using different
	// color. Line colors may get reused when there are many lines in the
	// chart.
	//   "X_RAY" - The chart uses the Stackdriver x-ray mode, in which each
	// data set is plotted using the same semi-transparent color.
	//   "STATS" - The chart displays statistics such as average, median,
	// 95th percentile, and more.
	Mode string `json:"mode,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Mode") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Mode") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Column struct {
	// Weight: The relative weight of this column. The column weight is used
	// to adjust the width of columns on the screen (relative to peers).
	// Greater the weight, greater the width of the column on the screen. If
	// omitted, a value of 1 is used while rendering.
	Weight int64 `json:"weight,omitempty,string"`

	// Widgets: The display widgets arranged vertically in this column.
	Widgets []*Widget `json:"widgets,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Weight") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Weight") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ColumnLayout struct {
	// Columns: The columns of content to display.
	Columns []*Column `json:"columns,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Columns") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Columns") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Dashboard struct {
	// ColumnLayout: The content is divided into equally spaced columns and
	// the widgets are arranged vertically.
	ColumnLayout *ColumnLayout `json:"columnLayout,omitempty"`

	// DisplayName: The mutable, human-readable name.
	DisplayName string `json:"displayName,omitempty"`

	// Etag: etag is used for optimistic concurrency control as a way to
	// help prevent simultaneous updates of a policy from overwriting each
	// other. An etag is returned in the response to GetDashboard, and users
	// are expected to put that etag in the request to UpdateDashboard to
	// ensure that their change will be applied to the same version of the
	// Dashboard configuration. The field should not be passed during
	// dashboard creation.
	Etag string `json:"etag,omitempty"`

	// GridLayout: Content is arranged with a basic layout that re-flows a
	// simple list of informational elements like widgets or tiles.
	GridLayout *GridLayout `json:"gridLayout,omitempty"`

	// Name: The resource name of the dashboard.
	Name string `json:"name,omitempty"`

	// RowLayout: The content is divided into equally spaced rows and the
	// widgets are arranged horizontally.
	RowLayout *RowLayout `json:"rowLayout,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "ColumnLayout") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "ColumnLayout") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type DataSet struct {
	// LegendTemplate: A template string for naming TimeSeries in the
	// resulting data set. This should be a string with interpolations of
	// the form ${label_name}, which will resolve to the label's value.
	LegendTemplate string `json:"legendTemplate,omitempty"`

	// MinAlignmentPeriod: Optional. The lower bound on data point frequency
	// for this data set, implemented by specifying the minimum alignment
	// period to use in a time series query For example, if the data is
	// published once every 10 minutes, the min_alignment_period should be
	// at least 10 minutes. It would not make sense to fetch and align data
	// at one minute intervals.
	MinAlignmentPeriod string `json:"minAlignmentPeriod,omitempty"`

	// PlotType: How this data should be plotted on the chart.
	//
	// Possible values:
	//   "PLOT_TYPE_UNSPECIFIED" - Plot type is unspecified. The view will
	// default to LINE.
	//   "LINE" - The data is plotted as a set of lines (one line per
	// series).
	//   "STACKED_AREA" - The data is plotted as a set of filled areas (one
	// area per series), with the areas stacked vertically (the base of each
	// area is the top of its predecessor, and the base of the first area is
	// the X axis). Since the areas do not overlap, each is filled with a
	// different opaque color.
	//   "STACKED_BAR" - The data is plotted as a set of rectangular boxes
	// (one box per series), with the boxes stacked vertically (the base of
	// each box is the top of its predecessor, and the base of the first box
	// is the X axis). Since the boxes do not overlap, each is filled with a
	// different opaque color.
	//   "HEATMAP" - The data is plotted as a heatmap. The series being
	// plotted must have a DISTRIBUTION value type. The value of each bucket
	// in the distribution is displayed as a color. This type is not
	// currently available in the Stackdriver Monitoring application.
	PlotType string `json:"plotType,omitempty"`

	// TimeSeriesQuery: Fields for querying time series data from the
	// Stackdriver metrics API.
	TimeSeriesQuery *TimeSeriesQuery `json:"timeSeriesQuery,omitempty"`

	// ForceSendFields is a list of field names (e.g. "LegendTemplate") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "LegendTemplate") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type DroppedLabels struct {
	// Label: Map from label to its value, for all labels dropped in any
	// aggregation.
	Label map[string]string `json:"label,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Label") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Label") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Empty struct {
	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`
}

type Field struct {
	// Cardinality: The field cardinality.
	//
	// Possible values:
	//   "CARDINALITY_UNKNOWN" - For fields with unknown cardinality.
	//   "CARDINALITY_OPTIONAL" - For optional fields.
	//   "CARDINALITY_REQUIRED" - For required fields. Proto2 syntax only.
	//   "CARDINALITY_REPEATED" - For repeated fields.
	Cardinality string `json:"cardinality,omitempty"`

	// DefaultValue: The string value of the default value of this field.
	// Proto2 syntax only.
	DefaultValue string `json:"defaultValue,omitempty"`

	// JsonName: The field JSON name.
	JsonName string `json:"jsonName,omitempty"`

	// Kind: The field type.
	//
	// Possible values:
	//   "TYPE_UNKNOWN" - Field type unknown.
	//   "TYPE_DOUBLE" - Field type double.
	//   "TYPE_FLOAT" - Field type float.
	//   "TYPE_INT64" - Field type int64.
	//   "TYPE_UINT64" - Field type uint64.
	//   "TYPE_INT32" - Field type int32.
	//   "TYPE_FIXED64" - Field type fixed64.
	//   "TYPE_FIXED32" - Field type fixed32.
	//   "TYPE_BOOL" - Field type bool.
	//   "TYPE_STRING" - Field type string.
	//   "TYPE_GROUP" - Field type group. Proto2 syntax only, and
	// deprecated.
	//   "TYPE_MESSAGE" - Field type message.
	//   "TYPE_BYTES" - Field type bytes.
	//   "TYPE_UINT32" - Field type uint32.
	//   "TYPE_ENUM" - Field type enum.
	//   "TYPE_SFIXED32" - Field type sfixed32.
	//   "TYPE_SFIXED64" - Field type sfixed64.
	//   "TYPE_SINT32" - Field type sint32.
	//   "TYPE_SINT64" - Field type sint64.
	Kind string `json:"kind,omitempty"`

	// Name: The field name.
	Name string `json:"name,omitempty"`

	// Number: The field number.
	Number int64 `json:"number,omitempty"`

	// OneofIndex: The index of the field type in Type.oneofs, for message
	// or enumeration types. The first type has index 1; zero means the type
	// is not in the list.
	OneofIndex int64 `json:"oneofIndex,omitempty"`

	// Options: The protocol buffer options.
	Options []*Option `json:"options,omitempty"`

	// Packed: Whether to use alternative packed wire representation.
	Packed bool `json:"packed,omitempty"`

	// TypeUrl: The field type URL, without the scheme, for message or
	// enumeration types. Example:
	// "type.googleapis.com/google.protobuf.Timestamp".
	TypeUrl string `json:"typeUrl,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Cardinality") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Cardinality") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type GaugeView struct {
	// LowerBound: The lower bound for this gauge chart. The value of the
	// chart should always be greater than or equal to this.
	LowerBound float64 `json:"lowerBound,omitempty"`

	// UpperBound: The upper bound for this gauge chart. The value of the
	// chart should always be less than or equal to this.
	UpperBound float64 `json:"upperBound,omitempty"`

	// ForceSendFields is a list of field names (e.g. "LowerBound") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "LowerBound") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type GridLayout struct {
	// Columns: The number of columns into which the view's width is
	// divided. If omitted or set to zero, a system default will be used
	// while rendering.
	Columns int64 `json:"columns,omitempty,string"`

	// Widgets: The informational elements that are arranged into the
	// columns row-first.
	Widgets []*Widget `json:"widgets,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Columns") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Columns") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ListDashboardsResponse struct {
	// Dashboards: The list of requested dashboards.
	Dashboards []*Dashboard `json:"dashboards,omitempty"`

	// NextPageToken: If there are more results than have been returned,
	// then this field is set to a non-empty value. To see the additional
	// results, use that value as pageToken in the next call to this method.
	NextPageToken string `json:"nextPageToken,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "Dashboards") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Dashboards") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Option struct {
	// Name: The option's name. For protobuf built-in options (options
	// defined in descriptor.proto), this is the short name. For example,
	// "map_entry". For custom options, it should be the fully-qualified
	// name. For example, "google.api.http".
	Name string `json:"name,omitempty"`

	// Value: The option's value packed in an Any message. If the value is a
	// primitive, the corresponding wrapper type defined in
	// google/protobuf/wrappers.proto should be used. If the value is an
	// enum, it should be stored as an int32 value using the
	// google.protobuf.Int32Value type.
	Value googleapi.RawMessage `json:"value,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Name") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Name") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type PickTimeSeriesFilter struct {
	// Direction: How to use the ranking to select time series that pass
	// through the filter.
	//
	// Possible values:
	//   "DIRECTION_UNSPECIFIED" - Not allowed in well-formed requests.
	//   "TOP" - Pass the highest ranking inputs.
	//   "BOTTOM" - Pass the lowest ranking inputs.
	Direction string `json:"direction,omitempty"`

	// NumTimeSeries: How many time series to return.
	NumTimeSeries int64 `json:"numTimeSeries,omitempty"`

	// RankingMethod: rankingMethod is applied to each time series
	// independently to produce the value which will be used to compare the
	// time series to other time series.
	//
	// Possible values:
	//   "METHOD_UNSPECIFIED" - Not allowed in well-formed requests.
	//   "METHOD_MEAN" - Select the mean of all values.
	//   "METHOD_MAX" - Select the maximum value.
	//   "METHOD_MIN" - Select the minimum value.
	//   "METHOD_SUM" - Compute the sum of all values.
	//   "METHOD_LATEST" - Select the most recent value.
	RankingMethod string `json:"rankingMethod,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Direction") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Direction") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ProjectsDashboardsCreateCall struct {
	// contains filtered or unexported fields
}

type ProjectsDashboardsDeleteCall struct {
	// contains filtered or unexported fields
}

type ProjectsDashboardsGetCall struct {
	// contains filtered or unexported fields
}

type ProjectsDashboardsListCall struct {
	// contains filtered or unexported fields
}

type ProjectsDashboardsPatchCall struct {
	// contains filtered or unexported fields
}

type ProjectsDashboardsService struct {
	// contains filtered or unexported fields
}

type ProjectsService struct {
	Dashboards *ProjectsDashboardsService
	// contains filtered or unexported fields
}

type RatioPart struct {
	// Aggregation: By default, the raw time series data is returned. Use
	// this field to combine multiple time series for different views of the
	// data.
	Aggregation *Aggregation `json:"aggregation,omitempty"`

	// Filter: Required. The monitoring filter that identifies the metric
	// types, resources, and projects to query.
	Filter string `json:"filter,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Aggregation") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Aggregation") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Row struct {
	// Weight: The relative weight of this row. The row weight is used to
	// adjust the height of rows on the screen (relative to peers). Greater
	// the weight, greater the height of the row on the screen. If omitted,
	// a value of 1 is used while rendering.
	Weight int64 `json:"weight,omitempty,string"`

	// Widgets: The display widgets arranged horizontally in this row.
	Widgets []*Widget `json:"widgets,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Weight") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Weight") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type RowLayout struct {
	// Rows: The rows of content to display.
	Rows []*Row `json:"rows,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Rows") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Rows") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Scorecard struct {
	// GaugeView: Will cause the scorecard to show a gauge chart.
	GaugeView *GaugeView `json:"gaugeView,omitempty"`

	// SparkChartView: Will cause the scorecard to show a spark chart.
	SparkChartView *SparkChartView `json:"sparkChartView,omitempty"`

	// Thresholds: The thresholds used to determine the state of the
	// scorecard given the time series' current value. For an actual value
	// x, the scorecard is in a danger state if x is less than or equal to a
	// danger threshold that triggers below, or greater than or equal to a
	// danger threshold that triggers above. Similarly, if x is above/below
	// a warning threshold that triggers above/below, then the scorecard is
	// in a warning state - unless x also puts it in a danger state. (Danger
	// trumps warning.)As an example, consider a scorecard with the
	// following four thresholds: {  value: 90,  category: 'DANGER',
	// trigger: 'ABOVE', }, {  value: 70,  category: 'WARNING',  trigger:
	// 'ABOVE', }, {  value: 10,  category: 'DANGER',  trigger: 'BELOW', },
	// {  value: 20,  category: 'WARNING',  trigger: 'BELOW', }Then: values
	// less than or equal to 10 would put the scorecard in a DANGER state,
	// values greater than 10 but less than or equal to 20 a WARNING state,
	// values strictly between 20 and 70 an OK state, values greater than or
	// equal to 70 but less than 90 a WARNING state, and values greater than
	// or equal to 90 a DANGER state.
	Thresholds []*Threshold `json:"thresholds,omitempty"`

	// TimeSeriesQuery: Fields for querying time series data from the
	// Stackdriver metrics API.
	TimeSeriesQuery *TimeSeriesQuery `json:"timeSeriesQuery,omitempty"`

	// ForceSendFields is a list of field names (e.g. "GaugeView") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "GaugeView") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Service struct {
	BasePath  string // API endpoint base URL
	UserAgent string // optional additional User-Agent fragment

	Projects *ProjectsService
	// contains filtered or unexported fields
}

type SourceContext struct {
	// FileName: The path-qualified name of the .proto file that contained
	// the associated protobuf element. For example:
	// "google/protobuf/source_context.proto".
	FileName string `json:"fileName,omitempty"`

	// ForceSendFields is a list of field names (e.g. "FileName") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "FileName") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type SpanContext struct {
	// SpanName: The resource name of the span in the following
	// format:
	// projects/[PROJECT_ID]/traces/[TRACE_ID]/spans/[SPAN_ID]
	// TRACE_
	// ID is a unique identifier for a trace within a project; it is a
	// 32-character hexadecimal encoding of a 16-byte array.SPAN_ID is a
	// unique identifier for a span within a trace; it is a 16-character
	// hexadecimal encoding of an 8-byte array.
	SpanName string `json:"spanName,omitempty"`

	// ForceSendFields is a list of field names (e.g. "SpanName") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "SpanName") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type SparkChartView struct {
	// MinAlignmentPeriod: The lower bound on data point frequency in the
	// chart implemented by specifying the minimum alignment period to use
	// in a time series query. For example, if the data is published once
	// every 10 minutes it would not make sense to fetch and align data at
	// one minute intervals. This field is optional and exists only as a
	// hint.
	MinAlignmentPeriod string `json:"minAlignmentPeriod,omitempty"`

	// SparkChartType: The type of sparkchart to show in this chartView.
	//
	// Possible values:
	//   "SPARK_CHART_TYPE_UNSPECIFIED" - Not allowed in well-formed
	// requests.
	//   "SPARK_LINE" - The sparkline will be rendered as a small line
	// chart.
	//   "SPARK_BAR" - The sparkbar will be rendered as a small bar chart.
	SparkChartType string `json:"sparkChartType,omitempty"`

	// ForceSendFields is a list of field names (e.g. "MinAlignmentPeriod")
	// to unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "MinAlignmentPeriod") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type StatisticalTimeSeriesFilter struct {
	// NumTimeSeries: How many time series to output.
	NumTimeSeries int64 `json:"numTimeSeries,omitempty"`

	// RankingMethod: rankingMethod is applied to a set of time series, and
	// then the produced value for each individual time series is used to
	// compare a given time series to others. These are methods that cannot
	// be applied stream-by-stream, but rather require the full context of a
	// request to evaluate time series.
	//
	// Possible values:
	//   "METHOD_UNSPECIFIED" - Not allowed in well-formed requests.
	//   "METHOD_CLUSTER_OUTLIER" - Compute the outlier score of each
	// stream.
	RankingMethod string `json:"rankingMethod,omitempty"`

	// ForceSendFields is a list of field names (e.g. "NumTimeSeries") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "NumTimeSeries") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Text struct {
	// Content: The text content to be displayed.
	Content string `json:"content,omitempty"`

	// Format: How the text content is formatted.
	//
	// Possible values:
	//   "FORMAT_UNSPECIFIED" - Format is unspecified. Defaults to MARKDOWN.
	//   "MARKDOWN" - The text contains Markdown formatting.
	//   "RAW" - The text contains no special formatting.
	Format string `json:"format,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Content") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Content") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Threshold struct {
	// Color: The state color for this threshold. Color is not allowed in a
	// XyChart.
	//
	// Possible values:
	//   "COLOR_UNSPECIFIED" - Color is unspecified. Not allowed in
	// well-formed requests.
	//   "YELLOW" - Crossing the threshold is "concerning" behavior.
	//   "RED" - Crossing the threshold is "emergency" behavior.
	Color string `json:"color,omitempty"`

	// Direction: The direction for the current threshold. Direction is not
	// allowed in a XyChart.
	//
	// Possible values:
	//   "DIRECTION_UNSPECIFIED" - Not allowed in well-formed requests.
	//   "ABOVE" - The threshold will be considered crossed if the actual
	// value is above the threshold value.
	//   "BELOW" - The threshold will be considered crossed if the actual
	// value is below the threshold value.
	Direction string `json:"direction,omitempty"`

	// Label: A label for the threshold.
	Label string `json:"label,omitempty"`

	// Value: The value of the threshold. The value should be defined in the
	// native scale of the metric.
	Value float64 `json:"value,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Color") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Color") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type TimeSeriesFilter struct {
	// Aggregation: By default, the raw time series data is returned. Use
	// this field to combine multiple time series for different views of the
	// data.
	Aggregation *Aggregation `json:"aggregation,omitempty"`

	// Filter: Required. The monitoring filter that identifies the metric
	// types, resources, and projects to query.
	Filter string `json:"filter,omitempty"`

	// PickTimeSeriesFilter: Ranking based time series filter.
	PickTimeSeriesFilter *PickTimeSeriesFilter `json:"pickTimeSeriesFilter,omitempty"`

	// StatisticalTimeSeriesFilter: Statistics based time series filter.
	StatisticalTimeSeriesFilter *StatisticalTimeSeriesFilter `json:"statisticalTimeSeriesFilter,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Aggregation") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Aggregation") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type TimeSeriesFilterRatio struct {
	// Denominator: The denominator of the ratio.
	Denominator *RatioPart `json:"denominator,omitempty"`

	// Numerator: The numerator of the ratio.
	Numerator *RatioPart `json:"numerator,omitempty"`

	// PickTimeSeriesFilter: Ranking based time series filter.
	PickTimeSeriesFilter *PickTimeSeriesFilter `json:"pickTimeSeriesFilter,omitempty"`

	// SecondaryAggregation: Apply a second aggregation after the ratio is
	// computed.
	SecondaryAggregation *Aggregation `json:"secondaryAggregation,omitempty"`

	// StatisticalTimeSeriesFilter: Statistics based time series filter.
	StatisticalTimeSeriesFilter *StatisticalTimeSeriesFilter `json:"statisticalTimeSeriesFilter,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Denominator") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Denominator") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type TimeSeriesQuery struct {
	// TimeSeriesFilter: Filter parameters to fetch time series.
	TimeSeriesFilter *TimeSeriesFilter `json:"timeSeriesFilter,omitempty"`

	// TimeSeriesFilterRatio: Parameters to fetch a ratio between two time
	// series filters.
	TimeSeriesFilterRatio *TimeSeriesFilterRatio `json:"timeSeriesFilterRatio,omitempty"`

	// UnitOverride: The unit of data contained in fetched time series. If
	// non-empty, this unit will override any unit that accompanies fetched
	// data. The format is the same as the unit field in MetricDescriptor.
	UnitOverride string `json:"unitOverride,omitempty"`

	// ForceSendFields is a list of field names (e.g. "TimeSeriesFilter") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "TimeSeriesFilter") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type Type struct {
	// Fields: The list of fields.
	Fields []*Field `json:"fields,omitempty"`

	// Name: The fully qualified message name.
	Name string `json:"name,omitempty"`

	// Oneofs: The list of types appearing in oneof definitions in this
	// type.
	Oneofs []string `json:"oneofs,omitempty"`

	// Options: The protocol buffer options.
	Options []*Option `json:"options,omitempty"`

	// SourceContext: The source context.
	SourceContext *SourceContext `json:"sourceContext,omitempty"`

	// Syntax: The source syntax.
	//
	// Possible values:
	//   "SYNTAX_PROTO2" - Syntax proto2.
	//   "SYNTAX_PROTO3" - Syntax proto3.
	Syntax string `json:"syntax,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Fields") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Fields") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Widget struct {
	// Blank: A blank space.
	Blank *Empty `json:"blank,omitempty"`

	// Scorecard: A scorecard summarizing time series data.
	Scorecard *Scorecard `json:"scorecard,omitempty"`

	// Text: A raw string or markdown displaying textual content.
	Text *Text `json:"text,omitempty"`

	// Title: Optional. The title of the widget.
	Title string `json:"title,omitempty"`

	// XyChart: A chart of time series data.
	XyChart *XyChart `json:"xyChart,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Blank") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Blank") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type XyChart struct {
	// ChartOptions: Display options for the chart.
	ChartOptions *ChartOptions `json:"chartOptions,omitempty"`

	// DataSets: The data displayed in this chart.
	DataSets []*DataSet `json:"dataSets,omitempty"`

	// Thresholds: Threshold lines drawn horizontally across the chart.
	Thresholds []*Threshold `json:"thresholds,omitempty"`

	// TimeshiftDuration: The duration used to display a comparison chart. A
	// comparison chart simultaneously shows values from two similar-length
	// time periods (e.g., week-over-week metrics). The duration must be
	// positive, and it can only be applied to charts with data sets of LINE
	// plot type.
	TimeshiftDuration string `json:"timeshiftDuration,omitempty"`

	// XAxis: The properties applied to the X axis.
	XAxis *Axis `json:"xAxis,omitempty"`

	// YAxis: The properties applied to the Y axis.
	YAxis *Axis `json:"yAxis,omitempty"`

	// ForceSendFields is a list of field names (e.g. "ChartOptions") to
	// unconditionally include in API requests. By default, fields with
	// empty values are omitted from API requests. However, any non-pointer,
	// non-interface field appearing in ForceSendFields will be sent to the
	// server regardless of whether the field is empty or not. This may be
	// used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "ChartOptions") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}