framework

package
v1.14.6 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Aug 16, 2019 License: Apache-2.0 Imports: 126 Imported by: 0

Documentation

Overview

Package framework contains provider-independent helper code for building and running E2E tests with Ginkgo. The actual Ginkgo test suites gets assembled by combining this framework, the optional provider support code and specific tests via a separate .go file like Kubernetes' test/e2e.go.

Index

Constants

View Source
const (
	// GPUResourceName is the extended name of the GPU resource since v1.8
	// this uses the device plugin mechanism
	NVIDIAGPUResourceName = "nvidia.com/gpu"

	// TODO: Parametrize it by making it a feature in TestFramework.
	// so we can override the daemonset in other setups (non COS).
	// GPUDevicePluginDSYAML is the official Google Device Plugin Daemonset NVIDIA GPU manifest for GKE
	GPUDevicePluginDSYAML = "https://raw.githubusercontent.com/kubernetes/kubernetes/master/cluster/addons/device-plugins/nvidia-gpu/daemonset.yaml"
)
View Source
const (
	// How long to wait for a job to finish.
	JobTimeout = 15 * time.Minute

	// Job selector name
	JobSelectorKey = "job"
)
View Source
const (
	EndpointHttpPort      = 8080
	EndpointUdpPort       = 8081
	TestContainerHttpPort = 8080
	ClusterHttpPort       = 80
	ClusterUdpPort        = 90

	// Number of checks to hit a given set of endpoints when enable session affinity.
	SessionAffinityChecks = 10
)
View Source
const (
	PDRetryTimeout    = 5 * time.Minute
	PDRetryPollTime   = 5 * time.Second
	VolumeSelectorKey = "e2e-pv-pool"
)
View Source
const (
	// KubeProxyLagTimeout is the maximum time a kube-proxy daemon on a node is allowed
	// to not notice a Service update, such as type=NodePort.
	// TODO: This timeout should be O(10s), observed values are O(1m), 5m is very
	// liberal. Fix tracked in #20567.
	KubeProxyLagTimeout = 5 * time.Minute

	// KubeProxyEndpointLagTimeout is the maximum time a kube-proxy daemon on a node is allowed
	// to not notice an Endpoint update.
	KubeProxyEndpointLagTimeout = 30 * time.Second

	// LoadBalancerLagTimeoutDefault is the maximum time a load balancer is allowed to
	// not respond after creation.
	LoadBalancerLagTimeoutDefault = 2 * time.Minute

	// LoadBalancerLagTimeoutAWS is the delay between ELB creation and serving traffic
	// on AWS. A few minutes is typical, so use 10m.
	LoadBalancerLagTimeoutAWS = 10 * time.Minute

	// How long to wait for a load balancer to be created/modified.
	//TODO: once support ticket 21807001 is resolved, reduce this timeout back to something reasonable
	LoadBalancerCreateTimeoutDefault = 20 * time.Minute
	LoadBalancerCreateTimeoutLarge   = 2 * time.Hour

	// Time required by the loadbalancer to cleanup, proportional to numApps/Ing.
	// Bring the cleanup timeout back down to 5m once b/33588344 is resolved.
	LoadBalancerCleanupTimeout = 15 * time.Minute

	// On average it takes ~6 minutes for a single backend to come online in GCE.
	LoadBalancerPollTimeout  = 15 * time.Minute
	LoadBalancerPollInterval = 30 * time.Second

	LargeClusterMinNodesNumber = 100

	// Don't test with more than 3 nodes.
	// Many tests create an endpoint per node, in large clusters, this is
	// resource and time intensive.
	MaxNodesForEndpointsTests = 3

	// ServiceTestTimeout is used for most polling/waiting activities
	ServiceTestTimeout = 60 * time.Second

	// GCPMaxInstancesInInstanceGroup is the maximum number of instances supported in
	// one instance group on GCP.
	GCPMaxInstancesInInstanceGroup = 2000

	// AffinityConfirmCount is the number of needed continuous requests to confirm that
	// affinity is enabled.
	AffinityConfirmCount = 15
)
View Source
const (
	// Poll interval for StatefulSet tests
	StatefulSetPoll = 10 * time.Second
	// Timeout interval for StatefulSet operations
	StatefulSetTimeout = 10 * time.Minute
	// Timeout for stateful pods to change state
	StatefulPodTimeout = 5 * time.Minute
)
View Source
const (
	// How long to wait for the pod to be listable
	PodListTimeout = time.Minute
	// Initial pod start can be delayed O(minutes) by slow docker pulls
	// TODO: Make this 30 seconds once #4566 is resolved.
	PodStartTimeout = 5 * time.Minute

	// Same as `PodStartTimeout` to wait for the pod to be started, but shorter.
	// Use it case by case when we are sure pod start will not be delayed
	// minutes by slow docker pulls or something else.
	PodStartShortTimeout = 2 * time.Minute

	// How long to wait for a pod to be deleted
	PodDeleteTimeout = 5 * time.Minute

	// PodEventTimeout is how much we wait for a pod event to occur.
	PodEventTimeout = 2 * time.Minute

	// If there are any orphaned namespaces to clean up, this test is running
	// on a long lived cluster. A long wait here is preferably to spurious test
	// failures caused by leaked resources from a previous test run.
	NamespaceCleanupTimeout = 15 * time.Minute

	// How long to wait for a service endpoint to be resolvable.
	ServiceStartTimeout = 3 * time.Minute

	// How often to Poll pods, nodes and claims.
	Poll = 2 * time.Second

	// service accounts are provisioned after namespace creation
	// a service account is required to support pod creation in a namespace as part of admission control
	ServiceAccountProvisionTimeout = 2 * time.Minute

	// How long to try single API calls (like 'get' or 'list'). Used to prevent
	// transient failures from failing tests.
	// TODO: client should not apply this timeout to Watch calls. Increased from 30s until that is fixed.
	SingleCallTimeout = 5 * time.Minute

	// How long nodes have to be "ready" when a test begins. They should already
	// be "ready" before the test starts, so this is small.
	NodeReadyInitialTimeout = 20 * time.Second

	// How long pods have to be "ready" when a test begins.
	PodReadyBeforeTimeout = 5 * time.Minute

	ServiceRespondingTimeout = 2 * time.Minute
	EndpointRegisterTimeout  = time.Minute

	// How long claims have to become dynamically provisioned
	ClaimProvisionTimeout = 5 * time.Minute

	// Same as `ClaimProvisionTimeout` to wait for claim to be dynamically provisioned, but shorter.
	// Use it case by case when we are sure this timeout is enough.
	ClaimProvisionShortTimeout = 1 * time.Minute

	// How long claims have to become bound
	ClaimBindingTimeout = 3 * time.Minute

	// How long claims have to become deleted
	ClaimDeletingTimeout = 3 * time.Minute

	// How long PVs have to beome reclaimed
	PVReclaimingTimeout = 3 * time.Minute

	// How long PVs have to become bound
	PVBindingTimeout = 3 * time.Minute

	// How long PVs have to become deleted
	PVDeletingTimeout = 3 * time.Minute

	// How long a node is allowed to become "Ready" after it is restarted before
	// the test is considered failed.
	RestartNodeReadyAgainTimeout = 5 * time.Minute

	// How long a pod is allowed to become "running" and "ready" after a node
	// restart before test is considered failed.
	RestartPodReadyAgainTimeout = 5 * time.Minute

	// How long for snapshot to create snapshotContent
	SnapshotCreateTimeout = 5 * time.Minute
)
View Source
const (
	Kb  int64 = 1000
	Mb  int64 = 1000 * Kb
	Gb  int64 = 1000 * Mb
	Tb  int64 = 1000 * Gb
	KiB int64 = 1024
	MiB int64 = 1024 * KiB
	GiB int64 = 1024 * MiB
	TiB int64 = 1024 * GiB

	// Waiting period for volume server (Ceph, ...) to initialize itself.
	VolumeServerPodStartupTimeout = 3 * time.Minute

	// Waiting period for pod to be cleaned up and unmount its volumes so we
	// don't tear down containers with NFS/Ceph/Gluster server too early.
	PodCleanupTimeout = 20 * time.Second
)
View Source
const CurrentKubeletPerfMetricsVersion = "v2"

CurrentKubeletPerfMetricsVersion is the current kubelet performance metrics version. This is used by mutiple perf related data structures. We should bump up the version each time we make an incompatible change to the metrics.

View Source
const (
	// Default value for how long the CPU profile is gathered for.
	DefaultCPUProfileSeconds = 30
)
View Source
const (

	// TODO(mikedanese): reset this to 5 minutes once #47135 is resolved.
	// ref https://github.com/kubernetes/kubernetes/issues/47135
	DefaultNamespaceDeletionTimeout = 10 * time.Minute
)
View Source
const (

	// DefaultNumNodes is the number of nodes. If not specified, then number of nodes is auto-detected
	DefaultNumNodes = -1
)
View Source
const DefaultPodDeletionTimeout = 3 * time.Minute
View Source
const NoCPUConstraint = math.MaxFloat64
View Source
const (
	// NodeStartupThreshold is a rough estimate of the time allocated for a pod to start on a node.
	NodeStartupThreshold = 4 * time.Second
)

Variables

View Source
var (
	BusyBoxImage = imageutils.GetE2EImage(imageutils.BusyBox)

	// Serve hostname image name
	ServeHostnameImage = imageutils.GetE2EImage(imageutils.ServeHostname)
)
View Source
var Factories = map[What]ItemFactory{
	{"ClusterRole"}:        &clusterRoleFactory{},
	{"ClusterRoleBinding"}: &clusterRoleBindingFactory{},
	{"DaemonSet"}:          &daemonSetFactory{},
	{"Role"}:               &roleFactory{},
	{"RoleBinding"}:        &roleBindingFactory{},
	{"Secret"}:             &secretFactory{},
	{"Service"}:            &serviceFactory{},
	{"ServiceAccount"}:     &serviceAccountFactory{},
	{"StatefulSet"}:        &statefulSetFactory{},
	{"StorageClass"}:       &storageClassFactory{},
}
View Source
var ImageWhiteList sets.String

ImageWhiteList is the images used in the current test suite. It should be initialized in test suite and the images in the white list should be pre-pulled in the test suite. Currently, this is only used by node e2e test.

View Source
var InterestingAPIServerMetrics = []string{
	"apiserver_request_total",

	"apiserver_request_latencies_summary",
	"apiserver_init_events_total",
}
View Source
var InterestingClusterAutoscalerMetrics = []string{
	"function_duration_seconds",
	"errors_total",
	"evicted_pods_total",
}
View Source
var InterestingControllerManagerMetrics = []string{
	"garbage_collector_attempt_to_delete_queue_latency",
	"garbage_collector_attempt_to_delete_work_duration",
	"garbage_collector_attempt_to_orphan_queue_latency",
	"garbage_collector_attempt_to_orphan_work_duration",
	"garbage_collector_dirty_processing_latency_microseconds",
	"garbage_collector_event_processing_latency_microseconds",
	"garbage_collector_graph_changes_queue_latency",
	"garbage_collector_graph_changes_work_duration",
	"garbage_collector_orphan_processing_latency_microseconds",

	"namespace_queue_latency",
	"namespace_queue_latency_sum",
	"namespace_queue_latency_count",
	"namespace_retries",
	"namespace_work_duration",
	"namespace_work_duration_sum",
	"namespace_work_duration_count",
}
View Source
var InterestingKubeletMetrics = []string{
	"kubelet_container_manager_latency_microseconds",
	"kubelet_docker_errors",
	"kubelet_docker_operations_duration_seconds",
	"kubelet_generate_pod_status_latency_microseconds",
	"kubelet_pod_start_duration_seconds",
	"kubelet_pod_worker_duration_seconds",
	"kubelet_pod_worker_start_duration_seconds",
	"kubelet_sync_pods_latency_microseconds",
}
View Source
var ItemNotSupported = errors.New("not supported")

ItemNotSupported is the error that Create methods must return or wrap when they don't support the given item.

View Source
var ProvidersWithSSH = []string{"gce", "gke", "aws", "local"}

ProvidersWithSSH are those providers where each node is accessible with SSH

View Source
var RunId = uuid.NewUUID()

unique identifier of the e2e run

View Source
var (
	// Common selinux labels
	SELinuxLabel = &v1.SELinuxOptions{
		Level: "s0:c0,c1"}
)
View Source
var ServiceNodePortRange = utilnet.PortRange{Base: 30000, Size: 2768}

This should match whatever the default/configured range is

Functions

func AddOrUpdateAvoidPodOnNode added in v1.7.0

func AddOrUpdateAvoidPodOnNode(c clientset.Interface, nodeName string, avoidPods v1.AvoidPods)

AddOrUpdateAvoidPodOnNode adds avoidPods annotations to node, will override if it exists

func AddOrUpdateLabelOnNode added in v1.4.2

func AddOrUpdateLabelOnNode(c clientset.Interface, nodeName string, labelKey, labelValue string)

func AddOrUpdateLabelOnNodeAndReturnOldValue added in v1.8.0

func AddOrUpdateLabelOnNodeAndReturnOldValue(c clientset.Interface, nodeName string, labelKey, labelValue string) string

func AddOrUpdateTaintOnNode added in v1.4.2

func AddOrUpdateTaintOnNode(c clientset.Interface, nodeName string, taint v1.Taint)

func AfterReadingAllFlags added in v1.7.0

func AfterReadingAllFlags(t *TestContextType)

AfterReadingAllFlags makes changes to the context after all flags have been read.

func AllNodesReady

func AllNodesReady(c clientset.Interface, timeout time.Duration) error

Checks whether all registered nodes are ready. TODO: we should change the AllNodesReady call in AfterEach to WaitForAllNodesHealthy, and figure out how to do it in a configurable way, as we can't expect all setups to run default test add-ons.

func ApiCallToPerfData

func ApiCallToPerfData(apicalls *APIResponsiveness) *perftype.PerfData

ApiCallToPerfData transforms APIResponsiveness to PerfData.

func AssertCleanup

func AssertCleanup(ns string, selectors ...string)

Asserts that cleanup of a namespace wrt selectors occurred.

func BindClusterRole added in v1.6.0

func BindClusterRole(c v1beta1rbac.ClusterRoleBindingsGetter, clusterRole, ns string, subjects ...rbacv1beta1.Subject)

BindClusterRole binds the cluster role at the cluster scope

func BindClusterRoleInNamespace added in v1.6.0

func BindClusterRoleInNamespace(c v1beta1rbac.RoleBindingsGetter, clusterRole, ns string, subjects ...rbacv1beta1.Subject)

BindClusterRoleInNamespace binds the cluster role at the namespace scope

func BindRoleInNamespace added in v1.8.3

func BindRoleInNamespace(c v1beta1rbac.RoleBindingsGetter, role, ns string, subjects ...rbacv1beta1.Subject)

BindRoleInNamespace binds the role at the namespace scope

func BlockNetwork

func BlockNetwork(from string, to string)

The following helper functions can block/unblock network from source host to destination host by manipulating iptable rules. This function assumes it can ssh to the source host.

Caution: Recommend to input IP instead of hostnames. Using hostnames will cause iptables to do a DNS lookup to resolve the name to an IP address, which will slow down the test and cause it to fail if DNS is absent or broken.

Suggested usage pattern:

func foo() {
	...
	defer UnblockNetwork(from, to)
	BlockNetwork(from, to)
	...
}

func CPUUsageToPerfData

func CPUUsageToPerfData(usagePerNode NodesCPUSummary) *perftype.PerfData

CPUUsageToPerfData transforms NodesCPUSummary to PerfData.

func CPUUsageToPerfDataWithLabels added in v1.4.2

func CPUUsageToPerfDataWithLabels(usagePerNode NodesCPUSummary, labels map[string]string) *perftype.PerfData

CPUUsageToPerfDataWithLabels transforms NodesCPUSummary to PerfData with additional labels.

func CheckAffinity added in v1.11.2

func CheckAffinity(jig *ServiceTestJig, execPod *v1.Pod, targetIp string, targetPort int, shouldHold bool) bool

CheckAffinity function tests whether the service affinity works as expected. If affinity is expected, the test will return true once affinityConfirmCount number of same response observed in a row. If affinity is not expected, the test will keep observe until different responses observed. The function will return false only in case of unexpected errors.

func CheckConnectivityToHost

func CheckConnectivityToHost(f *Framework, nodeName, podName, host string, pingCmd PingCommand, timeout int) error

CheckConnectivityToHost launches a pod to test connectivity to the specified host. An error will be returned if the host is not reachable from the pod.

An empty nodeName will use the schedule to choose where the pod is executed.

func CheckDeploymentRevisionAndImage added in v1.9.0

func CheckDeploymentRevisionAndImage(c clientset.Interface, ns, deploymentName, revision, image string) error

CheckDeploymentRevisionAndImage checks if the input deployment's and its new replica set's revision and image are as expected.

func CheckForAllJobPodsRunning added in v1.6.0

func CheckForAllJobPodsRunning(c clientset.Interface, ns, jobName string, parallelism int32) (bool, error)

CheckForAllJobPodsRunning uses c to check in the Job named jobName in ns is running. If the returned error is not nil the returned bool is true if the Job is running.

func CheckForControllerManagerHealthy added in v1.9.0

func CheckForControllerManagerHealthy(duration time.Duration) error

CheckForControllerManagerHealthy checks that the controller manager does not crash within "duration"

func CheckInvariants

func CheckInvariants(events []watch.Event, fns ...InvariantFunc) error

func CheckMasterVersion added in v1.6.0

func CheckMasterVersion(c clientset.Interface, want string) error

func CheckNewRSAnnotations

func CheckNewRSAnnotations(c clientset.Interface, ns, deploymentName string, expectedAnnotations map[string]string) error

CheckNewRSAnnotations check if the new RS's annotation is as expected

func CheckNodesReady

func CheckNodesReady(c clientset.Interface, size int, timeout time.Duration) ([]v1.Node, error)

CheckNodesReady waits up to timeout for cluster to has desired size and there is no not-ready nodes in it. By cluster size we mean number of Nodes excluding Master Node.

func CheckNodesVersions added in v1.6.0

func CheckNodesVersions(cs clientset.Interface, want string) error

func CheckPodsCondition

func CheckPodsCondition(c clientset.Interface, ns string, podNames []string, timeout time.Duration, condition podCondition, desc string) bool

CheckPodsCondition returns whether all pods whose names are listed in podNames in namespace ns are in the condition, using c and waiting at most timeout.

func CheckPodsRunningReady

func CheckPodsRunningReady(c clientset.Interface, ns string, podNames []string, timeout time.Duration) bool

CheckPodsRunningReady returns whether all pods whose names are listed in podNames in namespace ns are running and ready, using c and waiting at most timeout.

func CheckPodsRunningReadyOrSucceeded

func CheckPodsRunningReadyOrSucceeded(c clientset.Interface, ns string, podNames []string, timeout time.Duration) bool

CheckPodsRunningReadyOrSucceeded returns whether all pods whose names are listed in podNames in namespace ns are running and ready, or succeeded; use c and waiting at most timeout.

func CheckReachabilityFromPod added in v1.6.0

func CheckReachabilityFromPod(expectToBeReachable bool, timeout time.Duration, namespace, pod, target string)

func CheckTestingNSDeletedExcept

func CheckTestingNSDeletedExcept(c clientset.Interface, skip string) error

CheckTestingNSDeletedExcept checks whether all e2e based existing namespaces are in the Terminating state and waits until they are finally deleted. It ignores namespace skip.

func CleanUpVolumeServer added in v1.12.0

func CleanUpVolumeServer(f *Framework, serverPod *v1.Pod)

Wrapper of cleanup function for volume server without secret created by specific CreateStorageServer function.

func CleanUpVolumeServerWithSecret added in v1.12.0

func CleanUpVolumeServerWithSecret(f *Framework, serverPod *v1.Pod, secret *v1.Secret)

Wrapper of cleanup function for volume server with secret created by specific CreateStorageServer function.

func Cleanup

func Cleanup(filePath, ns string, selectors ...string)

Stops everything from filePath from namespace ns and checks if everything matching selectors from the given namespace is correctly stopped.

func CleanupServiceResources added in v1.7.0

func CleanupServiceResources(c clientset.Interface, loadBalancerName, region, zone string)

func ClusterMonitoringModeIs added in v1.9.0

func ClusterMonitoringModeIs(monitoringModes ...string) bool

func CollectAddresses added in v1.6.0

func CollectAddresses(nodes *v1.NodeList, addressType v1.NodeAddressType) []string

func ConformanceIt added in v1.9.0

func ConformanceIt(text string, body interface{}, timeout ...float64) bool

Wrapper function for ginkgo It. Adds "[Conformance]" tag and makes static analysis easier.

func ContainerInitInvariant

func ContainerInitInvariant(older, newer runtime.Object) error

func CoreDump

func CoreDump(dir string)

CoreDump SSHs to the master and all nodes and dumps their logs into dir. It shells out to cluster/log-dump/log-dump.sh to accomplish this.

func CreateClientPod added in v1.6.0

func CreateClientPod(c clientset.Interface, ns string, pvc *v1.PersistentVolumeClaim) (*v1.Pod, error)

Define and create a pod with a mounted PV. Pod runs infinite loop until killed.

func CreateDeployment added in v1.9.0

func CreateDeployment(client clientset.Interface, replicas int32, podLabels map[string]string, nodeSelector map[string]string, namespace string, pvclaims []*v1.PersistentVolumeClaim, command string) (*apps.Deployment, error)

func CreateEmptyFileOnPod added in v1.7.0

func CreateEmptyFileOnPod(namespace string, podName string, filePath string) error

create empty file at given path on the pod.

func CreateExecPodOrFail added in v1.6.0

func CreateExecPodOrFail(client clientset.Interface, ns, generateName string, tweak func(*v1.Pod)) string

CreateExecPodOrFail creates a simple busybox pod in a sleep loop used as a vessel for kubectl exec commands. Returns the name of the created pod.

func CreateGCEVolume added in v1.9.0

func CreateGCEVolume() (*v1.PersistentVolumeSource, string)

func CreateJob added in v1.6.0

func CreateJob(c clientset.Interface, ns string, job *batch.Job) (*batch.Job, error)

CreateJob uses c to create job in namespace ns. If the returned error is nil, the returned Job is valid and has been created.

func CreateManagedInstanceGroup added in v1.10.8

func CreateManagedInstanceGroup(size int64, zone, template string) error

func CreateNginxPod added in v1.11.2

func CreateNginxPod(client clientset.Interface, namespace string, nodeSelector map[string]string, pvclaims []*v1.PersistentVolumeClaim) (*v1.Pod, error)

func CreatePDWithRetry added in v1.6.0

func CreatePDWithRetry() (string, error)

func CreatePDWithRetryAndZone added in v1.7.0

func CreatePDWithRetryAndZone(zone string) (string, error)

func CreatePV added in v1.10.8

create the PV resource. Fails test on error.

func CreatePVC added in v1.6.0

create the PVC resource. Fails test on error.

func CreatePVCPV added in v1.6.0

Create a PVC followed by the PV based on the passed in nfs-server ip and namespace. If the "preBind" bool is true then pre-bind the PV to the PVC via the PV's ClaimRef. Return the pv and pvc to reflect the created objects. Note: in the pre-bind case the real PVC name, which is generated, is not

known until after the PVC is instantiated. This is why the pvc is created
before the pv.

func CreatePVPVC added in v1.6.0

Create a PV followed by the PVC based on the passed in nfs-server ip and namespace. If the "preBind" bool is true then pre-bind the PVC to the PV via the PVC's VolumeName. Return the pv and pvc to reflect the created objects. Note: in the pre-bind case the real PV name, which is generated, is not

known until after the PV is instantiated. This is why the pv is created
before the pvc.

func CreatePVSource added in v1.7.0

func CreatePVSource(zone string) (*v1.PersistentVolumeSource, error)

func CreatePVsPVCs added in v1.6.0

func CreatePVsPVCs(numpvs, numpvcs int, c clientset.Interface, ns string, pvConfig PersistentVolumeConfig, pvcConfig PersistentVolumeClaimConfig) (PVMap, PVCMap, error)

Create the desired number of PVs and PVCs and return them in separate maps. If the number of PVs != the number of PVCs then the min of those two counts is the number of PVs expected to bind. If a Create error occurs, the returned maps may contain pv and pvc entries for the resources that were successfully created. In other words, when the caller sees an error returned, it needs to decide what to do about entries in the maps. Note: when the test suite deletes the namespace orphaned pvcs and pods are deleted. However,

orphaned pvs are not deleted and will remain after the suite completes.

func CreatePod added in v1.7.0

func CreatePod(client clientset.Interface, namespace string, nodeSelector map[string]string, pvclaims []*v1.PersistentVolumeClaim, isPrivileged bool, command string) (*v1.Pod, error)

CreatePod with given claims based on node selector

func CreatePodOrFail added in v1.6.0

func CreatePodOrFail(c clientset.Interface, ns, name string, labels map[string]string, containerPorts []v1.ContainerPort)

func CreatePrivilegedPSPBinding added in v1.8.3

func CreatePrivilegedPSPBinding(f *Framework, namespace string)

func CreateSecPod added in v1.8.0

func CreateSecPod(client clientset.Interface, namespace string, pvclaims []*v1.PersistentVolumeClaim, isPrivileged bool, command string, hostIPC bool, hostPID bool, seLinuxLabel *v1.SELinuxOptions, fsGroup *int64, timeout time.Duration) (*v1.Pod, error)

create security pod with given claims

func CreateSecPodWithNodeName added in v1.12.0

func CreateSecPodWithNodeName(client clientset.Interface, namespace string, pvclaims []*v1.PersistentVolumeClaim, isPrivileged bool, command string, hostIPC bool, hostPID bool, seLinuxLabel *v1.SELinuxOptions, fsGroup *int64, nodeName string, timeout time.Duration) (*v1.Pod, error)

create security pod with given claims

func CreateServiceSpec added in v1.8.0

func CreateServiceSpec(serviceName, externalName string, isHeadless bool, selector map[string]string) *v1.Service

func CreateStatefulSetService added in v1.6.0

func CreateStatefulSetService(name string, labels map[string]string) *v1.Service

CreateStatefulSetService creates a Headless Service with Name name and Selector set to match labels.

func CreateStorageServer added in v1.8.0

func CreateStorageServer(cs clientset.Interface, config VolumeTestConfig) (pod *v1.Pod, ip string)

Wrapper for StartVolumeServer(). A storage server config is passed in, and a pod pointer and ip address string are returned. Note: Expect() is called so no error is returned.

func CreateTestingNS

func CreateTestingNS(baseName string, c clientset.Interface, labels map[string]string) (*v1.Namespace, error)

CreateTestingNS should be used by every test, note that we append a common prefix to the provided test name. Please see NewFramework instead of using this directly.

func CreateUnschedulablePod added in v1.10.8

func CreateUnschedulablePod(client clientset.Interface, namespace string, nodeSelector map[string]string, pvclaims []*v1.PersistentVolumeClaim, isPrivileged bool, command string) (*v1.Pod, error)

CreateUnschedulablePod with given claims based on node selector

func CreateWaitAndDeletePod added in v1.6.0

func CreateWaitAndDeletePod(f *Framework, c clientset.Interface, ns string, pvc *v1.PersistentVolumeClaim) (err error)

Create the test pod, wait for (hopefully) success, and then delete the pod. Note: need named return value so that the err assignment in the defer sets the returned error.

Has been shown to be necessary using Go 1.7.

func DeleteAllStatefulSets added in v1.6.0

func DeleteAllStatefulSets(c clientset.Interface, ns string)

DeleteAllStatefulSets deletes all StatefulSet API Objects in Namespace ns.

func DeleteJob added in v1.6.0

func DeleteJob(c clientset.Interface, ns, name string) error

DeleteJob uses c to delete the Job named name in namespace ns. If the returned error is nil, the Job has been deleted.

func DeleteManagedInstanceGroup added in v1.10.8

func DeleteManagedInstanceGroup(zone string) error

func DeleteNamespaces

func DeleteNamespaces(c clientset.Interface, deleteFilter, skipFilter []string) ([]string, error)

DeleteNamespaces deletes all namespaces that match the given delete and skip filters. Filter is by simple strings.Contains; first skip filter, then delete filter. Returns the list of deleted namespaces or an error.

func DeleteNodeOnCloudProvider added in v1.14.0

func DeleteNodeOnCloudProvider(node *v1.Node) error

func DeletePDWithRetry added in v1.6.0

func DeletePDWithRetry(diskName string) error

func DeletePVCandValidatePV added in v1.6.0

func DeletePVCandValidatePV(c clientset.Interface, ns string, pvc *v1.PersistentVolumeClaim, pv *v1.PersistentVolume, expectPVPhase v1.PersistentVolumePhase) error

Delete the PVC and wait for the PV to enter its expected phase. Validate that the PV has been reclaimed (assumption here about reclaimPolicy). Caller tells this func which phase value to expect for the pv bound to the to-be-deleted claim.

func DeletePVCandValidatePVGroup added in v1.6.0

func DeletePVCandValidatePVGroup(c clientset.Interface, ns string, pvols PVMap, claims PVCMap, expectPVPhase v1.PersistentVolumePhase) error

Wraps deletePVCandValidatePV() by calling the function in a loop over the PV map. Only bound PVs are deleted. Validates that the claim was deleted and the PV is in the expected Phase (Released, Available, Bound). Note: if there are more claims than pvs then some of the remaining claims may bind to just made

available pvs.

func DeletePVSource added in v1.7.0

func DeletePVSource(pvSource *v1.PersistentVolumeSource) error

func DeletePersistentVolume added in v1.6.0

func DeletePersistentVolume(c clientset.Interface, pvName string) error

Delete the PV.

func DeletePersistentVolumeClaim added in v1.6.0

func DeletePersistentVolumeClaim(c clientset.Interface, pvcName string, ns string) error

Delete the Claim

func DeletePodOrFail added in v1.6.0

func DeletePodOrFail(c clientset.Interface, ns, name string)

func DeletePodWithWait added in v1.6.0

func DeletePodWithWait(f *Framework, c clientset.Interface, pod *v1.Pod) error

Deletes the passed-in pod and waits for the pod to be terminated. Resilient to the pod not existing.

func DeletePodWithWaitByName added in v1.10.8

func DeletePodWithWaitByName(f *Framework, c clientset.Interface, podName, podNamespace string) error

Deletes the named and namespaced pod and waits for the pod to be terminated. Resilient to the pod not existing.

func DeleteRCAndWaitForGC added in v1.4.2

func DeleteRCAndWaitForGC(c clientset.Interface, ns, name string) error

DeleteRCAndWaitForGC deletes only the Replication Controller and waits for GC to delete the pods.

func DeleteResourceAndWaitForGC added in v1.6.0

func DeleteResourceAndWaitForGC(c clientset.Interface, kind schema.GroupKind, ns, name string) error

DeleteResourceAndWaitForGC deletes only given resource and waits for GC to delete the pods.

func DescribeIng added in v1.6.0

func DescribeIng(ns string)

func DescribeItem added in v1.13.1

func DescribeItem(item interface{}) string

DescribeItem always returns a string that describes the item, usually by calling out to cache.MetaNamespaceKeyFunc which concatenates namespace (if set) and name. If that fails, the entire item gets converted to a string.

func DescribeSvc added in v1.6.0

func DescribeSvc(ns string)

func DsFromManifest added in v1.8.2

func DsFromManifest(url string) (*apps.DaemonSet, error)

DsFromManifest reads a .json/yaml file and returns the daemonset in it.

func DumpAllNamespaceInfo

func DumpAllNamespaceInfo(c clientset.Interface, namespace string)

func DumpDebugInfo added in v1.8.0

func DumpDebugInfo(c clientset.Interface, ns string)

func DumpEventsInNamespace added in v1.5.0

func DumpEventsInNamespace(eventsLister EventsLister, namespace string)

func DumpNodeDebugInfo

func DumpNodeDebugInfo(c clientset.Interface, nodeNames []string, logFunc func(fmt string, args ...interface{}))

func EnableAndDisableInternalLB added in v1.7.8

func EnableAndDisableInternalLB() (enable func(svc *v1.Service), disable func(svc *v1.Service))

EnableAndDisableInternalLB returns two functions for enabling and disabling the internal load balancer setting for the supported cloud providers (currently GCE/GKE and Azure) and empty functions for others.

func EnsureLoadBalancerResourcesDeleted

func EnsureLoadBalancerResourcesDeleted(ip, portRange string) error

EnsureLoadBalancerResourcesDeleted ensures that cloud load balancer resources that were created are actually cleaned up. Currently only implemented for GCE/GKE.

func EtcdUpgrade added in v1.5.5

func EtcdUpgrade(target_storage, target_version string) error

func ExpectNoError

func ExpectNoError(err error, explain ...interface{})

func ExpectNoErrorWithOffset added in v1.7.0

func ExpectNoErrorWithOffset(offset int, err error, explain ...interface{})

ExpectNoErrorWithOffset checks if "err" is set, and if so, fails assertion while logging the error at "offset" levels above its caller (for example, for call chain f -> g -> ExpectNoErrorWithOffset(1, ...) error would be logged for "f").

func ExpectNoErrorWithRetries added in v1.4.2

func ExpectNoErrorWithRetries(fn func() error, maxRetries int, explain ...interface{})

func ExpectNodeHasLabel added in v1.4.2

func ExpectNodeHasLabel(c clientset.Interface, nodeName string, labelKey string, labelValue string)

func ExpectNodeHasTaint added in v1.4.2

func ExpectNodeHasTaint(c clientset.Interface, nodeName string, taint *v1.Taint)

func Failf

func Failf(format string, args ...interface{})

func FailfWithOffset added in v1.7.0

func FailfWithOffset(offset int, format string, args ...interface{})

FailfWithOffset calls "Fail" and logs the error at "offset" levels above its caller (for example, for call chain f -> g -> FailfWithOffset(1, ...) error would be logged for "f").

func FilterNodes

func FilterNodes(nodeList *v1.NodeList, fn func(node v1.Node) bool)

Filters nodes in NodeList in place, removing nodes that do not satisfy the given condition TODO: consider merging with pkg/client/cache.NodeLister

func FormatRuntimeOperationErrorRate

func FormatRuntimeOperationErrorRate(nodesResult map[string]NodeRuntimeOperationErrorRate) string

FormatRuntimeOperationErrorRate formats the runtime operation error rate to string.

func GatherCPUProfile added in v1.12.0

func GatherCPUProfile(componentName string, profileBaseName string, wg *sync.WaitGroup)

func GatherCPUProfileForSeconds added in v1.12.0

func GatherCPUProfileForSeconds(componentName string, profileBaseName string, seconds int, wg *sync.WaitGroup)

func GatherMemoryProfile added in v1.12.0

func GatherMemoryProfile(componentName string, profileBaseName string, wg *sync.WaitGroup)

func GenerateMasterRegexp added in v1.5.0

func GenerateMasterRegexp(prefix string) string

func GeneratePodSecurityContext added in v1.14.0

func GeneratePodSecurityContext(fsGroup *int64, seLinuxOptions *v1.SELinuxOptions) *v1.PodSecurityContext

GeneratePodSecurityContext generates the corresponding pod security context with the given inputs If the Node OS is windows, currently we will ignore the inputs and return nil. TODO: Will modify it after windows has its own security context

func GenerateReadFileCmd added in v1.14.0

func GenerateReadFileCmd(fullPath string) []string

GenerateReadFileCmd generates the corresponding command lines to read from a file with the given file path. Depending on the Node OS is Windows or linux, the command will use powershell or /bin/sh

func GenerateScriptCmd added in v1.14.0

func GenerateScriptCmd(command string) []string

GenerateScriptCmd generates the corresponding command lines to execute a command. Depending on the Node OS is Windows or linux, the command will use powershell or /bin/sh

func GenerateSecurityContext added in v1.14.0

func GenerateSecurityContext(privileged bool) *v1.SecurityContext

GenerateSecurityContext generates the corresponding container security context with the given inputs If the Node OS is windows, currently we will ignore the inputs and return nil. TODO: Will modify it after windows has its own security context

func GenerateWriteFileCmd added in v1.14.0

func GenerateWriteFileCmd(content, fullPath string) []string

GenerateWriteFileCmd generates the corresponding command lines to write a file with the given content and file path. Depending on the Node OS is Windows or linux, the command will use powershell or /bin/sh

func GenerateWriteandExecuteScriptFileCmd added in v1.14.0

func GenerateWriteandExecuteScriptFileCmd(content, fileName, filePath string) []string

GenerateWriteandExecuteScriptFileCmd generates the corresponding command lines to write a file with the given file path and also execute this file. Depending on the Node OS is Windows or linux, the command will use powershell or /bin/sh

func GetAllMasterAddresses added in v1.13.1

func GetAllMasterAddresses(c clientset.Interface) []string

GetAllMasterAddresses returns all IP addresses on which the kubelet can reach the master. It may return internal and external IPs, even if we expect for e.g. internal IPs to be used (issue #56787), so that we can be sure to block the master fully during tests.

func GetClusterZones added in v1.8.11

func GetClusterZones(c clientset.Interface) (sets.String, error)

func GetFileModeRegex added in v1.14.0

func GetFileModeRegex(filePath string, mask *int32) string

GetFileModeRegex returns a file mode related regex which should be matched by the mounttest pods' output. If the given mask is nil, then the regex will contain the default OS file modes, which are 0644 for Linux and 0775 for Windows.

func GetGPUDevicePluginImage added in v1.8.2

func GetGPUDevicePluginImage() string

func GetGroupNodes added in v1.7.0

func GetGroupNodes(group string) ([]string, error)

func GetHostExternalAddress

func GetHostExternalAddress(client clientset.Interface, p *v1.Pod) (externalAddress string, err error)

GetHostExternalAddress gets the node for a pod and returns the first External address. Returns an error if the node the pod is on doesn't have an External address.

func GetIngressPoint added in v1.6.0

func GetIngressPoint(ing *v1.LoadBalancerIngress) string

func GetJob added in v1.6.0

func GetJob(c clientset.Interface, ns, name string) (*batch.Job, error)

GetJob uses c to get the Job in namespace ns named name. If the returned error is nil, the returned Job is valid.

func GetJobPods added in v1.7.0

func GetJobPods(c clientset.Interface, ns, jobName string) (*v1.PodList, error)

GetJobPods returns a list of Pods belonging to a Job.

func GetKubeletHeapStats

func GetKubeletHeapStats(c clientset.Interface, nodeName string) (string, error)

func GetKubeletPods

func GetKubeletPods(c clientset.Interface, node string) (*v1.PodList, error)

GetKubeletPods retrieves the list of pods on the kubelet

func GetKubeletRunningPods

func GetKubeletRunningPods(c clientset.Interface, node string) (*v1.PodList, error)

GetKubeletRunningPods retrieves the list of running pods on the kubelet. The pods includes necessary information (e.g., UID, name, namespace for pods/containers), but do not contain the full spec.

func GetKubemarkMasterComponentsResourceUsage added in v1.6.0

func GetKubemarkMasterComponentsResourceUsage() map[string]*KubemarkResourceUsage

TODO: figure out how to move this to kubemark directory (need to factor test SSH out of e2e framework)

func GetLogToFileFunc added in v1.7.0

func GetLogToFileFunc(file *os.File) func(format string, args ...interface{})

GetLogToFileFunc is a convenience function that returns a function that have the same interface as Logf, but writes to a specified file.

func GetManagedInstanceGroupTemplateName added in v1.11.2

func GetManagedInstanceGroupTemplateName(zone string) (string, error)

func GetMasterAndWorkerNodesOrDie added in v1.4.2

func GetMasterAndWorkerNodesOrDie(c clientset.Interface) (sets.String, *v1.NodeList)

GetMasterAndWorkerNodesOrDie will return a list masters and schedulable worker nodes

func GetMasterHost

func GetMasterHost() string

func GetNodeAddresses added in v1.6.0

func GetNodeAddresses(node *v1.Node, addressType v1.NodeAddressType) (ips []string)

func GetNodeExternalIP added in v1.5.0

func GetNodeExternalIP(node *v1.Node) (string, error)

GetNodeExternalIP returns node external IP concatenated with port 22 for ssh e.g. 1.2.3.4:22

func GetNodeInternalIP added in v1.12.0

func GetNodeInternalIP(node *v1.Node) (string, error)

GetNodeInternalIP returns node internal IP

func GetNodePortURL

func GetNodePortURL(client clientset.Interface, ns, name string, svcPort int) (string, error)

GetNodePortURL returns the url to a nodeport Service.

func GetNodePublicIps added in v1.6.0

func GetNodePublicIps(c clientset.Interface) ([]string, error)

func GetNodeTTLAnnotationValue added in v1.8.0

func GetNodeTTLAnnotationValue(c clientset.Interface) (time.Duration, error)

func GetPodLogs

func GetPodLogs(c clientset.Interface, namespace, podName, containerName string) (string, error)

TODO(random-liu): Change this to be a member function of the framework.

func GetPodSecretUpdateTimeout added in v1.8.0

func GetPodSecretUpdateTimeout(c clientset.Interface) time.Duration

func GetPodsForDeployment added in v1.9.0

func GetPodsForDeployment(client clientset.Interface, deployment *apps.Deployment) (*v1.PodList, error)

GetPodsForDeployment gets pods for the given deployment

func GetPodsInNamespace

func GetPodsInNamespace(c clientset.Interface, ns string, ignoreLabels map[string]string) ([]*v1.Pod, error)

func GetPodsScheduled added in v1.4.2

func GetPodsScheduled(masterNodes sets.String, pods *v1.PodList) (scheduledPods, notScheduledPods []v1.Pod)

GetPodsScheduled returns a number of currently scheduled and not scheduled Pods.

func GetProviders added in v1.14.0

func GetProviders() []string

GetProviders returns the names of all currently registered providers.

func GetReadyNodesIncludingTaintedOrDie added in v1.11.2

func GetReadyNodesIncludingTaintedOrDie(c clientset.Interface) (nodes *v1.NodeList)

GetReadyNodesIncludingTaintedOrDie returns all ready nodes, even those which are tainted. There are cases when we care about tainted nodes E.g. in tests related to nodes with gpu we care about nodes despite presence of nvidia.com/gpu=present:NoSchedule taint

func GetReadySchedulableNodesOrDie

func GetReadySchedulableNodesOrDie(c clientset.Interface) (nodes *v1.NodeList)

GetReadySchedulableNodesOrDie addresses the common use case of getting nodes you can do work on. 1) Needs to be schedulable. 2) Needs to be ready. If EITHER 1 or 2 is not true, most tests will want to ignore the node entirely.

func GetServerArchitecture

func GetServerArchitecture(c clientset.Interface) string

GetServerArchitecture fetches the architecture of the cluster's apiserver.

func GetServiceLoadBalancerCreationTimeout added in v1.8.0

func GetServiceLoadBalancerCreationTimeout(cs clientset.Interface) time.Duration

func GetServicesProxyRequest

func GetServicesProxyRequest(c clientset.Interface, request *restclient.Request) (*restclient.Request, error)

func GetSigner

func GetSigner(provider string) (ssh.Signer, error)

GetSigner returns an ssh.Signer for the provider ("gce", etc.) that can be used to SSH to their nodes.

func GetStatsSummary added in v1.12.10

func GetStatsSummary(c clientset.Interface, nodeName string) (*stats.Summary, error)

GetStatsSummary contacts kubelet for the container information.

func GetTestImage added in v1.14.0

func GetTestImage(image string) string

GetTestImage returns the image name with the given input If the Node OS is windows, currently we return Nettest image for Windows node due to the issue of #https://github.com/kubernetes-sigs/windows-testing/pull/35.

func GroupSize added in v1.7.0

func GroupSize(group string) (int, error)

func HandleFlags added in v1.13.1

func HandleFlags()

HandleFlags sets up all flags and parses the command line.

func IngressUpgrade added in v1.10.8

func IngressUpgrade(isUpgrade bool) error

func InjectHtml added in v1.7.0

func InjectHtml(client clientset.Interface, config VolumeTestConfig, fsGroup *int64, volume v1.VolumeSource, content string)

InjectHtml insert index.html with given content into given volume. It does so by starting and auxiliary pod which writes the file there. The volume must be writable.

func IsNodeConditionSetAsExpected

func IsNodeConditionSetAsExpected(node *v1.Node, conditionType v1.NodeConditionType, wantTrue bool) bool

func IsNodeConditionSetAsExpectedSilent

func IsNodeConditionSetAsExpectedSilent(node *v1.Node, conditionType v1.NodeConditionType, wantTrue bool) bool

func IsNodeConditionUnset

func IsNodeConditionUnset(node *v1.Node, conditionType v1.NodeConditionType) bool

func IsPodSecurityPolicyEnabled added in v1.8.3

func IsPodSecurityPolicyEnabled(f *Framework) bool

func IsRBACEnabled added in v1.8.3

func IsRBACEnabled(f *Framework) bool

func IssueSSHCommand

func IssueSSHCommand(cmd, provider string, node *v1.Node) error

func JobFinishTime added in v1.12.0

func JobFinishTime(finishedJob *batch.Job) metav1.Time

func KubeDescribe

func KubeDescribe(text string, body func()) bool

Wrapper function for ginkgo describe. Adds namespacing. TODO: Support type safe tagging as well https://github.com/kubernetes/kubernetes/pull/22401.

func KubectlCmd

func KubectlCmd(args ...string) *exec.Cmd

KubectlCmd runs the kubectl executable through the wrapper script.

func KubectlVersion

func KubectlVersion() (*utilversion.Version, error)

KubectlVersion gets the version of kubectl that's currently being used (see --kubectl-path in e2e.go to use an alternate kubectl).

func KubectlVersionGTE

func KubectlVersionGTE(v *utilversion.Version) (bool, error)

KubectlVersionGTE returns true if the kubectl version is greater than or equal to v.

func LaunchHostExecPod

func LaunchHostExecPod(client clientset.Interface, ns, name string) *v1.Pod

LaunchHostExecPod launches a hostexec pod in the given namespace and waits until it's Running

func LaunchWebserverPod

func LaunchWebserverPod(f *Framework, podName, nodeName string) (ip string)

LaunchWebserverPod launches a pod serving http on port 8080 to act as the target for networking connectivity checks. The ip address of the created pod will be returned if the pod is launched successfully.

func ListNamespaceEvents added in v1.4.2

func ListNamespaceEvents(c clientset.Interface, ns string) error

func LoadClientset added in v1.5.0

func LoadClientset() (*clientset.Clientset, error)

func LoadConfig

func LoadConfig() (*restclient.Config, error)

func LoadInternalClientset added in v1.5.0

func LoadInternalClientset() (*internalclientset.Clientset, error)

func LogClusterImageSources added in v1.5.8

func LogClusterImageSources()

func LogContainersInPodsWithLabels

func LogContainersInPodsWithLabels(c clientset.Interface, ns string, match map[string]string, containerSubstr string, logFunc func(ftm string, args ...interface{}))

func LogFailedContainers

func LogFailedContainers(c clientset.Interface, ns string, logFunc func(ftm string, args ...interface{}))

func LogPodsWithLabels

func LogPodsWithLabels(c clientset.Interface, ns string, match map[string]string, logFunc func(ftm string, args ...interface{}))

func LogSSHResult

func LogSSHResult(result SSHResult)

func LogSuspiciousLatency

func LogSuspiciousLatency(latencyData []PodLatencyData, latencyDataLag []PodLatencyData, nodeCount int, c clientset.Interface)

LogSuspiciousLatency logs metrics/docker errors from all nodes that had slow startup times If latencyDataLag is nil then it will be populated from latencyData

func Logf

func Logf(format string, args ...interface{})

func LookForString

func LookForString(expectedString string, timeout time.Duration, fn func() string) (result string, err error)

Looks for the given string in the output of fn, repeatedly calling fn until the timeout is reached or the string is found. Returns last log and possibly error if the string was not found.

func LookForStringInFile

func LookForStringInFile(ns, podName, container, file, expectedString string, timeout time.Duration) (result string, err error)

Looks for the given string in a file in a specific pod container

func LookForStringInLog

func LookForStringInLog(ns, podName, container, expectedString string, timeout time.Duration) (result string, err error)

Looks for the given string in the log of a specific pod container

func LookForStringInPodExec

func LookForStringInPodExec(ns, podName string, command []string, expectedString string, timeout time.Duration) (result string, err error)

Looks for the given string in the output of a command executed in a specific pod container

func MakeDeployment added in v1.9.0

func MakeDeployment(replicas int32, podLabels map[string]string, nodeSelector map[string]string, namespace string, pvclaims []*v1.PersistentVolumeClaim, isPrivileged bool, command string) *apps.Deployment

MakeDeployment creates a deployment definition based on the namespace. The deployment references the PVC's name. A slice of BASH commands can be supplied as args to be run by the pod

func MakeNginxPod added in v1.11.2

func MakeNginxPod(ns string, nodeSelector map[string]string, pvclaims []*v1.PersistentVolumeClaim) *v1.Pod

Returns a pod definition based on the namespace using nginx image

func MakePersistentVolume added in v1.7.0

func MakePersistentVolume(pvConfig PersistentVolumeConfig) *v1.PersistentVolume

Returns a PV definition based on the nfs server IP. If the PVC is not nil then the PV is defined with a ClaimRef which includes the PVC's namespace. If the PVC is nil then the PV is not defined with a ClaimRef. If no reclaimPolicy is assigned, assumes "Retain". Specs are expected to match the test's PVC. Note: the passed-in claim does not have a name until it is created and thus the PV's

ClaimRef cannot be completely filled-in in this func. Therefore, the ClaimRef's name
is added later in CreatePVCPV.

func MakePersistentVolumeClaim added in v1.6.0

func MakePersistentVolumeClaim(cfg PersistentVolumeClaimConfig, ns string) *v1.PersistentVolumeClaim

Returns a PVC definition based on the namespace. Note: if this PVC is intended to be pre-bound to a PV, whose name is not

known until the PV is instantiated, then the func CreatePVPVC will add
pvc.Spec.VolumeName to this claim.

func MakePod added in v1.6.0

func MakePod(ns string, nodeSelector map[string]string, pvclaims []*v1.PersistentVolumeClaim, isPrivileged bool, command string) *v1.Pod

Returns a pod definition based on the namespace. The pod references the PVC's name. A slice of BASH commands can be supplied as args to be run by the pod

func MakeSecPod added in v1.8.0

func MakeSecPod(ns string, pvclaims []*v1.PersistentVolumeClaim, isPrivileged bool, command string, hostIPC bool, hostPID bool, seLinuxLabel *v1.SELinuxOptions, fsGroup *int64) *v1.Pod

Returns a pod definition based on the namespace. The pod references the PVC's name. A slice of BASH commands can be supplied as args to be run by the pod. SELinux testing requires to pass HostIPC and HostPID as booleansi arguments.

func MakeWritePod added in v1.6.0

func MakeWritePod(ns string, pvc *v1.PersistentVolumeClaim) *v1.Pod

Returns a pod definition based on the namespace. The pod references the PVC's name.

func MasterOSDistroIs added in v1.8.0

func MasterOSDistroIs(supportedMasterOsDistros ...string) bool

func MasterUpgrade

func MasterUpgrade(v string) error

func MasterUpgradeGCEWithKubeProxyDaemonSet added in v1.8.0

func MasterUpgradeGCEWithKubeProxyDaemonSet(v string, enableKubeProxyDaemonSet bool) error

TODO(mrhohn): Remove this function when kube-proxy is run as a DaemonSet by default.

func MigTemplate

func MigTemplate() (string, error)

MigTemplate (GCE-only) returns the name of the MIG template that the nodes of the cluster use.

func NVIDIADevicePlugin added in v1.8.2

func NVIDIADevicePlugin() *v1.Pod

NVIDIADevicePlugin returns the official Google Device Plugin pod for NVIDIA GPU in GKE

func NewDeployment added in v1.6.0

func NewDeployment(deploymentName string, replicas int32, podLabels map[string]string, imageName, image string, strategyType apps.DeploymentStrategyType) *apps.Deployment

func NewE2ETestNodePreparer added in v1.5.0

func NewE2ETestNodePreparer(client clientset.Interface, countToStrategy []testutils.CountToStrategy) testutils.TestNodePreparer

func NewExecPodSpec added in v1.14.0

func NewExecPodSpec(ns, name string, hostNetwork bool) *v1.Pod

NewExecPodSpec returns the pod spec of hostexec pod

func NewKubectlCommand

func NewKubectlCommand(args ...string) *kubectlBuilder

func NewReplicaSet added in v1.9.0

func NewReplicaSet(name, namespace string, replicas int32, podLabels map[string]string, imageName, image string) *apps.ReplicaSet

func NewStatefulSet added in v1.6.0

func NewStatefulSet(name, ns, governingSvcName string, replicas int32, statefulPodMounts []v1.VolumeMount, podMounts []v1.VolumeMount, labels map[string]string) *apps.StatefulSet

NewStatefulSet creates a new NGINX StatefulSet for testing. The StatefulSet is named name, is in namespace ns, statefulPodsMounts are the mounts that will be backed by PVs. podsMounts are the mounts that are mounted directly to the Pod. labels are the labels that will be usd for the StatefulSet selector.

func NewStatefulSetPVC added in v1.6.0

func NewStatefulSetPVC(name string) v1.PersistentVolumeClaim

NewStatefulSetPVC returns a PersistentVolumeClaim named name, for testing StatefulSets.

func NewStatefulSetScale added in v1.8.0

func NewStatefulSetScale(ss *apps.StatefulSet) *appsV1beta2.Scale

NewStatefulSetScale creates a new StatefulSet scale subresource and returns it

func NewTestJob added in v1.6.0

func NewTestJob(behavior, name string, rPol v1.RestartPolicy, parallelism, completions int32, activeDeadlineSeconds *int64, backoffLimit int32) *batch.Job

NewTestJob returns a Job which does one of several testing behaviors. notTerminate starts a Job that will run effectively forever. fail starts a Job that will fail immediately. succeed starts a Job that will succeed immediately. randomlySucceedOrFail starts a Job that will succeed or fail randomly. failOnce fails the Job the first time it is run and succeeds subsequently. name is the Name of the Job. RestartPolicy indicates the restart policy of the containers in which the Pod is running. Parallelism is the Job's parallelism, and completions is the Job's required number of completions.

func NodeAddresses

func NodeAddresses(nodelist *v1.NodeList, addrType v1.NodeAddressType) []string

NodeAddresses returns the first address of the given type of each node.

func NodeHasTaint added in v1.6.0

func NodeHasTaint(c clientset.Interface, nodeName string, taint *v1.Taint) (bool, error)

func NodeOSDistroIs added in v1.6.0

func NodeOSDistroIs(supportedNodeOsDistros ...string) bool

func NodeProxyRequest

func NodeProxyRequest(c clientset.Interface, node, endpoint string, port int) (restclient.Result, error)

NodeProxyRequest performs a get on a node proxy endpoint given the nodename and rest client.

func NodeSSHHosts

func NodeSSHHosts(c clientset.Interface) ([]string, error)

NodeSSHHosts returns SSH-able host names for all schedulable nodes - this excludes master node. If it can't find any external IPs, it falls back to looking for internal IPs. If it can't find an internal IP for every node it returns an error, though it still returns all hosts that it found in that case.

func NodeUpgrade

func NodeUpgrade(f *Framework, v string, img string) error

func NodeUpgradeGCEWithKubeProxyDaemonSet added in v1.8.0

func NodeUpgradeGCEWithKubeProxyDaemonSet(f *Framework, v string, img string, enableKubeProxyDaemonSet bool) error

TODO(mrhohn): Remove this function when kube-proxy is run as a DaemonSet by default.

func NumberOfNVIDIAGPUs added in v1.8.2

func NumberOfNVIDIAGPUs(node *v1.Node) int64

TODO make this generic and not linked to COS only NumberOfGPUs returs the number of GPUs advertised by a node This is based on the Device Plugin system and expected to run on a COS based node After the NVIDIA drivers were installed

func NumberOfReadyNodes added in v1.8.0

func NumberOfReadyNodes(c clientset.Interface) (int, error)

NumberOfReadyNodes returns number of ready Nodes excluding Master Node.

func NumberOfRegisteredNodes added in v1.8.12

func NumberOfRegisteredNodes(c clientset.Interface) (int, error)

NumberOfRegisteredNodes returns number of registered Nodes excluding Master Node.

func OpenWebSocketForURL

func OpenWebSocketForURL(url *url.URL, config *restclient.Config, protocols []string) (*websocket.Conn, error)

OpenWebSocketForURL constructs a websocket connection to the provided URL, using the client config, with the specified protocols.

func PVPVCCleanup added in v1.6.0

func PVPVCCleanup(c clientset.Interface, ns string, pv *v1.PersistentVolume, pvc *v1.PersistentVolumeClaim) []error

Clean up a pv and pvc in a single pv/pvc test case. Note: delete errors are appended to []error so that we can attempt to delete both the pvc and pv.

func PVPVCMapCleanup added in v1.6.0

func PVPVCMapCleanup(c clientset.Interface, ns string, pvols PVMap, claims PVCMap) []error

Clean up pvs and pvcs in multi-pv-pvc test cases. Entries found in the pv and claim maps are deleted as long as the Delete api call succeeds. Note: delete errors are appended to []error so that as many pvcs and pvs as possible are deleted.

func ParseKVLines

func ParseKVLines(output, key string) string

ParseKVLines parses output that looks like lines containing "<key>: <val>" and returns <val> if <key> is found. Otherwise, it returns the empty string.

func PickNodeIP added in v1.6.0

func PickNodeIP(c clientset.Interface) string

func PodProxyResponseChecker

func PodProxyResponseChecker(c clientset.Interface, ns string, label labels.Selector, controllerName string, respondName bool, pods *v1.PodList) podProxyResponseChecker

func PodStartupLatencyToPerfData added in v1.7.0

func PodStartupLatencyToPerfData(latency *PodStartupLatency) *perftype.PerfData

PodStartupLatencyToPerfData transforms PodStartupLatency to PerfData.

func PodsCreated

func PodsCreated(c clientset.Interface, ns, name string, replicas int32) (*v1.PodList, error)

func PodsCreatedByLabel added in v1.5.0

func PodsCreatedByLabel(c clientset.Interface, ns, name string, replicas int32, label labels.Selector) (*v1.PodList, error)

func PodsResponding

func PodsResponding(c clientset.Interface, ns, name string, wantName bool, pods *v1.PodList) error

func PollURL added in v1.6.0

func PollURL(route, host string, timeout time.Duration, interval time.Duration, httpClient *http.Client, expectUnreachable bool) error

PollURL polls till the url responds with a healthy http code. If expectUnreachable is true, it breaks on first non-healthy http code instead.

func PrettyPrint added in v1.13.1

func PrettyPrint(item interface{}) string

PrettyPrint returns a human-readable representation of an item.

func PrettyPrintJSON

func PrettyPrintJSON(metrics interface{}) string

func PrintAllKubeletPods

func PrintAllKubeletPods(c clientset.Interface, nodeName string)

func PrintLatencies

func PrintLatencies(latencies []PodLatencyData, header string)

func PrintPerfData

func PrintPerfData(p *perftype.PerfData)

PrintPerfData prints the perfdata in json format with PerfResultTag prefix. If an error occurs, nothing will be printed.

func PrintSummaries added in v1.7.0

func PrintSummaries(summaries []TestDataSummary, testBaseName string)

func PrivilegedPSP added in v1.8.3

func PrivilegedPSP(name string) *policy.PodSecurityPolicy

Creates a PodSecurityPolicy that allows everything.

func ProviderIs

func ProviderIs(providers ...string) bool

func ProxyMode added in v1.7.0

func ProxyMode(f *Framework) (string, error)

func RandomSuffix added in v1.14.0

func RandomSuffix() string

randomSuffix provides a random string to append to pods,services,rcs. TODO: Allow service names to have the same form as names

for pods and replication controllers so we don't
need to use such a function and can instead
use the UUID utility function.

func RcByNameContainer added in v1.6.0

func RcByNameContainer(name string, replicas int32, image string, labels map[string]string, c v1.Container,
	gracePeriod *int64) *v1.ReplicationController

RcByNameContainer returns a ReplicationController with specified name and container

func RcByNamePort added in v1.6.0

func RcByNamePort(name string, replicas int32, image string, port int, protocol v1.Protocol,
	labels map[string]string, gracePeriod *int64) *v1.ReplicationController

RcByNamePort returns a ReplicationController with specified name and port

func RealVersion added in v1.6.0

func RealVersion(s string) (string, error)

RealVersion turns a version constants into a version string deployable on GKE. See hack/get-build.sh for more information.

func RegisterClusterFlags added in v1.4.2

func RegisterClusterFlags()

Register flags specific to the cluster e2e test suite.

func RegisterCommonFlags added in v1.4.2

func RegisterCommonFlags()

Register flags common to all e2e test suites.

func RegisterNodeFlags added in v1.4.2

func RegisterNodeFlags()

Register flags specific to the node e2e test suite.

func RegisterProvider added in v1.13.1

func RegisterProvider(name string, factory Factory)

RegisterProvider is expected to be called during application init, typically by an init function in a provider package.

func RemoveAvoidPodsOffNode added in v1.7.0

func RemoveAvoidPodsOffNode(c clientset.Interface, nodeName string)

RemoveAnnotationOffNode removes AvoidPods annotations from the node. It does not fail if no such annotation exists.

func RemoveCleanupAction

func RemoveCleanupAction(p CleanupActionHandle)

RemoveCleanupAction removes a function that was installed by AddCleanupAction.

func RemoveLabelOffNode added in v1.4.2

func RemoveLabelOffNode(c clientset.Interface, nodeName string, labelKey string)

RemoveLabelOffNode is for cleaning up labels temporarily added to node, won't fail if target label doesn't exist or has been removed.

func RemoveTaintOffNode added in v1.4.2

func RemoveTaintOffNode(c clientset.Interface, nodeName string, taint v1.Taint)

func ResetMetrics

func ResetMetrics(c clientset.Interface) error

Resets latency metrics in apiserver.

func ResetSchedulerMetrics added in v1.11.2

func ResetSchedulerMetrics(c clientset.Interface) error

func ResizeGroup added in v1.7.0

func ResizeGroup(group string, size int32) error

func ResourceUsageToPerfData

func ResourceUsageToPerfData(usagePerNode ResourceUsagePerNode) *perftype.PerfData

ResourceUsageToPerfData transforms ResourceUsagePerNode to PerfData. Notice that this function only cares about memory usage, because cpu usage information will be extracted from NodesCPUSummary.

func ResourceUsageToPerfDataWithLabels added in v1.4.2

func ResourceUsageToPerfDataWithLabels(usagePerNode ResourceUsagePerNode, labels map[string]string) *perftype.PerfData

ResourceUsageToPerfDataWithLabels transforms ResourceUsagePerNode to PerfData with additional labels. Notice that this function only cares about memory usage, because cpu usage information will be extracted from NodesCPUSummary.

func RestartApiserver

func RestartApiserver(cs clientset.Interface) error

func RestartControllerManager added in v1.8.0

func RestartControllerManager() error

func RestartKubeProxy

func RestartKubeProxy(host string) error

func RestartKubelet added in v1.8.0

func RestartKubelet(host string) error

func RestclientConfig added in v1.6.0

func RestclientConfig(kubeContext string) (*clientcmdapi.Config, error)

func RunCleanupActions

func RunCleanupActions()

RunCleanupActions runs all functions installed by AddCleanupAction. It does not remove them (see RemoveCleanupAction) but it does run unlocked, so they may remove themselves.

func RunCmd

func RunCmd(command string, args ...string) (string, string, error)

RunCmd runs cmd using args and returns its stdout and stderr. It also outputs cmd's stdout and stderr to their respective OS streams.

func RunCmdEnv added in v1.5.5

func RunCmdEnv(env []string, command string, args ...string) (string, string, error)

RunCmdEnv runs cmd with the provided environment and args and returns its stdout and stderr. It also outputs cmd's stdout and stderr to their respective OS streams.

func RunDeployment

func RunDeployment(config testutils.DeploymentConfig) error

func RunHostCmd

func RunHostCmd(ns, name, cmd string) (string, error)

RunHostCmd runs the given cmd in the context of the given pod using `kubectl exec` inside of a shell.

func RunHostCmdOrDie

func RunHostCmdOrDie(ns, name, cmd string) string

RunHostCmdOrDie calls RunHostCmd and dies on error.

func RunHostCmdWithRetries added in v1.7.8

func RunHostCmdWithRetries(ns, name, cmd string, interval, timeout time.Duration) (string, error)

RunHostCmdWithRetries calls RunHostCmd and retries all errors until it succeeds or the specified timeout expires. This can be used with idempotent commands to deflake transient Node issues.

func RunIfContainerRuntimeIs added in v1.6.8

func RunIfContainerRuntimeIs(runtimes ...string)

func RunIfSystemSpecNameIs added in v1.6.8

func RunIfSystemSpecNameIs(names ...string)

func RunKubectl

func RunKubectl(args ...string) (string, error)

RunKubectl is a convenience wrapper over kubectlBuilder

func RunKubectlInput added in v1.14.0

func RunKubectlInput(data string, args ...string) (string, error)

RunKubectlInput is a convenience wrapper over kubectlBuilder that takes input to stdin

func RunKubectlOrDie

func RunKubectlOrDie(args ...string) string

RunKubectlOrDie is a convenience wrapper over kubectlBuilder

func RunKubectlOrDieInput

func RunKubectlOrDieInput(data string, args ...string) string

RunKubectlOrDieInput is a convenience wrapper over kubectlBuilder that takes input to stdin

func RunKubemciCmd added in v1.11.2

func RunKubemciCmd(args ...string) (string, error)

RunKubemciCmd is a convenience wrapper over kubectlBuilder to run kubemci. It assumes that kubemci exists in PATH.

func RunKubemciWithKubeconfig added in v1.11.2

func RunKubemciWithKubeconfig(args ...string) (string, error)

RunKubemciWithKubeconfig is a convenience wrapper over RunKubemciCmd

func RunRC

func RunRC(config testutils.RCConfig) error

func RunReplicaSet

func RunReplicaSet(config testutils.ReplicaSetConfig) error

func RunSSHCommandViaBastion added in v1.14.0

func RunSSHCommandViaBastion(cmd, user, bastion, host string, signer ssh.Signer) (string, string, int, error)

RunSSHCommandViaBastion returns the stdout, stderr, and exit code from running cmd on host as specific user, along with any SSH-level error. It uses an SSH proxy to connect to bastion, then via that tunnel connects to the remote host. Similar to sshutil.RunSSHCommand but scoped to the needs of the test infrastructure.

func ScaleDeployment added in v1.5.0

func ScaleDeployment(clientset clientset.Interface, scalesGetter scaleclient.ScalesGetter, ns, name string, size uint, wait bool) error

func ScaleRC

func ScaleRC(clientset clientset.Interface, scalesGetter scaleclient.ScalesGetter, ns, name string, size uint, wait bool) error

func ScaleRCByLabels

func ScaleRCByLabels(clientset clientset.Interface, scalesGetter scaleclient.ScalesGetter, ns string, l map[string]string, replicas uint) error

ScaleRCByLabels scales an RC via ns/label lookup. If replicas == 0 it waits till none are running, otherwise it does what a synchronous scale operation would do.

func ScaleResource added in v1.6.0

func ScaleResource(
	clientset clientset.Interface,
	scalesGetter scaleclient.ScalesGetter,
	ns, name string,
	size uint,
	wait bool,
	kind schema.GroupKind,
	gr schema.GroupResource,
) error

func ServerVersionGTE

func ServerVersionGTE(v *utilversion.Version, c discovery.ServerVersionInterface) (bool, error)

ServerVersionGTE returns true if v is greater than or equal to the server version.

TODO(18726): This should be incorporated into client.VersionInterface.

func ServiceResponding

func ServiceResponding(c clientset.Interface, ns, name string) error

func SimpleGET added in v1.6.0

func SimpleGET(c *http.Client, url, host string) (string, error)

SimpleGET executes a get on the given url, returns error if non-200 returned.

func SkipIfContainerRuntimeIs added in v1.4.2

func SkipIfContainerRuntimeIs(runtimes ...string)

func SkipIfMissingResource added in v1.4.2

func SkipIfMissingResource(dynamicClient dynamic.Interface, gvr schema.GroupVersionResource, namespace string)

func SkipIfMultizone added in v1.8.11

func SkipIfMultizone(c clientset.Interface)

func SkipIfProviderIs

func SkipIfProviderIs(unsupportedProviders ...string)

func SkipUnlessAtLeast

func SkipUnlessAtLeast(value int, minValue int, message string)

func SkipUnlessClusterMonitoringModeIs added in v1.9.0

func SkipUnlessClusterMonitoringModeIs(supportedMonitoring ...string)

func SkipUnlessKubectlVersionGTE added in v1.3.10

func SkipUnlessKubectlVersionGTE(v *utilversion.Version)

func SkipUnlessLocalEphemeralStorageEnabled added in v1.9.0

func SkipUnlessLocalEphemeralStorageEnabled()

func SkipUnlessMasterOSDistroIs added in v1.8.0

func SkipUnlessMasterOSDistroIs(supportedMasterOsDistros ...string)

func SkipUnlessMultizone added in v1.10.8

func SkipUnlessMultizone(c clientset.Interface)

func SkipUnlessNodeCountIsAtLeast

func SkipUnlessNodeCountIsAtLeast(minNodeCount int)

func SkipUnlessNodeCountIsAtMost added in v1.6.0

func SkipUnlessNodeCountIsAtMost(maxNodeCount int)

func SkipUnlessNodeOSDistroIs added in v1.6.0

func SkipUnlessNodeOSDistroIs(supportedNodeOsDistros ...string)

func SkipUnlessPrometheusMonitoringIsEnabled added in v1.11.2

func SkipUnlessPrometheusMonitoringIsEnabled(supportedMonitoring ...string)

func SkipUnlessProviderIs

func SkipUnlessProviderIs(supportedProviders ...string)

func SkipUnlessSSHKeyPresent added in v1.6.4

func SkipUnlessSSHKeyPresent()

func SkipUnlessSecretExistsAfterWait added in v1.11.2

func SkipUnlessSecretExistsAfterWait(c clientset.Interface, name, namespace string, timeout time.Duration)

func SkipUnlessTaintBasedEvictionsEnabled added in v1.13.1

func SkipUnlessTaintBasedEvictionsEnabled()

func Skipf

func Skipf(format string, args ...interface{})

func StartCPUProfileGatherer added in v1.12.0

func StartCPUProfileGatherer(componentName string, profileBaseName string, interval time.Duration) chan struct{}

StartCPUProfileGatherer performs polling-based gathering of the component's CPU profile. It takes the interval b/w consecutive gatherings as an argument and starts the gathering goroutine. To stop the gatherer, close the returned channel.

func StartCmdAndStreamOutput

func StartCmdAndStreamOutput(cmd *exec.Cmd) (stdout, stderr io.ReadCloser, err error)

func StartServeHostnameService added in v1.6.0

func StartServeHostnameService(c clientset.Interface, internalClient internalclientset.Interface, svc *v1.Service, ns string, replicas int) ([]string, string, error)

StartServeHostnameService creates a replication controller that serves its hostname and a service on top of it.

func StartVolumeServer added in v1.7.0

func StartVolumeServer(client clientset.Interface, config VolumeTestConfig) *v1.Pod

Starts a container specified by config.serverImage and exports all config.serverPorts from it. The returned pod should be used to get the server IP address and create appropriate VolumeSource.

func StopServeHostnameService added in v1.6.0

func StopServeHostnameService(clientset clientset.Interface, ns, name string) error

func TargetContainers

func TargetContainers() []string

A list of containers for which we want to collect resource usage.

func TestHitNodesFromOutside added in v1.6.0

func TestHitNodesFromOutside(externalIP string, httpPort int32, timeout time.Duration, expectedHosts sets.String) error

func TestHitNodesFromOutsideWithCount added in v1.6.0

func TestHitNodesFromOutsideWithCount(externalIP string, httpPort int32, timeout time.Duration, expectedHosts sets.String,
	countToSucceed int) error

func TestUnderTemporaryNetworkFailure added in v1.7.0

func TestUnderTemporaryNetworkFailure(c clientset.Interface, ns string, node *v1.Node, testFunc func())

Blocks outgoing network traffic on 'node'. Then runs testFunc and returns its status. At the end (even in case of errors), the network traffic is brought back to normal. This function executes commands on a node so it will work only for some environments.

func TestVolumeClient added in v1.7.0

func TestVolumeClient(client clientset.Interface, config VolumeTestConfig, fsGroup *int64, fsType string, tests []VolumeTest)

TestVolumeClient start a client pod using given VolumeSource (exported by startVolumeServer()) and check that the pod sees expected data, e.g. from the server pod. Multiple VolumeTests can be specified to mount multiple volumes to a single pod.

func TryKill

func TryKill(cmd *exec.Cmd)

Rough equivalent of ctrl+c for cleaning up processes. Intended to be run in defer.

func UnblockNetwork

func UnblockNetwork(from string, to string)

func UpdateDaemonSetWithRetries added in v1.7.0

func UpdateDaemonSetWithRetries(c clientset.Interface, namespace, name string, applyUpdate updateDSFunc) (ds *apps.DaemonSet, err error)

func UpdateDeploymentWithRetries

func UpdateDeploymentWithRetries(c clientset.Interface, namespace, name string, applyUpdate testutils.UpdateDeploymentFunc) (*apps.Deployment, error)

func UpdateJob added in v1.6.0

func UpdateJob(c clientset.Interface, ns string, job *batch.Job) (*batch.Job, error)

UpdateJob uses c to updated job in namespace ns. If the returned error is nil, the returned Job is valid and has been updated.

func UpdateJobFunc added in v1.7.0

func UpdateJobFunc(c clientset.Interface, ns, name string, updateFn func(job *batch.Job))

UpdateJobFunc updates the job object. It retries if there is a conflict, throw out error if there is any other errors. name is the job name, updateFn is the function updating the job object.

func UpdateJobWithRetries added in v1.5.0

func UpdateJobWithRetries(c clientset.Interface, namespace, name string, applyUpdate updateJobFunc) (job *batch.Job, err error)

func UpdatePodWithRetries

func UpdatePodWithRetries(client clientset.Interface, ns, name string, update func(*v1.Pod)) (*v1.Pod, error)

func UpdateReplicaSetWithRetries added in v1.5.0

func UpdateReplicaSetWithRetries(c clientset.Interface, namespace, name string, applyUpdate testutils.UpdateReplicaSetFunc) (*apps.ReplicaSet, error)

func UpdateReplicationControllerWithRetries added in v1.5.0

func UpdateReplicationControllerWithRetries(c clientset.Interface, namespace, name string, applyUpdate updateRcFunc) (*v1.ReplicationController, error)

func UpdateService added in v1.6.0

func UpdateService(c clientset.Interface, namespace, serviceName string, update func(*v1.Service)) (*v1.Service, error)

UpdateService fetches a service, calls the update function on it, and then attempts to send the updated service. It retries up to 2 times in the face of timeouts and conflicts.

func UpdateStatefulSetWithRetries added in v1.5.0

func UpdateStatefulSetWithRetries(c clientset.Interface, namespace, name string, applyUpdate updateStatefulSetFunc) (statefulSet *apps.StatefulSet, err error)

func ValidateController

func ValidateController(c clientset.Interface, containerImage string, replicas int, containername string, testname string, validator validatorFn, ns string)

ValidateController is a generic mechanism for testing RC's that are running. It takes a container name, a test name, and a validator function which is plugged in by a specific test. "containername": this is grepped for. "containerImage" : this is the name of the image we expect to be launched. Not to confuse w/ images (kitten.jpg) which are validated. "testname": which gets bubbled up to the logging/failure messages if errors happen. "validator" function: This function is given a podID and a client, and it can do some specific validations that way.

func ValidateEndpointsOrFail added in v1.6.0

func ValidateEndpointsOrFail(c clientset.Interface, namespace, serviceName string, expectedEndpoints PortsByPodName)

func VerifyLatencyWithinThreshold added in v1.11.2

func VerifyLatencyWithinThreshold(threshold, actual LatencyMetric, metricName string) error

Verifies whether 50, 90 and 99th percentiles of a latency metric are within the expected threshold.

func VerifyPods

func VerifyPods(c clientset.Interface, ns, name string, wantName bool, replicas int32) error

func VerifyPodsRunning added in v1.6.0

func VerifyPodsRunning(c clientset.Interface, ns, name string, wantName bool, replicas int32) error

func VerifyServeHostnameServiceDown added in v1.6.0

func VerifyServeHostnameServiceDown(c clientset.Interface, host string, serviceIP string, servicePort int) error

func VerifyServeHostnameServiceUp added in v1.6.0

func VerifyServeHostnameServiceUp(c clientset.Interface, ns, host string, expectedPods []string, serviceIP string, servicePort int) error

VerifyServeHostnameServiceUp wgets the given serviceIP:servicePort from the given host and from within a pod. The host is expected to be an SSH-able node in the cluster. Each pod in the service is expected to echo its name. These names are compared with the given expectedPods list after a sort | uniq.

func VerifyThatTaintIsGone added in v1.6.0

func VerifyThatTaintIsGone(c clientset.Interface, nodeName string, taint *v1.Taint)

func VolumeTestCleanup added in v1.7.0

func VolumeTestCleanup(f *Framework, config VolumeTestConfig)

Clean both server and client pods.

func WaitAndVerifyBinds added in v1.6.0

func WaitAndVerifyBinds(c clientset.Interface, ns string, pvols PVMap, claims PVCMap, testExpected bool) error

Search for bound PVs and PVCs by examining pvols for non-nil claimRefs. NOTE: Each iteration waits for a maximum of 3 minutes per PV and, if the PV is bound,

up to 3 minutes for the PVC. When the number of PVs != number of PVCs, this can lead
to situations where the maximum wait times are reached several times in succession,
extending test time. Thus, it is recommended to keep the delta between PVs and PVCs
small.

func WaitForAllJobPodsGone added in v1.12.0

func WaitForAllJobPodsGone(c clientset.Interface, ns, jobName string) error

WaitForAllJobPodsRunning wait for all pods for the Job named jobName in namespace ns to be deleted.

func WaitForAllJobPodsRunning added in v1.6.0

func WaitForAllJobPodsRunning(c clientset.Interface, ns, jobName string, parallelism int32) error

WaitForAllJobPodsRunning wait for all pods for the Job named JobName in namespace ns to become Running. Only use when pods will run for a long time, or it will be racy.

func WaitForAllNodesHealthy added in v1.4.2

func WaitForAllNodesHealthy(c clientset.Interface, timeout time.Duration) error

checks whether all registered nodes are ready and all required Pods are running on them.

func WaitForAllNodesSchedulable

func WaitForAllNodesSchedulable(c clientset.Interface, timeout time.Duration) error

WaitForAllNodesSchedulable waits up to timeout for all (but TestContext.AllowedNotReadyNodes) to become scheduable.

func WaitForApiserverUp

func WaitForApiserverUp(c clientset.Interface) error

func WaitForAuthorizationUpdate added in v1.6.0

func WaitForAuthorizationUpdate(c v1beta1authorization.SubjectAccessReviewsGetter, user, namespace, verb string, resource schema.GroupResource, allowed bool) error

WaitForAuthorizationUpdate checks if the given user can perform the named verb and action. If policyCachePollTimeout is reached without the expected condition matching, an error is returned

func WaitForControlledPods added in v1.9.0

func WaitForControlledPods(c clientset.Interface, ns, name string, kind schema.GroupKind) (pods *v1.PodList, err error)

Wait up to PodListTimeout for getting pods of the specified controller name and return them.

func WaitForControlledPodsRunning added in v1.6.0

func WaitForControlledPodsRunning(c clientset.Interface, ns, name string, kind schema.GroupKind) error

Wait up to 10 minutes for pods to become Running.

func WaitForControllerManagerUp added in v1.8.0

func WaitForControllerManagerUp() error

func WaitForDaemonSets added in v1.12.0

func WaitForDaemonSets(c clientset.Interface, ns string, allowedNotReadyNodes int32, timeout time.Duration) error

WaitForDaemonSets for all daemonsets in the given namespace to be ready (defined as all but 'allowedNotReadyNodes' pods associated with that daemonset are ready).

func WaitForDefaultServiceAccountInNamespace

func WaitForDefaultServiceAccountInNamespace(c clientset.Interface, namespace string) error

WaitForDefaultServiceAccountInNamespace waits for the default service account to be provisioned the default service account is what is associated with pods when they do not specify a service account as a result, pods are not able to be provisioned in a namespace until the service account is provisioned

func WaitForDeploymentComplete added in v1.9.0

func WaitForDeploymentComplete(c clientset.Interface, d *apps.Deployment) error

Waits for the deployment to complete, and don't check if rolling update strategy is broken. Rolling update strategy is used only during a rolling update, and can be violated in other situations, such as shortly after a scaling event or the deployment is just created.

func WaitForDeploymentCompleteAndCheckRolling added in v1.9.0

func WaitForDeploymentCompleteAndCheckRolling(c clientset.Interface, d *apps.Deployment) error

Waits for the deployment to complete, and check rolling update strategy isn't broken at any times. Rolling update strategy should not be broken during a rolling update.

func WaitForDeploymentOldRSsNum

func WaitForDeploymentOldRSsNum(c clientset.Interface, ns, deploymentName string, desiredRSNum int) error

Waits for the deployment to clean up old rcs.

func WaitForDeploymentRevision added in v1.9.0

func WaitForDeploymentRevision(c clientset.Interface, d *apps.Deployment, targetRevision string) error

func WaitForDeploymentRevisionAndImage

func WaitForDeploymentRevisionAndImage(c clientset.Interface, ns, deploymentName string, revision, image string) error

WaitForDeploymentRevisionAndImage waits for the deployment's and its new RS's revision and container image to match the given revision and image. Note that deployment revision and its new RS revision should be updated shortly most of the time, but an overwhelmed RS controller may result in taking longer to relabel a RS.

func WaitForDeploymentRollbackCleared

func WaitForDeploymentRollbackCleared(c clientset.Interface, ns, deploymentName string) error

WaitForDeploymentRollbackCleared waits for given deployment either started rolling back or doesn't need to rollback. Note that rollback should be cleared shortly, so we only wait for 1 minute here to fail early.

func WaitForDeploymentUpdatedReplicasGTE added in v1.10.8

func WaitForDeploymentUpdatedReplicasGTE(c clientset.Interface, ns, deploymentName string, minUpdatedReplicas int32, desiredGeneration int64) error

WaitForDeploymentUpdatedReplicasGTE waits for given deployment to be observed by the controller and has at least a number of updatedReplicas

func WaitForDeploymentWithCondition added in v1.5.0

func WaitForDeploymentWithCondition(c clientset.Interface, ns, deploymentName, reason string, condType apps.DeploymentConditionType) error

func WaitForEndpoint

func WaitForEndpoint(c clientset.Interface, ns, name string) error

func WaitForEvents

func WaitForEvents(c clientset.Interface, ns string, objOrRef runtime.Object, desiredEventsCount int) error

Waits for the number of events on the given object to reach a desired count.

func WaitForGroupSize added in v1.7.0

func WaitForGroupSize(group string, size int32) error

func WaitForJobComplete added in v1.12.0

func WaitForJobComplete(c clientset.Interface, ns, jobName string, completions int32) error

WaitForJobComplete uses c to wait for completions to complete for the Job jobName in namespace ns.

func WaitForJobDeleting added in v1.12.0

func WaitForJobDeleting(c clientset.Interface, ns, jobName string) error

WaitForJobDeleting uses c to wait for the Job jobName in namespace ns to have a non-nil deletionTimestamp (i.e. being deleted).

func WaitForJobFailure added in v1.6.0

func WaitForJobFailure(c clientset.Interface, ns, jobName string, timeout time.Duration, reason string) error

WaitForJobFailure uses c to wait for up to timeout for the Job named jobName in namespace ns to fail.

func WaitForJobFinish added in v1.6.0

func WaitForJobFinish(c clientset.Interface, ns, jobName string) error

WaitForJobFinish uses c to wait for the Job jobName in namespace ns to finish (either Failed or Complete).

func WaitForJobGone added in v1.10.8

func WaitForJobGone(c clientset.Interface, ns, jobName string, timeout time.Duration) error

WaitForJobGone uses c to wait for up to timeout for the Job named jobName in namespace ns to be removed.

func WaitForKubeletUp added in v1.8.0

func WaitForKubeletUp(host string) error

func WaitForMasters added in v1.5.0

func WaitForMasters(masterPrefix string, c clientset.Interface, size int, timeout time.Duration) error

waitForMasters waits until the cluster has the desired number of ready masters in it.

func WaitForMatchPodsCondition

func WaitForMatchPodsCondition(c clientset.Interface, opts metav1.ListOptions, desc string, timeout time.Duration, condition podCondition) error

WaitForMatchPodsCondition finds match pods based on the input ListOptions. waits and checks if all match pods are in the given podCondition

func WaitForNamedAuthorizationUpdate added in v1.8.3

func WaitForNamedAuthorizationUpdate(c v1beta1authorization.SubjectAccessReviewsGetter, user, namespace, verb, resourceName string, resource schema.GroupResource, allowed bool) error

WaitForAuthorizationUpdate checks if the given user can perform the named verb and action on the named resource. If policyCachePollTimeout is reached without the expected condition matching, an error is returned

func WaitForNamespacesDeleted

func WaitForNamespacesDeleted(c clientset.Interface, namespaces []string, timeout time.Duration) error

func WaitForNodeHasTaintOrNot added in v1.13.1

func WaitForNodeHasTaintOrNot(c clientset.Interface, nodeName string, taint *v1.Taint, wantTrue bool, timeout time.Duration) error

WaitForNodeHasTaintOrNot waits for a taint to be added/removed from the node until timeout occurs, whichever comes first.

func WaitForNodeToBe

func WaitForNodeToBe(c clientset.Interface, name string, conditionType v1.NodeConditionType, wantTrue bool, timeout time.Duration) bool

WaitForNodeToBe returns whether node "name's" condition state matches wantTrue within timeout. If wantTrue is true, it will ensure the node condition status is ConditionTrue; if it's false, it ensures the node condition is in any state other than ConditionTrue (e.g. not true or unknown).

func WaitForNodeToBeNotReady

func WaitForNodeToBeNotReady(c clientset.Interface, name string, timeout time.Duration) bool

WaitForNodeToBeNotReady returns whether node name is not ready (i.e. the readiness condition is anything but ready, e.g false or unknown) within timeout.

func WaitForNodeToBeReady

func WaitForNodeToBeReady(c clientset.Interface, name string, timeout time.Duration) bool

WaitForNodeToBeReady returns whether node name is ready within timeout.

func WaitForObservedDeployment

func WaitForObservedDeployment(c clientset.Interface, ns, deploymentName string, desiredGeneration int64) error

func WaitForPVClaimBoundPhase added in v1.7.0

func WaitForPVClaimBoundPhase(client clientset.Interface, pvclaims []*v1.PersistentVolumeClaim, timeout time.Duration) ([]*v1.PersistentVolume, error)

wait until all pvcs phase set to bound

func WaitForPartialEvents

func WaitForPartialEvents(c clientset.Interface, ns string, objOrRef runtime.Object, atLeastEventsCount int) error

Waits for the number of events on the given object to be at least a desired count.

func WaitForPersistentVolumeClaimDeleted added in v1.10.8

func WaitForPersistentVolumeClaimDeleted(c clientset.Interface, ns string, pvcName string, Poll, timeout time.Duration) error

WaitForPersistentVolumeClaimDeleted waits for a PersistentVolumeClaim to be removed from the system until timeout occurs, whichever comes first.

func WaitForPersistentVolumeClaimPhase

func WaitForPersistentVolumeClaimPhase(phase v1.PersistentVolumeClaimPhase, c clientset.Interface, ns string, pvcName string, Poll, timeout time.Duration) error

WaitForPersistentVolumeClaimPhase waits for a PersistentVolumeClaim to be in a specific phase or until timeout occurs, whichever comes first.

func WaitForPersistentVolumeClaimsPhase added in v1.13.1

func WaitForPersistentVolumeClaimsPhase(phase v1.PersistentVolumeClaimPhase, c clientset.Interface, ns string, pvcNames []string, Poll, timeout time.Duration, matchAny bool) error

WaitForPersistentVolumeClaimPhase waits for any (if matchAny is true) or all (if matchAny is false) PersistentVolumeClaims to be in a specific phase or until timeout occurs, whichever comes first.

func WaitForPersistentVolumeDeleted

func WaitForPersistentVolumeDeleted(c clientset.Interface, pvName string, Poll, timeout time.Duration) error

WaitForPersistentVolumeDeleted waits for a PersistentVolume to get deleted or until timeout occurs, whichever comes first.

func WaitForPersistentVolumePhase

func WaitForPersistentVolumePhase(phase v1.PersistentVolumePhase, c clientset.Interface, pvName string, Poll, timeout time.Duration) error

WaitForPersistentVolumePhase waits for a PersistentVolume to be in a specific phase or until timeout occurs, whichever comes first.

func WaitForPodCondition added in v1.6.0

func WaitForPodCondition(c clientset.Interface, ns, podName, desc string, timeout time.Duration, condition podCondition) error

func WaitForPodNameRunningInNamespace added in v1.4.2

func WaitForPodNameRunningInNamespace(c clientset.Interface, podName, namespace string) error

Waits default amount of time (PodStartTimeout) for the specified pod to become running. Returns an error if timeout occurs first, or pod goes in to failed state.

func WaitForPodNameUnschedulableInNamespace added in v1.10.8

func WaitForPodNameUnschedulableInNamespace(c clientset.Interface, podName, namespace string) error

WaitForPodNameUnschedulableInNamespace returns an error if it takes too long for the pod to become Pending and have condition Status equal to Unschedulable, if the pod Get api returns an error (IsNotFound or other), or if the pod failed with an unexpected reason. Typically called to test that the passed-in pod is Pending and Unschedulable.

func WaitForPodNoLongerRunningInNamespace

func WaitForPodNoLongerRunningInNamespace(c clientset.Interface, podName, namespace string) error

Waits default amount of time (DefaultPodDeletionTimeout) for the specified pod to stop running. Returns an error if timeout occurs first.

func WaitForPodNotPending

func WaitForPodNotPending(c clientset.Interface, ns, podName string) error

WaitForPodNotPending returns an error if it took too long for the pod to go out of pending state. The resourceVersion is used when Watching object changes, it tells since when we care about changes to the pod.

func WaitForPodRunningInNamespace

func WaitForPodRunningInNamespace(c clientset.Interface, pod *v1.Pod) error

Waits default amount of time (PodStartTimeout) for the specified pod to become running. Returns an error if timeout occurs first, or pod goes in to failed state.

func WaitForPodSuccessInNamespace

func WaitForPodSuccessInNamespace(c clientset.Interface, podName string, namespace string) error

WaitForPodSuccessInNamespace returns nil if the pod reached state success, or an error if it reached failure or until podStartupTimeout.

func WaitForPodSuccessInNamespaceSlow

func WaitForPodSuccessInNamespaceSlow(c clientset.Interface, podName string, namespace string) error

WaitForPodSuccessInNamespaceSlow returns nil if the pod reached state success, or an error if it reached failure or until slowPodStartupTimeout.

func WaitForPodToDisappear

func WaitForPodToDisappear(c clientset.Interface, ns, podName string, label labels.Selector, interval, timeout time.Duration) error

func WaitForPodsReady

func WaitForPodsReady(c clientset.Interface, ns, name string, minReadySeconds int) error

func WaitForPodsRunningReady

func WaitForPodsRunningReady(c clientset.Interface, ns string, minPods, allowedNotReadyPods int32, timeout time.Duration, ignoreLabels map[string]string) error

WaitForPodsRunningReady waits up to timeout to ensure that all pods in namespace ns are either running and ready, or failed but controlled by a controller. Also, it ensures that at least minPods are running and ready. It has separate behavior from other 'wait for' pods functions in that it requests the list of pods on every iteration. This is useful, for example, in cluster startup, because the number of pods increases while waiting. All pods that are in SUCCESS state are not counted.

If ignoreLabels is not empty, pods matching this selector are ignored.

func WaitForPodsSuccess

func WaitForPodsSuccess(c clientset.Interface, ns string, successPodLabels map[string]string, timeout time.Duration) error

WaitForPodsSuccess waits till all labels matching the given selector enter the Success state. The caller is expected to only invoke this method once the pods have been created.

func WaitForPodsWithLabel

func WaitForPodsWithLabel(c clientset.Interface, ns string, label labels.Selector) (pods *v1.PodList, err error)

Wait up to PodListTimeout for getting pods with certain label

func WaitForPodsWithLabelRunningReady added in v1.6.0

func WaitForPodsWithLabelRunningReady(c clientset.Interface, ns string, label labels.Selector, num int, timeout time.Duration) (pods *v1.PodList, err error)

Wait for exact amount of matching pods to become running and ready. Return the list of matching pods.

func WaitForPodsWithLabelScheduled

func WaitForPodsWithLabelScheduled(c clientset.Interface, ns string, label labels.Selector) (pods *v1.PodList, err error)

Wait for all matching pods to become scheduled and at least one matching pod exists. Return the list of matching pods.

func WaitForRCPodToDisappear

func WaitForRCPodToDisappear(c clientset.Interface, ns, rcName, podName string) error

WaitForRCPodToDisappear returns nil if the pod from the given replication controller (described by rcName) no longer exists. In case of failure or too long waiting time, an error is returned.

func WaitForRCToStabilize

func WaitForRCToStabilize(c clientset.Interface, ns, name string, timeout time.Duration) error

WaitForRCToStabilize waits till the RC has a matching generation/replica count between spec and status.

func WaitForReadyNodes added in v1.8.0

func WaitForReadyNodes(c clientset.Interface, size int, timeout time.Duration) error

WaitForReadyNodes waits up to timeout for cluster to has desired size and there is no not-ready nodes in it. By cluster size we mean number of Nodes excluding Master Node.

func WaitForReadyReplicaSet added in v1.6.0

func WaitForReadyReplicaSet(c clientset.Interface, ns, name string) error

WaitForReadyReplicaSet waits until the replicaset has all of its replicas ready.

func WaitForReplicaSetDesiredReplicas added in v1.10.8

func WaitForReplicaSetDesiredReplicas(rsClient appsclient.ReplicaSetsGetter, replicaSet *apps.ReplicaSet) error

WaitForReplicaSetDesiredReplicas waits until the replicaset has desired number of replicas.

func WaitForReplicaSetTargetAvailableReplicas added in v1.10.8

func WaitForReplicaSetTargetAvailableReplicas(c clientset.Interface, replicaSet *apps.ReplicaSet, targetReplicaNum int32) error

WaitForReplicaSetTargetAvailableReplicas waits for .status.availableReplicas of a RS to equal targetReplicaNum

func WaitForReplicaSetTargetSpecReplicas added in v1.10.8

func WaitForReplicaSetTargetSpecReplicas(c clientset.Interface, replicaSet *apps.ReplicaSet, targetReplicaNum int32) error

WaitForReplicaSetTargetSpecReplicas waits for .spec.replicas of a RS to equal targetReplicaNum

func WaitForReplicationController

func WaitForReplicationController(c clientset.Interface, namespace, name string, exist bool, interval, timeout time.Duration) error

WaitForReplicationController waits until the RC appears (exist == true), or disappears (exist == false)

func WaitForReplicationControllerwithSelector added in v1.6.0

func WaitForReplicationControllerwithSelector(c clientset.Interface, namespace string, selector labels.Selector, exist bool, interval,
	timeout time.Duration) error

WaitForReplicationControllerwithSelector waits until any RC with given selector appears (exist == true), or disappears (exist == false)

func WaitForService

func WaitForService(c clientset.Interface, namespace, name string, exist bool, interval, timeout time.Duration) error

WaitForService waits until the service appears (exist == true), or disappears (exist == false)

func WaitForServiceEndpointsNum

func WaitForServiceEndpointsNum(c clientset.Interface, namespace, serviceName string, expectNum int, interval, timeout time.Duration) error

WaitForServiceEndpointsNum waits until the amount of endpoints that implement service to expectNum.

func WaitForServiceWithSelector added in v1.6.0

func WaitForServiceWithSelector(c clientset.Interface, namespace string, selector labels.Selector, exist bool, interval,
	timeout time.Duration) error

WaitForServiceWithSelector waits until any service with given selector appears (exist == true), or disappears (exist == false)

func WaitForStableCluster added in v1.4.2

func WaitForStableCluster(c clientset.Interface, masterNodes sets.String) int

WaitForStableCluster waits until all existing pods are scheduled and returns their amount.

func WaitForStatefulSetReplicasReady added in v1.10.8

func WaitForStatefulSetReplicasReady(statefulSetName, ns string, c clientset.Interface, Poll, timeout time.Duration) error

WaitForStatefulSetReplicasReady waits for all replicas of a StatefulSet to become ready or until timeout occurs, whichever comes first.

func WaitOnPVandPVC added in v1.6.0

func WaitOnPVandPVC(c clientset.Interface, ns string, pv *v1.PersistentVolume, pvc *v1.PersistentVolumeClaim) error

Wait for the pv and pvc to bind to each other.

func WaitTimeoutForPodEvent added in v1.13.1

func WaitTimeoutForPodEvent(c clientset.Interface, podName, namespace, eventSelector, msg string, timeout time.Duration) error

WaitTimeoutForPodEvent waits for an event to occur for a pod

func WaitTimeoutForPodNoLongerRunningInNamespace added in v1.4.2

func WaitTimeoutForPodNoLongerRunningInNamespace(c clientset.Interface, podName, namespace string, timeout time.Duration) error

func WaitTimeoutForPodRunningInNamespace added in v1.7.15

func WaitTimeoutForPodRunningInNamespace(c clientset.Interface, podName, namespace string, timeout time.Duration) error

func WatchRecreateDeployment added in v1.6.0

func WatchRecreateDeployment(c clientset.Interface, d *apps.Deployment) error

WatchRecreateDeployment watches Recreate deployments and ensures no new pods will run at the same time with old pods.

Types

type APICall

type APICall struct {
	Resource    string        `json:"resource"`
	Subresource string        `json:"subresource"`
	Verb        string        `json:"verb"`
	Scope       string        `json:"scope"`
	Latency     LatencyMetric `json:"latency"`
	Count       int           `json:"count"`
}

type APIResponsiveness

type APIResponsiveness struct {
	APICalls []APICall `json:"apicalls"`
}

func HighLatencyRequests

func HighLatencyRequests(c clientset.Interface, nodeCount int) (int, *APIResponsiveness, error)

Prints top five summary metrics for request types with latency and returns number of such request types above threshold. We use a higher threshold for list calls if nodeCount is above a given threshold (i.e. cluster is big).

func (*APIResponsiveness) Len

func (a *APIResponsiveness) Len() int

func (*APIResponsiveness) Less

func (a *APIResponsiveness) Less(i, j int) bool

func (*APIResponsiveness) PrintHumanReadable added in v1.7.0

func (a *APIResponsiveness) PrintHumanReadable() string

func (*APIResponsiveness) PrintJSON added in v1.7.0

func (a *APIResponsiveness) PrintJSON() string

func (*APIResponsiveness) SummaryKind added in v1.7.0

func (a *APIResponsiveness) SummaryKind() string

func (*APIResponsiveness) Swap

func (a *APIResponsiveness) Swap(i, j int)

type Address added in v1.5.0

type Address struct {
	// contains filtered or unexported fields
}

type CleanupActionHandle

type CleanupActionHandle *int

func AddCleanupAction

func AddCleanupAction(fn func()) CleanupActionHandle

AddCleanupAction installs a function that will be called in the event of the whole test being terminated. This allows arbitrary pieces of the overall test to hook into SynchronizedAfterSuite().

type ClientConfigGetter

type ClientConfigGetter func() (*restclient.Config, error)

type CloudConfig

type CloudConfig struct {
	ApiEndpoint       string
	ProjectID         string
	Zone              string // for multizone tests, arbitrarily chosen zone
	Region            string
	MultiZone         bool
	MultiMaster       bool
	Cluster           string
	MasterName        string
	NodeInstanceGroup string // comma-delimited list of groups' names
	NumNodes          int
	ClusterIPRange    string
	ClusterTag        string
	Network           string
	ConfigFile        string // for azure and openstack
	NodeTag           string
	MasterTag         string

	Provider ProviderInterface
}

type ClusterVerification

type ClusterVerification struct {
	// contains filtered or unexported fields
}

func (*ClusterVerification) ForEach

func (cl *ClusterVerification) ForEach(podFunc func(v1.Pod)) error

ForEach runs a function against every verifiable pod. Be warned that this doesn't wait for "n" pods to verify, so it may return very quickly if you have strict pod state requirements.

For example, if you require at least 5 pods to be running before your test will pass, its smart to first call "clusterVerification.WaitFor(5)" before you call clusterVerification.ForEach.

func (*ClusterVerification) WaitFor

func (cl *ClusterVerification) WaitFor(atLeast int, timeout time.Duration) ([]v1.Pod, error)

WaitFor waits for some minimum number of pods to be verified, according to the PodStateVerification definition.

func (*ClusterVerification) WaitForOrFail

func (cl *ClusterVerification) WaitForOrFail(atLeast int, timeout time.Duration)

WaitForOrFail provides a shorthand WaitFor with failure as an option if anything goes wrong.

type ContainerFailures

type ContainerFailures struct {
	Restarts int
	// contains filtered or unexported fields
}

type ContainerResourceGatherer added in v1.10.8

type ContainerResourceGatherer struct {
	// contains filtered or unexported fields
}

func (*ContainerResourceGatherer) StartGatheringData added in v1.10.8

func (g *ContainerResourceGatherer) StartGatheringData()

StartGatheringData starts a stat gathering worker blocks for each node to track, and blocks until StopAndSummarize is called.

func (*ContainerResourceGatherer) StopAndSummarize added in v1.10.8

func (g *ContainerResourceGatherer) StopAndSummarize(percentiles []int, constraints map[string]ResourceConstraint) (*ResourceUsageSummary, error)

StopAndSummarize stops stat gathering workers, processes the collected stats, generates resource summary for the passed-in percentiles, and returns the summary. It returns an error if the resource usage at any percentile is beyond the specified resource constraints.

type ContainerResourceUsage

type ContainerResourceUsage struct {
	Name                    string
	Timestamp               time.Time
	CPUUsageInCores         float64
	MemoryUsageInBytes      uint64
	MemoryWorkingSetInBytes uint64
	MemoryRSSInBytes        uint64
	// The interval used to calculate CPUUsageInCores.
	CPUInterval time.Duration
}

type ContainersCPUSummary

type ContainersCPUSummary map[string]map[float64]float64

ContainersCPUSummary is indexed by the container name with each entry a (percentile, value) map.

type CreateTestingNSFn

type CreateTestingNSFn func(baseName string, c clientset.Interface, labels map[string]string) (*v1.Namespace, error)

type E2ETestNodePreparer added in v1.5.0

type E2ETestNodePreparer struct {
	// contains filtered or unexported fields
}

E2ETestNodePreparer implements testutils.TestNodePreparer interface, which is used to create/modify Nodes before running a test.

func (*E2ETestNodePreparer) CleanupNodes added in v1.5.0

func (p *E2ETestNodePreparer) CleanupNodes() error

func (*E2ETestNodePreparer) PrepareNodes added in v1.5.0

func (p *E2ETestNodePreparer) PrepareNodes() error

type EtcdMetrics added in v1.12.0

type EtcdMetrics struct {
	BackendCommitDuration     HistogramVec `json:"backendCommitDuration"`
	SnapshotSaveTotalDuration HistogramVec `json:"snapshotSaveTotalDuration"`
	PeerRoundTripTime         HistogramVec `json:"peerRoundTripTime"`
	WalFsyncDuration          HistogramVec `json:"walFsyncDuration"`
	MaxDatabaseSize           float64      `json:"maxDatabaseSize"`
}

func (*EtcdMetrics) PrintHumanReadable added in v1.12.0

func (l *EtcdMetrics) PrintHumanReadable() string

func (*EtcdMetrics) PrintJSON added in v1.12.0

func (l *EtcdMetrics) PrintJSON() string

func (*EtcdMetrics) SummaryKind added in v1.12.0

func (l *EtcdMetrics) SummaryKind() string

type EtcdMetricsCollector added in v1.12.0

type EtcdMetricsCollector struct {
	// contains filtered or unexported fields
}

func NewEtcdMetricsCollector added in v1.12.0

func NewEtcdMetricsCollector() *EtcdMetricsCollector

func (*EtcdMetricsCollector) GetMetrics added in v1.12.0

func (mc *EtcdMetricsCollector) GetMetrics() *EtcdMetrics

func (*EtcdMetricsCollector) StartCollecting added in v1.12.0

func (mc *EtcdMetricsCollector) StartCollecting(interval time.Duration)

StartCollecting starts to collect etcd db size metric periodically and updates MaxDatabaseSize accordingly.

func (*EtcdMetricsCollector) StopAndSummarize added in v1.12.0

func (mc *EtcdMetricsCollector) StopAndSummarize() error

type EventsLister added in v1.5.0

type EventsLister func(opts metav1.ListOptions, ns string) (*v1.EventList, error)

type ExecOptions added in v1.5.0

type ExecOptions struct {
	Command []string

	Namespace     string
	PodName       string
	ContainerName string

	Stdin         io.Reader
	CaptureStdout bool
	CaptureStderr bool
	// If false, whitespace in std{err,out} will be removed.
	PreserveWhitespace bool
}

ExecOptions passed to ExecWithOptions

type Factory added in v1.13.1

type Factory func() (ProviderInterface, error)

type FlakeReport added in v1.12.0

type FlakeReport struct {
	Flakes     []string `json:"flakes"`
	FlakeCount int      `json:"flakeCount"`
	// contains filtered or unexported fields
}

func NewFlakeReport added in v1.12.0

func NewFlakeReport() *FlakeReport

func (*FlakeReport) GetFlakeCount added in v1.12.0

func (f *FlakeReport) GetFlakeCount() int

func (*FlakeReport) PrintHumanReadable added in v1.12.0

func (f *FlakeReport) PrintHumanReadable() string

func (*FlakeReport) PrintJSON added in v1.12.0

func (f *FlakeReport) PrintJSON() string

func (*FlakeReport) RecordFlakeIfError added in v1.12.0

func (f *FlakeReport) RecordFlakeIfError(err error, optionalDescription ...interface{})

RecordFlakeIfError records the error (if non-nil) as a flake along with an optional description. This can be used as a replacement of framework.ExpectNoError() for non-critical errors that can be considered as 'flakes' to avoid causing failures in tests.

func (*FlakeReport) SummaryKind added in v1.12.0

func (f *FlakeReport) SummaryKind() string

type Framework

type Framework struct {
	BaseName string

	// Set together with creating the ClientSet and the namespace.
	// Guaranteed to be unique in the cluster even when running the same
	// test multiple times in parallel.
	UniqueName string

	ClientSet                        clientset.Interface
	KubemarkExternalClusterClientSet clientset.Interface

	InternalClientset *internalclientset.Clientset
	AggregatorClient  *aggregatorclient.Clientset
	DynamicClient     dynamic.Interface

	ScalesGetter scaleclient.ScalesGetter

	SkipNamespaceCreation bool          // Whether to skip creating a namespace
	Namespace             *v1.Namespace // Every test has at least one namespace unless creation is skipped

	NamespaceDeletionTimeout time.Duration
	SkipPrivilegedPSPBinding bool // Whether to skip creating a binding to the privileged PSP in the test namespace

	// Constraints that passed to a check which is executed after data is gathered to
	// see if 99% of results are within acceptable bounds. It has to be injected in the test,
	// as expectations vary greatly. Constraints are grouped by the container names.
	AddonResourceConstraints map[string]ResourceConstraint

	// configuration for framework's client
	Options FrameworkOptions

	// Place where various additional data is stored during test run to be printed to ReportDir,
	// or stdout if ReportDir is not set once test ends.
	TestSummaries []TestDataSummary
	// contains filtered or unexported fields
}

Framework supports common operations used by e2e tests; it will keep a client & a namespace for you. Eventual goal is to merge this with integration test framework.

func NewDefaultFramework

func NewDefaultFramework(baseName string) *Framework

NewFramework makes a new framework and sets up a BeforeEach/AfterEach for you (you can write additional before/after each functions).

func NewFramework

func NewFramework(baseName string, options FrameworkOptions, client clientset.Interface) *Framework

func (*Framework) AddNamespacesToDelete added in v1.11.2

func (f *Framework) AddNamespacesToDelete(namespaces ...*v1.Namespace)

AddNamespacesToDelete adds one or more namespaces to be deleted when the test completes.

func (*Framework) AfterEach

func (f *Framework) AfterEach()

AfterEach deletes the namespace, after reading its events.

func (*Framework) BeforeEach

func (f *Framework) BeforeEach()

BeforeEach gets a client and makes a namespace.

func (*Framework) CheckFileSizeViaContainer added in v1.4.6

func (f *Framework) CheckFileSizeViaContainer(podName, containerName, path string) (string, error)

func (*Framework) CreateFromManifests added in v1.13.1

func (f *Framework) CreateFromManifests(patch func(item interface{}) error, files ...string) (func(), error)

CreateFromManifests is a combination of LoadFromManifests, PatchItems, patching with an optional custom function, and CreateItems.

func (*Framework) CreateItems added in v1.13.1

func (f *Framework) CreateItems(items ...interface{}) (func(), error)

CreateItems creates the items. Each of them must be an API object of a type that is registered in Factory.

It returns either a cleanup function or an error, but never both.

Cleaning up after a test can be triggered in two ways:

PatchItems has the some limitations as LoadFromManifests: - only some common items are supported, unknown ones trigger an error - only the latest stable API version for each item is supported

func (*Framework) CreateNamespace

func (f *Framework) CreateNamespace(baseName string, labels map[string]string) (*v1.Namespace, error)

func (*Framework) CreatePodsPerNodeForSimpleApp

func (f *Framework) CreatePodsPerNodeForSimpleApp(appName string, podSpec func(n v1.Node) v1.PodSpec, maxCount int) map[string]string

CreatePodsPerNodeForSimpleApp Creates pods w/ labels. Useful for tests which make a bunch of pods w/o any networking.

func (*Framework) CreateServiceForSimpleApp

func (f *Framework) CreateServiceForSimpleApp(contPort, svcPort int, appName string) *v1.Service

CreateServiceForSimpleApp returns a service that selects/exposes pods (send -1 ports if no exposure needed) with an app label.

func (*Framework) CreateServiceForSimpleAppWithPods

func (f *Framework) CreateServiceForSimpleAppWithPods(contPort int, svcPort int, appName string, podSpec func(n v1.Node) v1.PodSpec, count int, block bool) (error, *v1.Service)

CreateServiceForSimpleAppWithPods is a convenience wrapper to create a service and its matching pods all at once.

func (*Framework) ExecCommandInContainer added in v1.4.2

func (f *Framework) ExecCommandInContainer(podName, containerName string, cmd ...string) string

ExecCommandInContainer executes a command in the specified container.

func (*Framework) ExecCommandInContainerWithFullOutput added in v1.5.0

func (f *Framework) ExecCommandInContainerWithFullOutput(podName, containerName string, cmd ...string) (string, string, error)

ExecCommandInContainerWithFullOutput executes a command in the specified container and return stdout, stderr and error

func (*Framework) ExecCommandInPod added in v1.4.2

func (f *Framework) ExecCommandInPod(podName string, cmd ...string) string

func (*Framework) ExecCommandInPodWithFullOutput added in v1.5.0

func (f *Framework) ExecCommandInPodWithFullOutput(podName string, cmd ...string) (string, string, error)

func (*Framework) ExecShellInContainer added in v1.4.2

func (f *Framework) ExecShellInContainer(podName, containerName string, cmd string) string

func (*Framework) ExecShellInPod added in v1.4.2

func (f *Framework) ExecShellInPod(podName string, cmd string) string

func (*Framework) ExecShellInPodWithFullOutput added in v1.5.0

func (f *Framework) ExecShellInPodWithFullOutput(podName string, cmd string) (string, string, error)

func (*Framework) ExecWithOptions added in v1.5.0

func (f *Framework) ExecWithOptions(options ExecOptions) (string, string, error)

ExecWithOptions executes a command in the specified container, returning stdout, stderr and error. `options` allowed for additional parameters to be passed.

func (*Framework) LoadFromManifests added in v1.13.1

func (f *Framework) LoadFromManifests(files ...string) ([]interface{}, error)

LoadFromManifests loads .yaml or .json manifest files and returns all items that it finds in them. It supports all items for which there is a factory registered in Factories and .yaml files with multiple items separated by "---". Files are accessed via the "testfiles" package, which means they can come from a file system or be built into the binary.

LoadFromManifests has some limitations:

func (*Framework) MatchContainerOutput added in v1.4.2

func (f *Framework) MatchContainerOutput(
	pod *v1.Pod,
	containerName string,
	expectedOutput []string,
	matcher func(string, ...interface{}) gomegatypes.GomegaMatcher) error

MatchContainerOutput creates a pod and waits for all it's containers to exit with success. It then tests that the matcher with each expectedOutput matches the output of the specified container.

func (*Framework) NewClusterVerification

func (f *Framework) NewClusterVerification(namespace *v1.Namespace, filter PodStateVerification) *ClusterVerification

func (*Framework) NewTestPod added in v1.6.0

func (f *Framework) NewTestPod(name string, requests v1.ResourceList, limits v1.ResourceList) *v1.Pod

NewTestPod returns a pod that has the specified requests and limits

func (*Framework) PatchItems added in v1.13.1

func (f *Framework) PatchItems(items ...interface{}) error

PatchItems modifies the given items in place such that each test gets its own instances, to avoid conflicts between different tests and between tests and normal deployments.

This is done by: - creating namespaced items inside the test's namespace - changing the name of non-namespaced items like ClusterRole

PatchItems has some limitations: - only some common items are supported, unknown ones trigger an error - only the latest stable API version for each item is supported

func (*Framework) PatchName added in v1.13.1

func (f *Framework) PatchName(item *string)

PatchName makes the name of some item unique by appending the generated unique name.

func (*Framework) PatchNamespace added in v1.13.1

func (f *Framework) PatchNamespace(item *string)

PatchNamespace moves the item into the test's namespace. Not all items can be namespaced. For those, the name also needs to be patched.

func (*Framework) PodClient added in v1.4.2

func (f *Framework) PodClient() *PodClient

Convenience method for getting a pod client interface in the framework's namespace, possibly applying test-suite specific transformations to the pod spec, e.g. for node e2e pod scheduling.

func (*Framework) PodClientNS added in v1.6.0

func (f *Framework) PodClientNS(namespace string) *PodClient

Convenience method for getting a pod client interface in an alternative namespace, possibly applying test-suite specific transformations to the pod spec, e.g. for node e2e pod scheduling.

func (*Framework) ReadFileViaContainer

func (f *Framework) ReadFileViaContainer(podName, containerName string, path string) (string, error)

Read a file using kubectl exec cat <path>

func (*Framework) RecordFlakeIfError added in v1.12.0

func (f *Framework) RecordFlakeIfError(err error, optionalDescription ...interface{})

func (*Framework) TestContainerOutput

func (f *Framework) TestContainerOutput(scenarioName string, pod *v1.Pod, containerIndex int, expectedOutput []string)

TestContainerOutput runs the given pod in the given namespace and waits for all of the containers in the podSpec to move into the 'Success' status, and tests the specified container log against the given expected output using a substring matcher.

func (*Framework) TestContainerOutputRegexp

func (f *Framework) TestContainerOutputRegexp(scenarioName string, pod *v1.Pod, containerIndex int, expectedOutput []string)

TestContainerOutputRegexp runs the given pod in the given namespace and waits for all of the containers in the podSpec to move into the 'Success' status, and tests the specified container log against the given expected output using a regexp matcher.

func (*Framework) WaitForPodNoLongerRunning

func (f *Framework) WaitForPodNoLongerRunning(podName string) error

WaitForPodNoLongerRunning waits for the pod to no longer be running in the namespace, for either success or failure.

func (*Framework) WaitForPodNotFound added in v1.9.0

func (f *Framework) WaitForPodNotFound(podName string, timeout time.Duration) error

WaitForPodNotFound waits for the pod to be completely terminated (not "Get-able").

func (*Framework) WaitForPodReady

func (f *Framework) WaitForPodReady(podName string) error

WaitForPodReady waits for the pod to flip to ready in the namespace.

func (*Framework) WaitForPodRunning

func (f *Framework) WaitForPodRunning(podName string) error

WaitForPodRunning waits for the pod to run in the namespace.

func (*Framework) WaitForPodRunningSlow

func (f *Framework) WaitForPodRunningSlow(podName string) error

WaitForPodRunningSlow waits for the pod to run in the namespace. It has a longer timeout then WaitForPodRunning (util.slowPodStartTimeout).

func (*Framework) WaitForPodTerminated

func (f *Framework) WaitForPodTerminated(podName, reason string) error

WaitForPodTerminated waits for the pod to be terminated with the given reason.

func (*Framework) WriteFileViaContainer

func (f *Framework) WriteFileViaContainer(podName, containerName string, path string, contents string) error

Write a file using kubectl exec echo <contents> > <path> via specified container Because of the primitive technique we're using here, we only allow ASCII alphanumeric characters

type FrameworkOptions

type FrameworkOptions struct {
	ClientQPS    float32
	ClientBurst  int
	GroupVersion *schema.GroupVersion
}

type HTTPPokeParams added in v1.13.6

type HTTPPokeParams struct {
	Timeout        time.Duration
	ExpectCode     int // default = 200
	BodyContains   string
	RetriableCodes []int
}

type HTTPPokeResult added in v1.13.6

type HTTPPokeResult struct {
	Status HTTPPokeStatus
	Code   int    // HTTP code: 0 if the connection was not made
	Error  error  // if there was any error
	Body   []byte // if code != 0
}

func PokeHTTP added in v1.13.6

func PokeHTTP(host string, port int, path string, params *HTTPPokeParams) HTTPPokeResult

PokeHTTP tries to connect to a host on a port for a given URL path. Callers can specify additional success parameters, if desired.

The result status will be characterized as precisely as possible, given the known users of this.

The result code will be zero in case of any failure to connect, or non-zero if the HTTP transaction completed (even if the other test params make this a failure).

The result error will be populated for any status other than Success.

The result body will be populated if the HTTP transaction was completed, even if the other test params make this a failure).

type HTTPPokeStatus added in v1.13.6

type HTTPPokeStatus string
const (
	HTTPSuccess HTTPPokeStatus = "Success"
	HTTPError   HTTPPokeStatus = "UnknownError"
	// Any time we add new errors, we should audit all callers of this.
	HTTPTimeout     HTTPPokeStatus = "TimedOut"
	HTTPRefused     HTTPPokeStatus = "ConnectionRefused"
	HTTPRetryCode   HTTPPokeStatus = "RetryCode"
	HTTPWrongCode   HTTPPokeStatus = "WrongCode"
	HTTPBadResponse HTTPPokeStatus = "BadResponse"
)

type Histogram added in v1.12.0

type Histogram struct {
	Labels  map[string]string `json:"labels"`
	Buckets map[string]int    `json:"buckets"`
}

type HistogramVec added in v1.12.0

type HistogramVec []Histogram

type InvariantFunc

type InvariantFunc func(older, newer runtime.Object) error

type ItemFactory added in v1.13.1

type ItemFactory interface {
	// New returns a new empty item.
	New() runtime.Object

	// Create is responsible for creating the item. It returns an
	// error or a cleanup function for the created item.
	// If the item is of an unsupported type, it must return
	// an error that has ItemNotSupported as cause.
	Create(f *Framework, item interface{}) (func() error, error)
}

ItemFactory provides support for creating one particular item. The type gets exported because other packages might want to extend the set of pre-defined factories.

type KubeCluster

type KubeCluster struct {
	Name    string `yaml:"name"`
	Cluster struct {
		CertificateAuthorityData string `yaml:"certificate-authority-data"`
		Server                   string `yaml:"server"`
	} `yaml:"cluster"`
}

type KubeConfig

type KubeConfig struct {
	Contexts []struct {
		Name    string `yaml:"name"`
		Context struct {
			Cluster string `yaml:"cluster"`
			User    string
		} `yaml:"context"`
	} `yaml:"contexts"`

	Clusters []KubeCluster `yaml:"clusters"`

	Users []KubeUser `yaml:"users"`
}

func (*KubeConfig) FindCluster added in v1.6.0

func (kc *KubeConfig) FindCluster(name string) *KubeCluster

func (*KubeConfig) FindUser added in v1.6.0

func (kc *KubeConfig) FindUser(name string) *KubeUser

type KubeUser

type KubeUser struct {
	Name string `yaml:"name"`
	User struct {
		Username string `yaml:"username"`
		Password string `yaml:"password"`
		Token    string `yaml:"token"`
	} `yaml:"user"`
}

type KubeletLatencyMetric

type KubeletLatencyMetric struct {
	// eg: list, info, create
	Operation string
	// eg: sync_pods, pod_worker
	Method string
	// 0 <= quantile <=1, e.g. 0.95 is 95%tile, 0.5 is median.
	Quantile float64
	Latency  time.Duration
}

KubeletMetric stores metrics scraped from the kubelet server's /metric endpoint. TODO: Get some more structure around the metrics and this type

type KubeletLatencyMetrics

type KubeletLatencyMetrics []KubeletLatencyMetric

KubeletMetricByLatency implements sort.Interface for []KubeletMetric based on the latency field.

func GetDefaultKubeletLatencyMetrics added in v1.11.2

func GetDefaultKubeletLatencyMetrics(ms metrics.KubeletMetrics) KubeletLatencyMetrics

GetDefaultKubeletLatencyMetrics calls GetKubeletLatencyMetrics with a set of default metricNames identifying common latency metrics. Note that the KubeletMetrics passed in should not contain subsystem prefix.

func GetKubeletLatencyMetrics

func GetKubeletLatencyMetrics(ms metrics.KubeletMetrics, filterMetricNames sets.String) KubeletLatencyMetrics

GetKubeletLatencyMetrics filters ms to include only those contained in the metricNames set, then constructs a KubeletLatencyMetrics list based on the samples associated with those metrics.

func HighLatencyKubeletOperations

func HighLatencyKubeletOperations(c clientset.Interface, threshold time.Duration, nodeName string, logFunc func(fmt string, args ...interface{})) (KubeletLatencyMetrics, error)

HighLatencyKubeletOperations logs and counts the high latency metrics exported by the kubelet server via /metrics.

func (KubeletLatencyMetrics) Len

func (a KubeletLatencyMetrics) Len() int

func (KubeletLatencyMetrics) Less

func (a KubeletLatencyMetrics) Less(i, j int) bool

func (KubeletLatencyMetrics) Swap

func (a KubeletLatencyMetrics) Swap(i, j int)

type KubemarkResourceUsage added in v1.6.0

type KubemarkResourceUsage struct {
	Name                    string
	MemoryWorkingSetInBytes uint64
	CPUUsageInCores         float64
}

type LatencyMetric

type LatencyMetric struct {
	Perc50  time.Duration `json:"Perc50"`
	Perc90  time.Duration `json:"Perc90"`
	Perc99  time.Duration `json:"Perc99"`
	Perc100 time.Duration `json:"Perc100"`
}

Dashboard metrics

func ExtractLatencyMetrics

func ExtractLatencyMetrics(latencies []PodLatencyData) LatencyMetric

type LatencySlice

type LatencySlice []PodLatencyData

func (LatencySlice) Len

func (a LatencySlice) Len() int

func (LatencySlice) Less

func (a LatencySlice) Less(i, j int) bool

func (LatencySlice) Swap

func (a LatencySlice) Swap(i, j int)

type LogSizeDataTimeseries

type LogSizeDataTimeseries map[string]map[string][]TimestampedSize

type LogSizeGatherer

type LogSizeGatherer struct {
	// contains filtered or unexported fields
}

LogSizeGatherer is a worker which grabs a WorkItem from the channel and does assigned work.

func (*LogSizeGatherer) Run

func (g *LogSizeGatherer) Run()

func (*LogSizeGatherer) Work

func (g *LogSizeGatherer) Work() bool

Work does a single unit of work: tries to take out a WorkItem from the queue, ssh-es into a given machine, gathers data, writes it to the shared <data> map, and creates a gorouting which reinserts work item into the queue with a <pollingPeriod> delay. Returns false if worker should exit.

type LogsSizeData

type LogsSizeData struct {
	// contains filtered or unexported fields
}

func (*LogsSizeData) AddNewData

func (d *LogsSizeData) AddNewData(ip, path string, timestamp time.Time, size int)

type LogsSizeDataSummary

type LogsSizeDataSummary map[string]map[string]SingleLogSummary

node -> file -> data

func (*LogsSizeDataSummary) PrintHumanReadable

func (s *LogsSizeDataSummary) PrintHumanReadable() string

TODO: make sure that we don't need locking here

func (*LogsSizeDataSummary) PrintJSON

func (s *LogsSizeDataSummary) PrintJSON() string

func (*LogsSizeDataSummary) SummaryKind added in v1.7.0

func (s *LogsSizeDataSummary) SummaryKind() string

type LogsSizeVerifier

type LogsSizeVerifier struct {
	// contains filtered or unexported fields
}

LogsSizeVerifier gathers data about log files sizes from master and node machines. It oversees a <workersNo> workers which do the gathering.

func NewLogsVerifier

func NewLogsVerifier(c clientset.Interface, stopChannel chan bool) *LogsSizeVerifier

NewLogsVerifier creates a new LogsSizeVerifier which will stop when stopChannel is closed

func (*LogsSizeVerifier) GetSummary

func (s *LogsSizeVerifier) GetSummary() *LogsSizeDataSummary

GetSummary returns a summary (average generation rate and number of probes) of the data gathered by LogSizeVerifier

func (*LogsSizeVerifier) Run

func (v *LogsSizeVerifier) Run()

Run starts log size gathering. It starts a gorouting for every worker and then blocks until stopChannel is closed

type MetricsForE2E

type MetricsForE2E metrics.Collection

func (*MetricsForE2E) PrintHumanReadable

func (m *MetricsForE2E) PrintHumanReadable() string

func (*MetricsForE2E) PrintJSON

func (m *MetricsForE2E) PrintJSON() string

func (*MetricsForE2E) SummaryKind added in v1.7.0

func (m *MetricsForE2E) SummaryKind() string

type NetworkingTestConfig added in v1.5.0

type NetworkingTestConfig struct {
	// TestContaienrPod is a test pod running the netexec image. It is capable
	// of executing tcp/udp requests against ip:port.
	TestContainerPod *v1.Pod
	// HostTestContainerPod is a pod running using the hostexec image.
	HostTestContainerPod *v1.Pod
	// if the HostTestContainerPod is running with HostNetwork=true.
	HostNetwork bool
	// EndpointPods are the pods belonging to the Service created by this
	// test config. Each invocation of `setup` creates a service with
	// 1 pod per node running the netexecImage.
	EndpointPods []*v1.Pod

	// NodePortService is a Service with Type=NodePort spanning over all
	// endpointPods.
	NodePortService *v1.Service
	// SessionAffinityService is a Service with SessionAffinity=ClientIP
	// spanning over all endpointPods.
	SessionAffinityService *v1.Service
	// ExternalAddrs is a list of external IPs of nodes in the cluster.
	ExternalAddrs []string
	// Nodes is a list of nodes in the cluster.
	Nodes []v1.Node
	// MaxTries is the number of retries tolerated for tests run against
	// endpoints and services created by this config.
	MaxTries int
	// The ClusterIP of the Service reated by this test config.
	ClusterIP string
	// External ip of first node for use in nodePort testing.
	NodeIP string
	// The http/udp nodePorts of the Service.
	NodeHttpPort int
	NodeUdpPort  int
	// The kubernetes namespace within which all resources for this
	// config are created
	Namespace string
	// contains filtered or unexported fields
}

NetworkingTestConfig is a convenience class around some utility methods for testing kubeproxy/networking/services/endpoints.

func NewCoreNetworkingTestConfig added in v1.5.0

func NewCoreNetworkingTestConfig(f *Framework, hostNetwork bool) *NetworkingTestConfig

NewNetworkingTestNodeE2EConfig creates and sets up a new test config helper for Node E2E.

func NewNetworkingTestConfig added in v1.5.0

func NewNetworkingTestConfig(f *Framework) *NetworkingTestConfig

NewNetworkingTestConfig creates and sets up a new test config helper.

func (*NetworkingTestConfig) DeleteNetProxyPod added in v1.5.0

func (config *NetworkingTestConfig) DeleteNetProxyPod()

func (*NetworkingTestConfig) DeleteNodePortService added in v1.5.0

func (config *NetworkingTestConfig) DeleteNodePortService()

func (*NetworkingTestConfig) DialFromContainer added in v1.5.0

func (config *NetworkingTestConfig) DialFromContainer(protocol, containerIP, targetIP string, containerHttpPort, targetPort, maxTries, minTries int, expectedEps sets.String)

DialFromContainers executes a curl via kubectl exec in a test container, which might then translate to a tcp or udp request based on the protocol argument in the url.

  • minTries is the minimum number of curl attempts required before declaring success. Set to 0 if you'd like to return as soon as all endpoints respond at least once.
  • maxTries is the maximum number of curl attempts. If this many attempts pass and we don't see all expected endpoints, the test fails.
  • expectedEps is the set of endpointnames to wait for. Typically this is also the hostname reported by each pod in the service through /hostName.

maxTries == minTries will confirm that we see the expected endpoints and no more for maxTries. Use this if you want to eg: fail a readiness check on a pod and confirm it doesn't show up as an endpoint.

func (*NetworkingTestConfig) DialFromEndpointContainer added in v1.5.0

func (config *NetworkingTestConfig) DialFromEndpointContainer(protocol, targetIP string, targetPort, maxTries, minTries int, expectedEps sets.String)

func (*NetworkingTestConfig) DialFromNode added in v1.5.0

func (config *NetworkingTestConfig) DialFromNode(protocol, targetIP string, targetPort, maxTries, minTries int, expectedEps sets.String)

DialFromNode executes a tcp or udp request based on protocol via kubectl exec in a test container running with host networking.

  • minTries is the minimum number of curl attempts required before declaring success. Set to 0 if you'd like to return as soon as all endpoints respond at least once.
  • maxTries is the maximum number of curl attempts. If this many attempts pass and we don't see all expected endpoints, the test fails.

maxTries == minTries will confirm that we see the expected endpoints and no more for maxTries. Use this if you want to eg: fail a readiness check on a pod and confirm it doesn't show up as an endpoint.

func (*NetworkingTestConfig) DialFromTestContainer added in v1.5.0

func (config *NetworkingTestConfig) DialFromTestContainer(protocol, targetIP string, targetPort, maxTries, minTries int, expectedEps sets.String)

func (*NetworkingTestConfig) EndpointHostnames added in v1.5.0

func (config *NetworkingTestConfig) EndpointHostnames() sets.String

EndpointHostnames returns a set of hostnames for existing endpoints.

func (*NetworkingTestConfig) GetEndpointsFromContainer added in v1.9.0

func (config *NetworkingTestConfig) GetEndpointsFromContainer(protocol, containerIP, targetIP string, containerHttpPort, targetPort, tries int) (sets.String, error)

GetEndpointsFromContainer executes a curl via kubectl exec in a test container, which might then translate to a tcp or udp request based on the protocol argument in the url. It returns all different endpoints from multiple retries.

  • tries is the number of curl attempts. If this many attempts pass and we don't see any endpoints, the test fails.

func (*NetworkingTestConfig) GetEndpointsFromTestContainer added in v1.9.0

func (config *NetworkingTestConfig) GetEndpointsFromTestContainer(protocol, targetIP string, targetPort, tries int) (sets.String, error)

func (*NetworkingTestConfig) GetSelfURL added in v1.5.0

func (config *NetworkingTestConfig) GetSelfURL(port int32, path string, expected string)

GetSelfURL executes a curl against the given path via kubectl exec into a test container running with host networking, and fails if the output doesn't match the expected string.

func (*NetworkingTestConfig) GetSelfURLStatusCode added in v1.8.0

func (config *NetworkingTestConfig) GetSelfURLStatusCode(port int32, path string, expected string)

GetSelfStatusCode executes a curl against the given path via kubectl exec into a test container running with host networking, and fails if the returned status code doesn't match the expected string.

type NodeKiller added in v1.14.0

type NodeKiller struct {
	// contains filtered or unexported fields
}

NodeKiller is a utility to simulate node failures.

func NewNodeKiller added in v1.14.0

func NewNodeKiller(config NodeKillerConfig, client clientset.Interface, provider string) *NodeKiller

NewNodeKiller creates new NodeKiller.

func (*NodeKiller) Run added in v1.14.0

func (k *NodeKiller) Run(stopCh <-chan struct{})

Run starts NodeKiller until stopCh is closed.

type NodeKillerConfig added in v1.14.0

type NodeKillerConfig struct {
	// Enabled determines whether NodeKill should do anything at all.
	// All other options below are ignored if Enabled = false.
	Enabled bool
	// FailureRatio is a percentage of all nodes that could fail simultinously.
	FailureRatio float64
	// Interval is time between node failures.
	Interval time.Duration
	// JitterFactor is factor used to jitter node failures.
	// Node will be killed between [Interval, Interval + (1.0 + JitterFactor)].
	JitterFactor float64
	// SimulatedDowntime is a duration between node is killed and recreated.
	SimulatedDowntime time.Duration
}

NodeKillerConfig describes configuration of NodeKiller -- a utility to simulate node failures.

type NodeRuntimeOperationErrorRate

type NodeRuntimeOperationErrorRate map[string]*RuntimeOperationErrorRate

NodeRuntimeOperationErrorRate is the runtime operation error rate on one node.

type NodeTestContextType added in v1.4.2

type NodeTestContextType struct {
	// NodeE2E indicates whether it is running node e2e.
	NodeE2E bool
	// Name of the node to run tests on.
	NodeName string
	// NodeConformance indicates whether the test is running in node conformance mode.
	NodeConformance bool
	// PrepullImages indicates whether node e2e framework should prepull images.
	PrepullImages bool
	// KubeletConfig is the kubelet configuration the test is running against.
	KubeletConfig kubeletconfig.KubeletConfiguration
	// ImageDescription is the description of the image on which the test is running.
	ImageDescription string
	// SystemSpecName is the name of the system spec (e.g., gke) that's used in
	// the node e2e test. If empty, the default one (system.DefaultSpec) is
	// used. The system specs are in test/e2e_node/system/specs/.
	SystemSpecName string
	// ExtraEnvs is a map of environment names to values.
	ExtraEnvs map[string]string
}

NodeTestContextType is part of TestContextType, it is shared by all node e2e test.

type NodesCPUSummary

type NodesCPUSummary map[string]ContainersCPUSummary

NodesCPUSummary is indexed by the node name with each entry a ContainersCPUSummary map.

type NodesSet added in v1.13.1

type NodesSet int
const (
	AllNodes          NodesSet = 0 // All containers on all nodes
	MasterNodes       NodesSet = 1 // All containers on Master nodes only
	MasterAndDNSNodes NodesSet = 2 // All containers on Master nodes and DNS containers on other nodes
)

type NullProvider added in v1.13.1

type NullProvider struct{}

NullProvider is the default implementation of the ProviderInterface which doesn't do anything.

func (NullProvider) CleanupServiceResources added in v1.13.1

func (n NullProvider) CleanupServiceResources(c clientset.Interface, loadBalancerName, region, zone string)

func (NullProvider) CreatePD added in v1.13.1

func (n NullProvider) CreatePD(zone string) (string, error)

func (NullProvider) CreatePVSource added in v1.13.1

func (n NullProvider) CreatePVSource(zone, diskName string) (*v1.PersistentVolumeSource, error)

func (NullProvider) DeleteNode added in v1.14.0

func (n NullProvider) DeleteNode(node *v1.Node) error

func (NullProvider) DeletePD added in v1.13.1

func (n NullProvider) DeletePD(pdName string) error

func (NullProvider) DeletePVSource added in v1.13.1

func (n NullProvider) DeletePVSource(pvSource *v1.PersistentVolumeSource) error

func (NullProvider) EnableAndDisableInternalLB added in v1.13.1

func (n NullProvider) EnableAndDisableInternalLB() (enable, disable func(svc *v1.Service))

func (NullProvider) EnsureLoadBalancerResourcesDeleted added in v1.13.1

func (n NullProvider) EnsureLoadBalancerResourcesDeleted(ip, portRange string) error

func (NullProvider) FrameworkAfterEach added in v1.13.1

func (n NullProvider) FrameworkAfterEach(f *Framework)

func (NullProvider) FrameworkBeforeEach added in v1.13.1

func (n NullProvider) FrameworkBeforeEach(f *Framework)

func (NullProvider) GetGroupNodes added in v1.13.1

func (n NullProvider) GetGroupNodes(group string) ([]string, error)

func (NullProvider) GroupSize added in v1.13.1

func (n NullProvider) GroupSize(group string) (int, error)

func (NullProvider) LoadBalancerSrcRanges added in v1.13.1

func (n NullProvider) LoadBalancerSrcRanges() []string

func (NullProvider) ResizeGroup added in v1.13.1

func (n NullProvider) ResizeGroup(string, int32) error

type PVCMap added in v1.6.0

type PVCMap map[types.NamespacedName]pvcval

type PVMap added in v1.6.0

type PVMap map[string]pvval

type PersistentVolumeClaimConfig added in v1.7.0

type PersistentVolumeClaimConfig struct {
	AccessModes      []v1.PersistentVolumeAccessMode
	Annotations      map[string]string
	Selector         *metav1.LabelSelector
	StorageClassName *string
	VolumeMode       *v1.PersistentVolumeMode
}

type PersistentVolumeConfig added in v1.6.0

type PersistentVolumeConfig struct {
	PVSource         v1.PersistentVolumeSource
	Prebind          *v1.PersistentVolumeClaim
	ReclaimPolicy    v1.PersistentVolumeReclaimPolicy
	NamePrefix       string
	Labels           labels.Set
	StorageClassName string
	NodeAffinity     *v1.VolumeNodeAffinity
	VolumeMode       *v1.PersistentVolumeMode
}

PersistentVolumeConfig is consumed by MakePersistentVolume() to generate a PV object for varying storage options (NFS, ceph, glusterFS, etc.). (+optional) prebind holds a pre-bound PVC Example pvSource:

pvSource: api.PersistentVolumeSource{
	NFS: &api.NFSVolumeSource{
 		...
 	},
 }

type PingCommand added in v1.9.0

type PingCommand string
const (
	IPv4PingCommand PingCommand = "ping"
	IPv6PingCommand PingCommand = "ping6"
)

type PodClient added in v1.4.2

type PodClient struct {
	v1core.PodInterface
	// contains filtered or unexported fields
}

func (*PodClient) Create added in v1.4.2

func (c *PodClient) Create(pod *v1.Pod) *v1.Pod

Create creates a new pod according to the framework specifications (don't wait for it to start).

func (*PodClient) CreateBatch added in v1.4.2

func (c *PodClient) CreateBatch(pods []*v1.Pod) []*v1.Pod

CreateBatch create a batch of pods. All pods are created before waiting.

func (*PodClient) CreateEventually added in v1.13.1

func (c *PodClient) CreateEventually(pod *v1.Pod, opts ...interface{}) *v1.Pod

CreateEventually retries pod creation for a while before failing the test with the most recent error. This mimicks the behavior of a controller (like the one for DaemonSet) and is necessary because pod creation can fail while its service account is still getting provisioned (https://github.com/kubernetes/kubernetes/issues/68776).

Both the timeout and polling interval are configurable as optional arguments: - The first optional argument is the timeout. - The second optional argument is the polling interval.

Both intervals can either be specified as time.Duration, parsable duration strings or as floats/integers. In the last case they are interpreted as seconds.

func (*PodClient) CreateSync added in v1.4.2

func (c *PodClient) CreateSync(pod *v1.Pod) *v1.Pod

CreateSync creates a new pod according to the framework specifications, and wait for it to start.

func (*PodClient) CreateSyncInNamespace added in v1.6.0

func (c *PodClient) CreateSyncInNamespace(pod *v1.Pod, namespace string) *v1.Pod

CreateSync creates a new pod according to the framework specifications in the given namespace, and waits for it to start.

func (*PodClient) DeleteSync added in v1.5.0

func (c *PodClient) DeleteSync(name string, options *metav1.DeleteOptions, timeout time.Duration)

DeleteSync deletes the pod and wait for the pod to disappear for `timeout`. If the pod doesn't disappear before the timeout, it will fail the test.

func (*PodClient) DeleteSyncInNamespace added in v1.6.0

func (c *PodClient) DeleteSyncInNamespace(name string, namespace string, options *metav1.DeleteOptions, timeout time.Duration)

DeleteSyncInNamespace deletes the pod from the namespace and wait for the pod to disappear for `timeout`. If the pod doesn't disappear before the timeout, it will fail the test.

func (*PodClient) MatchContainerOutput added in v1.5.0

func (c *PodClient) MatchContainerOutput(name string, containerName string, expectedRegexp string) error

MatchContainerOutput gets output of a container and match expected regexp in the output.

func (*PodClient) PodIsReady added in v1.12.0

func (c *PodClient) PodIsReady(name string) bool

func (*PodClient) Update added in v1.4.2

func (c *PodClient) Update(name string, updateFn func(pod *v1.Pod))

Update updates the pod object. It retries if there is a conflict, throw out error if there is any other errors. name is the pod name, updateFn is the function updating the pod object.

func (*PodClient) WaitForErrorEventOrSuccess added in v1.6.0

func (c *PodClient) WaitForErrorEventOrSuccess(pod *v1.Pod) (*v1.Event, error)

WaitForSuccess waits for pod to succeed or an error event for that pod.

func (*PodClient) WaitForFailure added in v1.8.0

func (c *PodClient) WaitForFailure(name string, timeout time.Duration)

WaitForFailure waits for pod to fail.

func (*PodClient) WaitForSuccess added in v1.5.0

func (c *PodClient) WaitForSuccess(name string, timeout time.Duration)

TODO(random-liu): Move pod wait function into this file WaitForSuccess waits for pod to succeed.

type PodLatencyData

type PodLatencyData struct {
	// Name of the pod
	Name string
	// Node this pod was running on
	Node string
	// Latency information related to pod startuptime
	Latency time.Duration
}

PodLatencyData encapsulates pod startup latency information.

type PodNode added in v1.14.0

type PodNode struct {
	// Pod represents pod name
	Pod string
	// Node represents node name
	Node string
}

PodNode is a pod-node pair indicating which node a given pod is running on

func PodNodePairs added in v1.14.0

func PodNodePairs(c clientset.Interface, ns string) ([]PodNode, error)

PodNodePairs return PodNode pairs for all pods in a namespace

type PodStartupLatency

type PodStartupLatency struct {
	CreateToScheduleLatency LatencyMetric `json:"createToScheduleLatency"`
	ScheduleToRunLatency    LatencyMetric `json:"scheduleToRunLatency"`
	RunToWatchLatency       LatencyMetric `json:"runToWatchLatency"`
	ScheduleToWatchLatency  LatencyMetric `json:"scheduleToWatchLatency"`
	E2ELatency              LatencyMetric `json:"e2eLatency"`
}

func (*PodStartupLatency) PrintHumanReadable added in v1.7.0

func (l *PodStartupLatency) PrintHumanReadable() string

func (*PodStartupLatency) PrintJSON added in v1.7.0

func (l *PodStartupLatency) PrintJSON() string

func (*PodStartupLatency) SummaryKind added in v1.7.0

func (l *PodStartupLatency) SummaryKind() string

type PodStateVerification

type PodStateVerification struct {
	// Optional: only pods that have k=v labels will pass this filter.
	Selectors map[string]string

	// Required: The phases which are valid for your pod.
	ValidPhases []v1.PodPhase

	// Optional: only pods passing this function will pass the filter
	// Verify a pod.
	// As an optimization, in addition to specifying filter (boolean),
	// this function allows specifying an error as well.
	// The error indicates that the polling of the pod spectrum should stop.
	Verify func(v1.Pod) (bool, error)

	// Optional: only pods with this name will pass the filter.
	PodName string
}

PodStateVerification represents a verification of pod state. Any time you have a set of pods that you want to operate against or query, this struct can be used to declaratively identify those pods.

type PortsByPodName added in v1.6.0

type PortsByPodName map[string][]int

type PortsByPodUID added in v1.6.0

type PortsByPodUID map[types.UID][]int

func GetContainerPortsByPodUID added in v1.6.0

func GetContainerPortsByPodUID(endpoints *v1.Endpoints) PortsByPodUID

type ProviderInterface added in v1.13.1

type ProviderInterface interface {
	FrameworkBeforeEach(f *Framework)
	FrameworkAfterEach(f *Framework)

	ResizeGroup(group string, size int32) error
	GetGroupNodes(group string) ([]string, error)
	GroupSize(group string) (int, error)

	DeleteNode(node *v1.Node) error

	CreatePD(zone string) (string, error)
	DeletePD(pdName string) error
	CreatePVSource(zone, diskName string) (*v1.PersistentVolumeSource, error)
	DeletePVSource(pvSource *v1.PersistentVolumeSource) error

	CleanupServiceResources(c clientset.Interface, loadBalancerName, region, zone string)

	EnsureLoadBalancerResourcesDeleted(ip, portRange string) error
	LoadBalancerSrcRanges() []string
	EnableAndDisableInternalLB() (enable, disable func(svc *v1.Service))
}

ProviderInterface contains the implementation for certain provider-specific functionality.

func SetupProviderConfig added in v1.13.1

func SetupProviderConfig(providerName string) (ProviderInterface, error)

SetupProviderConfig validates the chosen provider and creates an interface instance for it.

type ResourceConstraint

type ResourceConstraint struct {
	CPUConstraint    float64
	MemoryConstraint uint64
}

type ResourceGathererOptions

type ResourceGathererOptions struct {
	InKubemark                  bool
	Nodes                       NodesSet
	ResourceDataGatheringPeriod time.Duration
	ProbeDuration               time.Duration
	PrintVerboseLogs            bool
}

type ResourceMonitor

type ResourceMonitor struct {
	// contains filtered or unexported fields
}

ResourceMonitor manages a resourceCollector per node.

func NewResourceMonitor

func NewResourceMonitor(c clientset.Interface, containerNames []string, pollingInterval time.Duration) *ResourceMonitor

func (*ResourceMonitor) FormatCPUSummary

func (r *ResourceMonitor) FormatCPUSummary(summary NodesCPUSummary) string

func (*ResourceMonitor) FormatResourceUsage

func (r *ResourceMonitor) FormatResourceUsage(s ResourceUsagePerNode) string

func (*ResourceMonitor) GetCPUSummary

func (r *ResourceMonitor) GetCPUSummary() NodesCPUSummary

func (*ResourceMonitor) GetLatest

func (r *ResourceMonitor) GetLatest() (ResourceUsagePerNode, error)

func (*ResourceMonitor) GetMasterNodeCPUSummary

func (r *ResourceMonitor) GetMasterNodeCPUSummary(summaryPerNode NodesCPUSummary) NodesCPUSummary

func (*ResourceMonitor) GetMasterNodeLatest

func (r *ResourceMonitor) GetMasterNodeLatest(usagePerNode ResourceUsagePerNode) ResourceUsagePerNode

func (*ResourceMonitor) LogCPUSummary

func (r *ResourceMonitor) LogCPUSummary()

func (*ResourceMonitor) LogLatest

func (r *ResourceMonitor) LogLatest()

func (*ResourceMonitor) Reset

func (r *ResourceMonitor) Reset()

func (*ResourceMonitor) Start

func (r *ResourceMonitor) Start()

func (*ResourceMonitor) Stop

func (r *ResourceMonitor) Stop()

type ResourceUsagePerContainer

type ResourceUsagePerContainer map[string]*ContainerResourceUsage

type ResourceUsagePerNode

type ResourceUsagePerNode map[string]ResourceUsagePerContainer

type ResourceUsageSummary

type ResourceUsageSummary map[string][]SingleContainerSummary

we can't have int here, as JSON does not accept integer keys.

func (*ResourceUsageSummary) PrintHumanReadable

func (s *ResourceUsageSummary) PrintHumanReadable() string

func (*ResourceUsageSummary) PrintJSON

func (s *ResourceUsageSummary) PrintJSON() string

func (*ResourceUsageSummary) SummaryKind added in v1.7.0

func (s *ResourceUsageSummary) SummaryKind() string

type RuntimeOperationErrorRate

type RuntimeOperationErrorRate struct {
	TotalNumber float64
	ErrorRate   float64
	TimeoutRate float64
}

RuntimeOperationErrorRate is the error rate of a specified runtime operation.

type RuntimeOperationMonitor

type RuntimeOperationMonitor struct {
	// contains filtered or unexported fields
}

RuntimeOperationMonitor is the tool getting and parsing docker operation metrics.

func NewRuntimeOperationMonitor

func NewRuntimeOperationMonitor(c clientset.Interface) *RuntimeOperationMonitor

func (*RuntimeOperationMonitor) GetLatestRuntimeOperationErrorRate

func (m *RuntimeOperationMonitor) GetLatestRuntimeOperationErrorRate() map[string]NodeRuntimeOperationErrorRate

GetLatestRuntimeOperationErrorRate gets latest error rate and timeout rate from last observed RuntimeOperationErrorRate.

func (*RuntimeOperationMonitor) GetRuntimeOperationErrorRate

func (m *RuntimeOperationMonitor) GetRuntimeOperationErrorRate() map[string]NodeRuntimeOperationErrorRate

GetRuntimeOperationErrorRate gets runtime operation records from kubelet metrics and calculate error rates of all runtime operations.

type SSHResult

type SSHResult struct {
	User   string
	Host   string
	Cmd    string
	Stdout string
	Stderr string
	Code   int
}

func IssueSSHCommandWithResult added in v1.4.6

func IssueSSHCommandWithResult(cmd, provider string, node *v1.Node) (*SSHResult, error)

func NodeExec added in v1.7.0

func NodeExec(nodeName, cmd string) (SSHResult, error)

NodeExec execs the given cmd on node via SSH. Note that the nodeName is an sshable name, eg: the name returned by framework.GetMasterHost(). This is also not guaranteed to work across cloud providers since it involves ssh.

func SSH

func SSH(cmd, host, provider string) (SSHResult, error)

SSH synchronously SSHs to a node running on provider and runs cmd. If there is no error performing the SSH, the stdout, stderr, and exit code are returned.

type SaturationTime

type SaturationTime struct {
	TimeToSaturate time.Duration `json:"timeToSaturate"`
	NumberOfNodes  int           `json:"numberOfNodes"`
	NumberOfPods   int           `json:"numberOfPods"`
	Throughput     float32       `json:"throughput"`
}

type SchedulingMetrics added in v1.11.2

type SchedulingMetrics struct {
	PredicateEvaluationLatency  LatencyMetric `json:"predicateEvaluationLatency"`
	PriorityEvaluationLatency   LatencyMetric `json:"priorityEvaluationLatency"`
	PreemptionEvaluationLatency LatencyMetric `json:"preemptionEvaluationLatency"`
	BindingLatency              LatencyMetric `json:"bindingLatency"`
	ThroughputAverage           float64       `json:"throughputAverage"`
	ThroughputPerc50            float64       `json:"throughputPerc50"`
	ThroughputPerc90            float64       `json:"throughputPerc90"`
	ThroughputPerc99            float64       `json:"throughputPerc99"`
}

func VerifySchedulerLatency

func VerifySchedulerLatency(c clientset.Interface) (*SchedulingMetrics, error)

Verifies (currently just by logging them) the scheduling latencies.

func (*SchedulingMetrics) PrintHumanReadable added in v1.11.2

func (l *SchedulingMetrics) PrintHumanReadable() string

func (*SchedulingMetrics) PrintJSON added in v1.11.2

func (l *SchedulingMetrics) PrintJSON() string

func (*SchedulingMetrics) SummaryKind added in v1.11.2

func (l *SchedulingMetrics) SummaryKind() string

type ServiceTestFixture added in v1.6.0

type ServiceTestFixture struct {
	ServiceName string
	Namespace   string
	Client      clientset.Interface

	TestId string
	Labels map[string]string

	Name  string
	Image string
	// contains filtered or unexported fields
}

Simple helper class to avoid too much boilerplate in tests

func NewServerTest added in v1.6.0

func NewServerTest(client clientset.Interface, namespace string, serviceName string) *ServiceTestFixture

func (*ServiceTestFixture) BuildServiceSpec added in v1.6.0

func (t *ServiceTestFixture) BuildServiceSpec() *v1.Service

Build default config for a service (which can then be changed)

func (*ServiceTestFixture) Cleanup added in v1.6.0

func (t *ServiceTestFixture) Cleanup() []error

func (*ServiceTestFixture) CreateRC added in v1.6.0

CreateRC creates a replication controller and records it for cleanup.

func (*ServiceTestFixture) CreateService added in v1.6.0

func (t *ServiceTestFixture) CreateService(service *v1.Service) (*v1.Service, error)

Create a service, and record it for cleanup

func (*ServiceTestFixture) CreateWebserverRC added in v1.6.0

func (t *ServiceTestFixture) CreateWebserverRC(replicas int32) *v1.ReplicationController

CreateWebserverRC creates rc-backed pods with the well-known webserver configuration and records it for cleanup.

func (*ServiceTestFixture) DeleteService added in v1.6.0

func (t *ServiceTestFixture) DeleteService(serviceName string) error

Delete a service, and remove it from the cleanup list

type ServiceTestJig added in v1.6.0

type ServiceTestJig struct {
	ID     string
	Name   string
	Client clientset.Interface
	Labels map[string]string
}

A test jig to help service testing.

func NewServiceTestJig added in v1.6.0

func NewServiceTestJig(client clientset.Interface, name string) *ServiceTestJig

NewServiceTestJig allocates and inits a new ServiceTestJig.

func (*ServiceTestJig) AddRCAntiAffinity added in v1.7.0

func (j *ServiceTestJig) AddRCAntiAffinity(rc *v1.ReplicationController)

func (*ServiceTestJig) ChangeServiceNodePortOrFail added in v1.6.0

func (j *ServiceTestJig) ChangeServiceNodePortOrFail(namespace, name string, initial int) *v1.Service

func (*ServiceTestJig) ChangeServiceType added in v1.6.0

func (j *ServiceTestJig) ChangeServiceType(namespace, name string, newType v1.ServiceType, timeout time.Duration)

func (*ServiceTestJig) CreateExternalNameServiceOrFail added in v1.8.0

func (j *ServiceTestJig) CreateExternalNameServiceOrFail(namespace string, tweak func(svc *v1.Service)) *v1.Service

CreateExternalNameServiceOrFail creates a new ExternalName type Service based on the jig's defaults. Callers can provide a function to tweak the Service object before it is created.

func (*ServiceTestJig) CreateLoadBalancerService added in v1.7.0

func (j *ServiceTestJig) CreateLoadBalancerService(namespace, serviceName string, timeout time.Duration, tweak func(svc *v1.Service)) *v1.Service

CreateLoadBalancerService creates a loadbalancer service and waits for it to acquire an ingress IP.

func (*ServiceTestJig) CreateOnlyLocalLoadBalancerService added in v1.6.0

func (j *ServiceTestJig) CreateOnlyLocalLoadBalancerService(namespace, serviceName string, timeout time.Duration, createPod bool,
	tweak func(svc *v1.Service)) *v1.Service

CreateOnlyLocalLoadBalancerService creates a loadbalancer service with ExternalTrafficPolicy set to Local and waits for it to acquire an ingress IP. If createPod is true, it also creates an RC with 1 replica of the standard netexec container used everywhere in this test.

func (*ServiceTestJig) CreateOnlyLocalNodePortService added in v1.6.0

func (j *ServiceTestJig) CreateOnlyLocalNodePortService(namespace, serviceName string, createPod bool) *v1.Service

CreateOnlyLocalNodePortService creates a NodePort service with ExternalTrafficPolicy set to Local and sanity checks its nodePort. If createPod is true, it also creates an RC with 1 replica of the standard netexec container used everywhere in this test.

func (*ServiceTestJig) CreatePDBOrFail added in v1.7.0

func (j *ServiceTestJig) CreatePDBOrFail(namespace string, rc *v1.ReplicationController) *policyv1beta1.PodDisruptionBudget

func (*ServiceTestJig) CreateServiceWithServicePort added in v1.11.2

func (j *ServiceTestJig) CreateServiceWithServicePort(labels map[string]string, namespace string, ports []v1.ServicePort) (*v1.Service, error)

CreateServiceWithServicePort creates a new Service with ServicePort.

func (*ServiceTestJig) CreateTCPServiceOrFail added in v1.6.0

func (j *ServiceTestJig) CreateTCPServiceOrFail(namespace string, tweak func(svc *v1.Service)) *v1.Service

CreateTCPServiceOrFail creates a new TCP Service based on the jig's defaults. Callers can provide a function to tweak the Service object before it is created.

func (*ServiceTestJig) CreateTCPServiceWithPort added in v1.6.0

func (j *ServiceTestJig) CreateTCPServiceWithPort(namespace string, tweak func(svc *v1.Service), port int32) *v1.Service

CreateTCPServiceWithPort creates a new TCP Service with given port based on the jig's defaults. Callers can provide a function to tweak the Service object before it is created.

func (*ServiceTestJig) CreateUDPServiceOrFail added in v1.6.0

func (j *ServiceTestJig) CreateUDPServiceOrFail(namespace string, tweak func(svc *v1.Service)) *v1.Service

CreateUDPServiceOrFail creates a new UDP Service based on the jig's defaults. Callers can provide a function to tweak the Service object before it is created.

func (*ServiceTestJig) GetEndpointNodes added in v1.6.0

func (j *ServiceTestJig) GetEndpointNodes(svc *v1.Service) map[string][]string

GetEndpointNodes returns a map of nodenames:external-ip on which the endpoints of the given Service are running.

func (*ServiceTestJig) GetHTTPContent added in v1.6.0

func (j *ServiceTestJig) GetHTTPContent(host string, port int, timeout time.Duration, url string) bytes.Buffer

func (*ServiceTestJig) GetNodes added in v1.6.0

func (j *ServiceTestJig) GetNodes(maxNodesForTest int) (nodes *v1.NodeList)

getNodes returns the first maxNodesForTest nodes. Useful in large clusters where we don't eg: want to create an endpoint per node.

func (*ServiceTestJig) GetNodesNames added in v1.6.0

func (j *ServiceTestJig) GetNodesNames(maxNodesForTest int) []string

func (*ServiceTestJig) LaunchEchoserverPodOnNode added in v1.6.0

func (j *ServiceTestJig) LaunchEchoserverPodOnNode(f *Framework, nodeName, podName string)

LaunchEchoserverPodOnNode launches a pod serving http on port 8080 to act as the target for source IP preservation test. The client's source ip would be echoed back by the web server.

func (*ServiceTestJig) LaunchNetexecPodOnNode added in v1.6.0

func (j *ServiceTestJig) LaunchNetexecPodOnNode(f *Framework, nodeName, podName string, httpPort, udpPort int32, hostNetwork bool)

func (*ServiceTestJig) RunOrFail added in v1.6.0

func (j *ServiceTestJig) RunOrFail(namespace string, tweak func(rc *v1.ReplicationController)) *v1.ReplicationController

RunOrFail creates a ReplicationController and Pod(s) and waits for the Pod(s) to be running. Callers can provide a function to tweak the RC object before it is created.

func (*ServiceTestJig) SanityCheckService added in v1.6.0

func (j *ServiceTestJig) SanityCheckService(svc *v1.Service, svcType v1.ServiceType)

func (*ServiceTestJig) Scale added in v1.13.6

func (j *ServiceTestJig) Scale(namespace string, replicas int)

func (*ServiceTestJig) TestHTTPHealthCheckNodePort added in v1.6.0

func (j *ServiceTestJig) TestHTTPHealthCheckNodePort(host string, port int, request string, timeout time.Duration, expectSucceed bool, threshold int) error

func (*ServiceTestJig) TestNotReachableHTTP added in v1.6.0

func (j *ServiceTestJig) TestNotReachableHTTP(host string, port int, timeout time.Duration)

func (*ServiceTestJig) TestNotReachableUDP added in v1.6.0

func (j *ServiceTestJig) TestNotReachableUDP(host string, port int, timeout time.Duration)

func (*ServiceTestJig) TestReachableHTTP added in v1.6.0

func (j *ServiceTestJig) TestReachableHTTP(host string, port int, timeout time.Duration)

func (*ServiceTestJig) TestReachableHTTPWithRetriableErrorCodes added in v1.8.0

func (j *ServiceTestJig) TestReachableHTTPWithRetriableErrorCodes(host string, port int, retriableErrCodes []int, timeout time.Duration)

func (*ServiceTestJig) TestReachableUDP added in v1.6.0

func (j *ServiceTestJig) TestReachableUDP(host string, port int, timeout time.Duration)

func (*ServiceTestJig) TestRejectedHTTP added in v1.13.6

func (j *ServiceTestJig) TestRejectedHTTP(host string, port int, timeout time.Duration)

func (*ServiceTestJig) TestRejectedUDP added in v1.13.6

func (j *ServiceTestJig) TestRejectedUDP(host string, port int, timeout time.Duration)

func (*ServiceTestJig) UpdateService added in v1.6.0

func (j *ServiceTestJig) UpdateService(namespace, name string, update func(*v1.Service)) (*v1.Service, error)

UpdateService fetches a service, calls the update function on it, and then attempts to send the updated service. It tries up to 3 times in the face of timeouts and conflicts.

func (*ServiceTestJig) UpdateServiceOrFail added in v1.6.0

func (j *ServiceTestJig) UpdateServiceOrFail(namespace, name string, update func(*v1.Service)) *v1.Service

UpdateServiceOrFail fetches a service, calls the update function on it, and then attempts to send the updated service. It tries up to 3 times in the face of timeouts and conflicts.

func (*ServiceTestJig) WaitForEndpointOnNode added in v1.6.0

func (j *ServiceTestJig) WaitForEndpointOnNode(namespace, serviceName, nodeName string)

func (*ServiceTestJig) WaitForLoadBalancerDestroyOrFail added in v1.6.0

func (j *ServiceTestJig) WaitForLoadBalancerDestroyOrFail(namespace, name string, ip string, port int, timeout time.Duration) *v1.Service

func (*ServiceTestJig) WaitForLoadBalancerOrFail added in v1.6.0

func (j *ServiceTestJig) WaitForLoadBalancerOrFail(namespace, name string, timeout time.Duration) *v1.Service

func (*ServiceTestJig) WaitForNewIngressIPOrFail added in v1.8.0

func (j *ServiceTestJig) WaitForNewIngressIPOrFail(namespace, name, existingIP string, timeout time.Duration) *v1.Service

type SingleContainerSummary

type SingleContainerSummary struct {
	Name string
	Cpu  float64
	Mem  uint64
}

type SingleLogSummary

type SingleLogSummary struct {
	AverageGenerationRate int
	NumberOfProbes        int
}

type StatefulSetTester added in v1.6.0

type StatefulSetTester struct {
	// contains filtered or unexported fields
}

StatefulSetTester is a struct that contains utility methods for testing StatefulSet related functionality. It uses a clientset.Interface to communicate with the API server.

func NewStatefulSetTester added in v1.6.0

func NewStatefulSetTester(c clientset.Interface) *StatefulSetTester

NewStatefulSetTester creates a StatefulSetTester that uses c to interact with the API server.

func (*StatefulSetTester) BreakHttpProbe added in v1.7.8

func (s *StatefulSetTester) BreakHttpProbe(ss *apps.StatefulSet) error

BreakHttpProbe breaks the readiness probe for Nginx StatefulSet containers in ss.

func (*StatefulSetTester) BreakPodHttpProbe added in v1.7.8

func (s *StatefulSetTester) BreakPodHttpProbe(ss *apps.StatefulSet, pod *v1.Pod) error

BreakPodHttpProbe breaks the readiness probe for Nginx StatefulSet containers in one pod.

func (*StatefulSetTester) CheckHostname added in v1.6.0

func (s *StatefulSetTester) CheckHostname(ss *apps.StatefulSet) error

CheckHostname verifies that all Pods in ss have the correct Hostname. If the returned error is not nil than verification failed.

func (*StatefulSetTester) CheckMount added in v1.6.0

func (s *StatefulSetTester) CheckMount(ss *apps.StatefulSet, mountPath string) error

CheckMount checks that the mount at mountPath is valid for all Pods in ss.

func (*StatefulSetTester) CheckServiceName added in v1.6.0

func (p *StatefulSetTester) CheckServiceName(ss *apps.StatefulSet, expectedServiceName string) error

CheckServiceName asserts that the ServiceName for ss is equivalent to expectedServiceName.

func (*StatefulSetTester) ConfirmStatefulPodCount added in v1.6.0

func (s *StatefulSetTester) ConfirmStatefulPodCount(count int, ss *apps.StatefulSet, timeout time.Duration, hard bool)

ConfirmStatefulPodCount asserts that the current number of Pods in ss is count waiting up to timeout for ss to to scale to count.

func (*StatefulSetTester) CreateStatefulSet added in v1.6.0

func (s *StatefulSetTester) CreateStatefulSet(manifestPath, ns string) *apps.StatefulSet

CreateStatefulSet creates a StatefulSet from the manifest at manifestPath in the Namespace ns using kubectl create.

func (*StatefulSetTester) DeleteStatefulPodAtIndex added in v1.6.0

func (s *StatefulSetTester) DeleteStatefulPodAtIndex(index int, ss *apps.StatefulSet)

DeleteStatefulPodAtIndex deletes the Pod with ordinal index in ss.

func (*StatefulSetTester) ExecInStatefulPods added in v1.6.0

func (s *StatefulSetTester) ExecInStatefulPods(ss *apps.StatefulSet, cmd string) error

ExecInStatefulPods executes cmd in all Pods in ss. If a error occurs it is returned and cmd is not execute in any subsequent Pods.

func (*StatefulSetTester) GetPodList added in v1.6.0

func (s *StatefulSetTester) GetPodList(ss *apps.StatefulSet) *v1.PodList

GetPodList gets the current Pods in ss.

func (*StatefulSetTester) GetStatefulSet added in v1.7.0

func (s *StatefulSetTester) GetStatefulSet(namespace, name string) *apps.StatefulSet

GetStatefulSet gets the StatefulSet named name in namespace.

func (*StatefulSetTester) PauseNewPods added in v1.7.8

func (s *StatefulSetTester) PauseNewPods(ss *apps.StatefulSet)

PauseNewPods adds an always-failing ReadinessProbe to the StatefulSet PodTemplate. This causes all newly-created Pods to stay Unready until they are manually resumed with ResumeNextPod(). Note that this cannot be used together with SetHttpProbe().

func (*StatefulSetTester) Restart added in v1.6.0

func (s *StatefulSetTester) Restart(ss *apps.StatefulSet)

Restart scales ss to 0 and then back to its previous number of replicas.

func (*StatefulSetTester) RestoreHttpProbe added in v1.7.8

func (s *StatefulSetTester) RestoreHttpProbe(ss *apps.StatefulSet) error

RestoreHttpProbe restores the readiness probe for Nginx StatefulSet containers in ss.

func (*StatefulSetTester) RestorePodHttpProbe added in v1.7.8

func (s *StatefulSetTester) RestorePodHttpProbe(ss *apps.StatefulSet, pod *v1.Pod) error

RestorePodHttpProbe restores the readiness probe for Nginx StatefulSet containers in pod.

func (*StatefulSetTester) ResumeNextPod added in v1.7.8

func (s *StatefulSetTester) ResumeNextPod(ss *apps.StatefulSet)

ResumeNextPod allows the next Pod in the StatefulSet to continue by removing the ReadinessProbe added by PauseNewPods(), if it's still there. It fails the test if it finds any pods that are not in phase Running, or if it finds more than one paused Pod existing at the same time. This is a no-op if there are no paused pods.

func (*StatefulSetTester) Saturate added in v1.6.0

func (s *StatefulSetTester) Saturate(ss *apps.StatefulSet)

Saturate waits for all Pods in ss to become Running and Ready.

func (*StatefulSetTester) Scale added in v1.6.0

func (s *StatefulSetTester) Scale(ss *apps.StatefulSet, count int32) (*apps.StatefulSet, error)

Scale scales ss to count replicas.

func (*StatefulSetTester) SetHttpProbe added in v1.7.8

func (s *StatefulSetTester) SetHttpProbe(ss *apps.StatefulSet)

SetHttpProbe sets the pod template's ReadinessProbe for Nginx StatefulSet containers. This probe can then be controlled with BreakHttpProbe() and RestoreHttpProbe(). Note that this cannot be used together with PauseNewPods().

func (*StatefulSetTester) SortStatefulPods added in v1.7.0

func (s *StatefulSetTester) SortStatefulPods(pods *v1.PodList)

SortStatefulPods sorts pods by their ordinals

func (*StatefulSetTester) UpdateReplicas added in v1.6.0

func (s *StatefulSetTester) UpdateReplicas(ss *apps.StatefulSet, count int32)

UpdateReplicas updates the replicas of ss to count.

func (*StatefulSetTester) VerifyPodAtIndex added in v1.6.0

func (s *StatefulSetTester) VerifyPodAtIndex(index int, ss *apps.StatefulSet, verify VerifyStatefulPodFunc)

VerifyPodAtIndex applies a visitor patter to the Pod at index in ss. verify is applied to the Pod to "visit" it.

func (*StatefulSetTester) WaitForPartitionedRollingUpdate added in v1.7.0

func (s *StatefulSetTester) WaitForPartitionedRollingUpdate(set *apps.StatefulSet) (*apps.StatefulSet, *v1.PodList)

WaitForPartitionedRollingUpdate waits for all Pods in set to exist and have the correct revision. set must have a RollingUpdateStatefulSetStrategyType with a non-nil RollingUpdate and Partition. All Pods with ordinals less than or equal to the Partition are expected to be at set's current revision. All other Pods are expected to be at its update revision.

func (*StatefulSetTester) WaitForPodNotReady added in v1.7.0

func (s *StatefulSetTester) WaitForPodNotReady(set *apps.StatefulSet, podName string) (*apps.StatefulSet, *v1.PodList)

WaitForPodNotReady waist for the Pod named podName in set to exist and to not have a Ready condition.

func (*StatefulSetTester) WaitForPodReady added in v1.7.0

func (s *StatefulSetTester) WaitForPodReady(set *apps.StatefulSet, podName string) (*apps.StatefulSet, *v1.PodList)

WaitForPodReady waits for the Pod named podName in set to exist and have a Ready condition.

func (*StatefulSetTester) WaitForRollingUpdate added in v1.7.0

func (s *StatefulSetTester) WaitForRollingUpdate(set *apps.StatefulSet) (*apps.StatefulSet, *v1.PodList)

WaitForRollingUpdate waits for all Pods in set to exist and have the correct revision and for the RollingUpdate to complete. set must have a RollingUpdateStatefulSetStrategyType.

func (*StatefulSetTester) WaitForRunning added in v1.7.8

func (s *StatefulSetTester) WaitForRunning(numPodsRunning, numPodsReady int32, ss *apps.StatefulSet)

WaitForRunning waits for numPodsRunning in ss to be Running and for the first numPodsReady ordinals to be Ready.

func (*StatefulSetTester) WaitForRunningAndNotReady added in v1.6.0

func (s *StatefulSetTester) WaitForRunningAndNotReady(numStatefulPods int32, ss *apps.StatefulSet)

WaitForRunningAndReady waits for numStatefulPods in ss to be Running and not Ready.

func (*StatefulSetTester) WaitForRunningAndReady added in v1.6.0

func (s *StatefulSetTester) WaitForRunningAndReady(numStatefulPods int32, ss *apps.StatefulSet)

WaitForRunningAndReady waits for numStatefulPods in ss to be Running and Ready.

func (*StatefulSetTester) WaitForState added in v1.7.0

func (s *StatefulSetTester) WaitForState(ss *apps.StatefulSet, until func(*apps.StatefulSet, *v1.PodList) (bool, error))

WaitForState periodically polls for the ss and its pods until the until function returns either true or an error

func (*StatefulSetTester) WaitForStatus added in v1.6.0

func (s *StatefulSetTester) WaitForStatus(set *apps.StatefulSet) *apps.StatefulSet

WaitForStatus waits for the StatefulSetStatus's ObservedGeneration to be greater than or equal to set's Generation. The returned StatefulSet contains such a StatefulSetStatus

func (*StatefulSetTester) WaitForStatusReadyReplicas added in v1.7.0

func (s *StatefulSetTester) WaitForStatusReadyReplicas(ss *apps.StatefulSet, expectedReplicas int32)

WaitForStatusReadyReplicas waits for the ss.Status.ReadyReplicas to be equal to expectedReplicas

func (*StatefulSetTester) WaitForStatusReplicas added in v1.7.0

func (s *StatefulSetTester) WaitForStatusReplicas(ss *apps.StatefulSet, expectedReplicas int32)

WaitForStatusReplicas waits for the ss.Status.Replicas to be equal to expectedReplicas

type TestContextType

type TestContextType struct {
	KubeConfig         string
	KubeContext        string
	KubeAPIContentType string
	KubeVolumeDir      string
	CertDir            string
	Host               string
	// TODO: Deprecating this over time... instead just use gobindata_util.go , see #23987.
	RepoRoot                string
	DockershimCheckpointDir string
	// ListImages will list off all images that are used then quit
	ListImages bool

	// Provider identifies the infrastructure provider (gce, gke, aws)
	Provider string

	// Tooling is the tooling in use (e.g. kops, gke).  Provider is the cloud provider and might not uniquely identify the tooling.
	Tooling string

	CloudConfig    CloudConfig
	KubectlPath    string
	OutputDir      string
	ReportDir      string
	ReportPrefix   string
	Prefix         string
	MinStartupPods int
	// Timeout for waiting for system pods to be running
	SystemPodsStartupTimeout    time.Duration
	EtcdUpgradeStorage          string
	EtcdUpgradeVersion          string
	IngressUpgradeImage         string
	GCEUpgradeScript            string
	ContainerRuntime            string
	ContainerRuntimeEndpoint    string
	ContainerRuntimeProcessName string
	ContainerRuntimePidFile     string
	// SystemdServices are comma separated list of systemd services the test framework
	// will dump logs for.
	SystemdServices string
	// DumpSystemdJournal controls whether to dump the full systemd journal.
	DumpSystemdJournal       bool
	ImageServiceEndpoint     string
	MasterOSDistro           string
	NodeOSDistro             string
	VerifyServiceAccount     bool
	DeleteNamespace          bool
	DeleteNamespaceOnFailure bool
	AllowedNotReadyNodes     int
	CleanStart               bool
	// If set to 'true' or 'all' framework will start a goroutine monitoring resource usage of system add-ons.
	// It will read the data every 30 seconds from all Nodes and print summary during afterEach. If set to 'master'
	// only master Node will be monitored.
	GatherKubeSystemResourceUsageData string
	GatherLogsSizes                   bool
	GatherMetricsAfterTest            string
	GatherSuiteMetricsAfterTest       bool
	MaxNodesToGather                  int
	AllowGatheringProfiles            bool
	// If set to 'true' framework will gather ClusterAutoscaler metrics when gathering them for other components.
	IncludeClusterAutoscalerMetrics bool
	// Currently supported values are 'hr' for human-readable and 'json'. It's a comma separated list.
	OutputPrintType string
	// NodeSchedulableTimeout is the timeout for waiting for all nodes to be schedulable.
	NodeSchedulableTimeout time.Duration
	// SystemDaemonsetStartupTimeout is the timeout for waiting for all system daemonsets to be ready.
	SystemDaemonsetStartupTimeout time.Duration
	// CreateTestingNS is responsible for creating namespace used for executing e2e tests.
	// It accepts namespace base name, which will be prepended with e2e prefix, kube client
	// and labels to be applied to a namespace.
	CreateTestingNS CreateTestingNSFn
	// If set to true test will dump data about the namespace in which test was running.
	DumpLogsOnFailure bool
	// Disables dumping cluster log from master and nodes after all tests.
	DisableLogDump bool
	// Path to the GCS artifacts directory to dump logs from nodes. Logexporter gets enabled if this is non-empty.
	LogexporterGCSPath string
	// featureGates is a map of feature names to bools that enable or disable alpha/experimental features.
	FeatureGates map[string]bool
	// Node e2e specific test context
	NodeTestContextType
	// Monitoring solution that is used in current cluster.
	ClusterMonitoringMode string
	// Separate Prometheus monitoring deployed in cluster
	EnablePrometheusMonitoring bool

	// Indicates what path the kubernetes-anywhere is installed on
	KubernetesAnywherePath string

	// The DNS Domain of the cluster.
	ClusterDNSDomain string

	// The configration of NodeKiller.
	NodeKiller NodeKillerConfig
}

TestContextType contains test settings and global state. Due to historic reasons, it is a mixture of items managed by the test framework itself, cloud providers and individual tests. The goal is to move anything not required by the framework into the code which uses the settings.

The recommendation for those settings is:

  • They are stored in their own context structure or local variables.
  • The standard `flag` package is used to register them. The flag name should follow the pattern <part1>.<part2>....<partn> where the prefix is unlikely to conflict with other tests or standard packages and each part is in lower camel case. For example, test/e2e/storage/csi/context.go could define storage.csi.numIterations.
  • framework/config can be used to simplify the registration of multiple options with a single function call: var storageCSI { NumIterations `default:"1" usage:"number of iterations"` } _ config.AddOptions(&storageCSI, "storage.csi")
  • The direct use Viper in tests is possible, but discouraged because it only works in test suites which use Viper (which is not required) and the supported options cannot be discovered by a test suite user.

Test suite authors can use framework/viper to make all command line parameters also configurable via a configuration file.

var TestContext TestContextType

type TestDataSummary

type TestDataSummary interface {
	SummaryKind() string
	PrintHumanReadable() string
	PrintJSON() string
}

type TimestampedSize

type TimestampedSize struct {
	// contains filtered or unexported fields
}

TimestampedSize contains a size together with a time of measurement.

type UDPPokeParams added in v1.13.6

type UDPPokeParams struct {
	Timeout  time.Duration
	Response string
}

type UDPPokeResult added in v1.13.6

type UDPPokeResult struct {
	Status   UDPPokeStatus
	Error    error  // if there was any error
	Response []byte // if code != 0
}

func PokeUDP added in v1.13.6

func PokeUDP(host string, port int, request string, params *UDPPokeParams) UDPPokeResult

PokeUDP tries to connect to a host on a port and send the given request. Callers can specify additional success parameters, if desired.

The result status will be characterized as precisely as possible, given the known users of this.

The result error will be populated for any status other than Success.

The result response will be populated if the UDP transaction was completed, even if the other test params make this a failure).

type UDPPokeStatus added in v1.13.6

type UDPPokeStatus string
const (
	UDPSuccess UDPPokeStatus = "Success"
	UDPError   UDPPokeStatus = "UnknownError"
	// Any time we add new errors, we should audit all callers of this.
	UDPTimeout     UDPPokeStatus = "TimedOut"
	UDPRefused     UDPPokeStatus = "ConnectionRefused"
	UDPBadResponse UDPPokeStatus = "BadResponse"
)

type VerifyStatefulPodFunc added in v1.6.0

type VerifyStatefulPodFunc func(*v1.Pod)

VerifyStatefulPodFunc is a func that examines a StatefulSetPod.

type VolumeTest added in v1.7.0

type VolumeTest struct {
	Volume          v1.VolumeSource
	File            string
	ExpectedContent string
}

VolumeTest contains a volume to mount into a client pod and its expected content.

type VolumeTestConfig added in v1.7.0

type VolumeTestConfig struct {
	Namespace string
	// Prefix of all pods. Typically the test name.
	Prefix string
	// Name of container image for the server pod.
	ServerImage string
	// Ports to export from the server pod. TCP only.
	ServerPorts []int
	// Commands to run in the container image.
	ServerCmds []string
	// Arguments to pass to the container image.
	ServerArgs []string
	// Volumes needed to be mounted to the server container from the host
	// map <host (source) path> -> <container (dst.) path>
	// if <host (source) path> is empty, mount a tmpfs emptydir
	ServerVolumes map[string]string
	// Message to wait for before starting clients
	ServerReadyMessage string
	// Wait for the pod to terminate successfully
	// False indicates that the pod is long running
	WaitForCompletion bool
	// ServerNodeName is the spec.nodeName to run server pod on.  Default is any node.
	ServerNodeName string
	// ClientNodeName is the spec.nodeName to run client pod on.  Default is any node.
	ClientNodeName string
	// NodeSelector to use in pod spec (server, client and injector pods).
	NodeSelector map[string]string
}

Configuration of one tests. The test consist of: - server pod - runs serverImage, exports ports[] - client pod - does not need any special configuration

func NewGlusterfsServer added in v1.7.15

func NewGlusterfsServer(cs clientset.Interface, namespace string) (config VolumeTestConfig, pod *v1.Pod, ip string)

GlusterFS-specific wrapper for CreateStorageServer. Also creates the gluster endpoints object.

func NewISCSIServer added in v1.8.0

func NewISCSIServer(cs clientset.Interface, namespace string) (config VolumeTestConfig, pod *v1.Pod, ip string)

iSCSI-specific wrapper for CreateStorageServer.

func NewNFSServer added in v1.7.15

func NewNFSServer(cs clientset.Interface, namespace string, args []string) (config VolumeTestConfig, pod *v1.Pod, ip string)

NFS-specific wrapper for CreateStorageServer.

func NewRBDServer added in v1.8.0

func NewRBDServer(cs clientset.Interface, namespace string) (config VolumeTestConfig, pod *v1.Pod, secret *v1.Secret, ip string)

CephRBD-specific wrapper for CreateStorageServer.

type What added in v1.13.1

type What struct {
	Kind string `json:"kind"`
}

What is a subset of metav1.TypeMeta which (in contrast to metav1.TypeMeta itself) satisfies the runtime.Object interface.

func (*What) DeepCopy added in v1.13.1

func (in *What) DeepCopy() *What

func (*What) DeepCopyInto added in v1.13.1

func (in *What) DeepCopyInto(out *What)

func (*What) DeepCopyObject added in v1.13.1

func (in *What) DeepCopyObject() runtime.Object

func (*What) GetObjectKind added in v1.13.1

func (in *What) GetObjectKind() schema.ObjectKind

type WorkItem

type WorkItem struct {
	// contains filtered or unexported fields
}

WorkItem is a command for a worker that contains an IP of machine from which we want to gather data and paths to all files we're interested in.

Directories

Path Synopsis
Package config simplifies the declaration of configuration options.
Package config simplifies the declaration of configuration options.
Package ginkgowrapper wraps Ginkgo Fail and Skip functions to panic with structured data instead of a constant string.
Package ginkgowrapper wraps Ginkgo Fail and Skip functions to panic with structured data instead of a constant string.
Package podlogs enables live capturing of all events and log messages for some or all pods in a namespace as they get generated.
Package podlogs enables live capturing of all events and log messages for some or all pods in a namespace as they get generated.
providers
aws
gce
Package testfiles provides a wrapper around various optional ways of retrieving additional files needed during a test run: - builtin bindata - filesystem access Because it is a is self-contained package, it can be used by test/e2e/framework and test/e2e/manifest without creating a circular dependency.
Package testfiles provides a wrapper around various optional ways of retrieving additional files needed during a test run: - builtin bindata - filesystem access Because it is a is self-contained package, it can be used by test/e2e/framework and test/e2e/manifest without creating a circular dependency.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL