fs

package
v0.0.0-...-2208570 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Feb 27, 2021 License: BSD-2-Clause Imports: 3 Imported by: 3

Documentation

Overview

Package fs defines the interface for all filesystems.

Index

Constants

View Source
const (
	// WhenceFromStart means the offset starts at the beginning of the file
	WhenceFromStart = iota
	// WhenceFromCurrent means the offset starts at the current file position
	WhenceFromCurrent
	// WhenceFromEnd means the offset starts at the end of the file
	WhenceFromEnd
)

Whence is used to explain the meaning of an offset in a file

Variables

View Source
var (
	// ErrInvalidArgs indicates the arguments were invalid
	ErrInvalidArgs = os.ErrInvalid

	// ErrNotFound indicates that the requested resource was not found
	ErrNotFound = os.ErrNotExist

	// ErrAlreadyExists indicates that requested resource already exists
	ErrAlreadyExists = os.ErrExist

	// ErrPermission indicates that the operation failed due to insufficient permissions
	ErrPermission = os.ErrPermission

	// ErrReadOnly indicates that the operation failed because the underlying resource is read only
	ErrReadOnly = ErrPermission

	// ErrNoSpace indicates that a resource (such as disk space) has been used up
	ErrNoSpace = errors.New("a filesystem resource has been exhausted")

	// ErrFailedPrecondition indicates the system is not in a state where the operation can succeed
	ErrFailedPrecondition = errors.New("the filesystem is not in a state required for the operation")

	// ErrNotEmpty indicates that the caller attempted to remove a non-empty directory
	ErrNotEmpty = errors.New("directory is not empty")

	// ErrNotOpen indicates that the caller is attempting to access a file or directory
	// that is not currently open.
	ErrNotOpen = errors.New("file or directory not open")

	// ErrNotAFile indicatess that the caller attempted to open a file using a path
	// that did not point to a file
	ErrNotAFile = errors.New("not a file")

	// ErrNotADir indicates that the caller attempted to open a directory using a path
	// that did not point to a directory
	ErrNotADir = errors.New("not a directory")

	// ErrIsActive indicates that the caller attempted to unlink a directory with active
	// references
	ErrIsActive = errors.New("directory has active references")

	// ErrUnmounted indicates that the entire filesystem has been unmounted, and all future
	// operations will fail
	ErrUnmounted = errors.New("operation failed because filesystem is unmounted")

	// ErrEOF indicates that an operation ended because the end the file / directory was reached
	ErrEOF = errors.New("EOF hit before operation completed")

	// ErrNotSupported indicates that the requested operation is not supported
	ErrNotSupported = errors.New("operation not supported")

	// ErrIO indicates that an otherwise unspecified error occured during an I/O operation.
	ErrIO = errors.New("error occured during I/O")
)

Functions

This section is empty.

Types

type Directory

type Directory interface {
	// Close closes the file, decrements the active reference count for it, and frees the
	// blocks pointed to by the file if there are no more active references to it and it is no
	// longer linked to by any directory.  Returns an error, if any.  The returned error is purely
	// informational and the close must not be retried.
	Close() error

	// Stat returns the size, last access time, and last modified time (if known) of the directory.
	Stat() (int64, time.Time, time.Time, error)

	// Touch updates the directory's access and modification times.
	Touch(lastAccess, lastModified time.Time) error

	// Dup returns a directory which shares all the information as 'this' directory, including the
	// permissions and file seek position.
	Dup() (Directory, error)

	// Read returns the contents of the directory and an error, if any.
	Read() ([]Dirent, error)

	// Open opens the file pointed to by "name".
	// d is considered the current directory for the "name".
	Open(name string, flags OpenFlags) (File, Directory, *Remote, error)

	// Rename renames the resource pointed to by src to dst.
	// Renaming a file or directory will not affect any active references to that file/directory.
	// Rename will overwrite dst if it already exists.  Returns an error, if any.
	Rename(dstparent Directory, src, dst string) error

	// Sync does not return until all changes to this directory have been persisted to stable
	// storage.  Returns an error, if any.
	Sync() error

	// Unlink unlinks target from its parent directory.
	// If target points to a directory, then the directory must be empty and it must not have
	// any active references.  If there are no more directories that link to target, then the blocks
	// held by target will be freed.  However, if target is a file and there are currently active
	// references to it then the blocks will not be freed until all the active references have been
	// closed. Returns an error, if any.
	Unlink(target string) error
}

Directory represents the generic methods that can be taken on directory.

type Dirent

type Dirent interface {
	// GetType returns the generic FileType of a Dirent.
	GetType() FileType
	// GetIno return the inode associated with the dirent,
	// if there is one.
	GetIno() uint64
	// GetName returns the name of a Dirent.
	GetName() string
}

Dirent represents a directory entry in a generic file system.

type File

type File interface {
	// Close closes the file, decrements the active reference count for it, and frees the blocks
	// pointed to by the file if there are no more active references to it and it is no longer
	// linked to by any directory.  Returns an error, if any.  The returned error is purely
	// informational and the close must not be retried.
	Close() error

	// Stat returns the size, last access time, and last modified time of the file.
	Stat() (int64, time.Time, time.Time, error)

	// Touch updates the file's access and modification times.
	Touch(lastAccess, lastModified time.Time) error

	// Dup returns a file which shares all the information as 'this' file, including the
	// permissions and file seek position.
	Dup() (File, error)

	// GetOpenFlags returns the open flags used to open the file
	GetOpenFlags() OpenFlags

	// SetOpenFlags attempts to update the open flags. May return an
	// error if the operation is not supported.
	SetOpenFlags(flags OpenFlags) error

	// Read reads a maximum of len(p) bytes into "p" from the file at a location decided by "off"
	// and "whence".
	// The seek position is only updated if fs.WhenceFromCurrent is passed as whence.
	Read(p []byte, off int64, whence int) (int, error)

	// Write writes a maximum of len(p) bytes from "p" into the file at a location decided by
	// "off" and "whence".
	// The seek position is only updated if fs.WhenceFromCurrent is passed as whence.
	Write(p []byte, off int64, whence int) (int, error)

	// Truncate reduces/expands the file to the size specified by "size" in bytes.
	// If the file length is increased, it is filled with zeroes.
	// Truncate does not modify the seek position.
	Truncate(size uint64) error

	// Tell identifies what the current seek position is.
	Tell() (int64, error)

	// Seek modified the seek position to offset + some starting position, dependent on whence.
	// Seek returns the new seek position.
	Seek(offset int64, whence int) (int64, error)

	// Sync does not return until all changes to this file have been persisted to stable storage.
	// Returns an error, if any.
	Sync() error
}

File represents a normal file on the filesystem.

type FileSystem

type FileSystem interface {
	// Blockcount return the total number of blocks in the file system.
	Blockcount() int64

	// Blocksize returns the size of a single block (in bytes) in the file system.
	Blocksize() int64

	// Size returns the full size of the file system.  Equivalent to f.Blocksize() * f.Blockcount().
	Size() int64

	// Close closes the file system and cleans up any memory used by it.  To prevent memory leaks, it is
	// required for callers to call Close before converting the filesystem object into garbage for the
	// GC.  The returned error is informational only and the Close may not be retried.
	Close() error

	// RootDirectory returns the root directory for the file system.  Callers must close the returned
	// directory to ensure that all changes persist to disk.
	RootDirectory() Directory

	// Type returns the type of the file system as a string
	Type() string

	// FreeSize returns the free capacity of the filesystem (in bytes). If the free capacity is
	// unknown, it will instead return the value of Size().
	FreeSize() int64
}

FileSystem represents a generic filesystem.

type FileSystemOptions

type FileSystemOptions int

FileSystemOptions defines the options a client can request for a filesystem.

const (
	// ReadOnly indicates that the file system should be opened only for reading.
	ReadOnly FileSystemOptions = 1 << iota

	// ReadWrite indicates that the file system should be opened for reading as well as
	// writing.
	ReadWrite

	// Force indicates that the file system should be opened regardless of the feature
	// sets listed in the superblock.
	Force
)

type FileType

type FileType int

FileType describes the type of a given file.

const (
	FileTypeUnknown FileType = iota
	FileTypeRegularFile
	FileTypeDirectory
	FileTypeCharacterDevice
	FileTypeBlockDevice
	FileTypeFifo
	FileTypeSocket
	FileTypeSymlink
)

Generic FileTypes.

type OpenFlags

type OpenFlags uint32

OpenFlags defines the options a client can request when opening a file or directory.

const (
	// OpenFlagRead indicates the file should be opened with read permissions
	OpenFlagRead OpenFlags = 1 << iota
	// OpenFlagWrite indicates the file should be opened with write permissions
	OpenFlagWrite
	// OpenFlagAdmin indicates the connection can mount/unmount the filesystem
	OpenFlagAdmin
	// OpenFlagExecute indicates that the file should be opened executably mapable.
	OpenFlagExecute
	// OpenFlagCreate indicates the file should be created if it does not exist (only valid with
	// "write")
	OpenFlagCreate OpenFlags = 1 << (iota + 12)
	// OpenFlagExclusive indicates that the operation should fail if it already exists (only valid
	// with "create")
	OpenFlagExclusive
	// OpenFlagTruncate indicates the file should be truncated before writing (only valid with
	// "write")
	OpenFlagTruncate
	// OpenFlagDirectory indicates the operation must act on a directory
	OpenFlagDirectory
	// OpenFlagAppend indicates all writes should append to the file (only valid with "write")
	OpenFlagAppend

	// OpenFlagPath indicates the operation should only open the file descriptor,
	// not actually opening the file.
	OpenFlagPath
	// OpenFlagFile indicates the operation must act on a file
	OpenFlagFile
	// OpenFlagDescribe indicates the open request should return a response
	OpenFlagDescribe OpenFlags = (1 << 23)
)

func (OpenFlags) Admin

func (f OpenFlags) Admin() bool

Admin returns if the Admin permission is active

func (OpenFlags) Append

func (f OpenFlags) Append() bool

Append returns if the Append permission is active

func (OpenFlags) Create

func (f OpenFlags) Create() bool

Create returns if the Create flag is active

func (OpenFlags) Describe

func (f OpenFlags) Describe() bool

func (OpenFlags) Directory

func (f OpenFlags) Directory() bool

Directory returns if the Directory flag is active

func (OpenFlags) Exclusive

func (f OpenFlags) Exclusive() bool

Exclusive returns if the Exclusive flag is active

func (OpenFlags) Execute

func (f OpenFlags) Execute() bool

Execute returns if the Execute permission is active

func (OpenFlags) File

func (f OpenFlags) File() bool

File returns if the File flag is active

func (OpenFlags) Path

func (f OpenFlags) Path() bool

func (OpenFlags) Read

func (f OpenFlags) Read() bool

Read returns if the Read permission is active

func (OpenFlags) Truncate

func (f OpenFlags) Truncate() bool

Truncate returns if the Truncate flag is active

func (OpenFlags) Write

func (f OpenFlags) Write() bool

Write returns if the Write permission is active

type Remote

type Remote struct{}

Remote is not supported on non-fuchsia systems.

Directories

Path Synopsis
Package msdosfs implements the FAT filesystem
Package msdosfs implements the FAT filesystem
bootrecord
Package bootrecord describes the first sectors of a partition, which hold filesystem metadata.
Package bootrecord describes the first sectors of a partition, which hold filesystem metadata.
clock
Package clock allows the current time to be overloaded
Package clock allows the current time to be overloaded
cluster
Package cluster is responsible for opening and using the FAT.
Package cluster is responsible for opening and using the FAT.
cluster/fat
Package fat contains the actual File Allocation Table used by the FAT filesystem.
Package fat contains the actual File Allocation Table used by the FAT filesystem.
cluster/fat/fsinfo
Package fsinfo describes the FAT32-exclusive FSInfo structure
Package fsinfo describes the FAT32-exclusive FSInfo structure
direntry
Package direntry describes FAT directory entries.
Package direntry describes FAT directory entries.
testutil
Package testutil provides utilities which help test the FAT filesystem.
Package testutil provides utilities which help test the FAT filesystem.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL